BMW Cooling System Parts & Accessories for BMW 3 Series E92 (2007-2013)

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E9X N55 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E82/88 and E90/92/93 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your N55-equipped BMW today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Aluminum Coolant Bleeder Screw Ball Stud 6mm Fitting Expansion Tank Cap Coolant Level Sensor Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Installation:

To aid in the installation process, we've assembled a start-to-finish installation guide, including detailed instructions on removing your factory cooling expansion tank and associated components.

Click HERE for Installation Instructions

Track-tested and street-ready. the ULTIMATE cooling system upgrade for your N54 or N55!

Ditch your failure-prone plastic end tanks and increase cooling capacity by 25%, all without modifying your core support or accompanying shrouds. The CSFxTurner Performance Triple-Pass Radiator is the best cooling system upgrade for your N54/N55-equipped BMW!

The BMW 135i and 335i deliver serious performance straight from the factory, thanks to the twin-turbocharged N54 and single-turbo N55 engines. With strong midrange torque, high-revving capabilities, and proven tuning potential, these engines punch well above their weight. However, while the powertrain excels, the factory cooling system often falls short, especially under sustained boost or track conditions. Heat soak, rising coolant temps, and long-term thermal stress are common issues for enthusiasts pushing their N54 or N55 hard, making a performance radiator an essential upgrade for reliability and consistency.

Recognizing the critical need for increased cooling capacity, the team at Turner Motorsport partnered with CSF Race, world leaders in high-performance cooling systems with over 50 years of experience. The result is an Upgraded Performance Radiator: a high-performance, motorsport-grade upgrade engineered to keep your N54/N55 cooler and on the track for longer.

Design:

CSF-Exclusive "B-Tube" Technology
Unlike conventional "O-tube" designs, CSF’s patented "B-tube" structure increases wall strength while creating a more efficient flow path. This alone accounts for a 15% increase in cooling capacity over an OE "O-tube" radiator!
Dual Core Design
2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
Two-Row Compact Structure
This radiator was designed with precise fitment in mind. While total tube count and size are increased, the overall radiator dimensions stay the same as OE, ensuring a drop-in fit with zero modifications required.
25% Increase in Cooling Capacity
All of the above design features translate to a massive 25% cooling increase over the stock radiator!
FEATURES & BENEFITS

Direct-fit upgrade, no modifications required!
Accepts all OEM attachments via CNC-machined "Quick-Connect" hose ends and accessory mounting provisions
TIG-welded aluminum construction provides increased durability
An all-aluminum drain plug replaces the weak OE plastic unit, ensuring seamless functionality for the life of the radiator
Increased cooling efficiency for high-performance and racing use
Aluminum drain plug
Designed and tested by Turner Motorsport in collaboration with CSF Race
Backed by the Turner Lifetime Replacement Program
Every unit features precision CNC-machined brackets and OE-style connections for a seamless, drop-in installation using factory or aftermarket hoses. Whether you're building a track weapon or a high-horsepower street car, this Turner x CSF radiator is the cooling solution your N54 or N55 needs to perform reliably under pressure. All backed by the Turner Lifetime Replacement Program.

This is the upper radiator hose that goes from the engine to the top of the radiator with either N51 or N52 enigne.

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2009+ Z4 BMW Z4 sDrive30i

This is the radiator drain plug (petcock valve) for manual transmission E82 and E9X models. The plug actually has two drains built in - the traditional blue petcock valve which is part of the hex head. If you drain the coolant from your radiator through this plug you could be in for a nasty surprise. The hex plug has tabs that lock it into position in the factory BMW radiator. Once it's installed the tabs lock in place. But if you remove the hex completely, the tabs snap off and the plug will no longer seal correctly! Do not drain your coolant without having one of these on hand as a spare! It's cheap insurance against a definite leak later on.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Fits manual transmission only.

Note: the Behr OEM radiator that we sell does not use this same drain plug. It has it's own drain plug that does not use the tabs. You won't need the factory BMW drain plug ever again.

Also known as a Genuine BMW Control Sleeve
This item fits the following BMW Chassis:
2008-2013 E82 BMW 135i 135is 1M Coupe
2013+ E84 BMW X1 sDrive28i X1 xDrive28i X1 xDrive35i
2009+ E89 BMW Z4 sDrive28i Z4 sDrive35i Z4 sDrive35is
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is- Convertible
Fits BMW Engines including:
N20,N54,N54T,N55
 

Replace your cracked or leaking lower radiator hose with this BMW part. The lower radiator hose goes to the lower right side of the radiator. This hose has the quick connect locking ends so that hose clamps are not required.

Genuine BMW Hose From Radiator Bottom - Thermostat -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N55