BMW Cooling System Parts & Accessories for BMW 3 Series E92 (2007-2013)

BMW & MINI Universal Oil Cooler - 10 Row is a versatile cooling solution designed to enhance the performance and reliability of BMW and MINI vehicles. This high-quality oil cooler provides efficient cooling for the engine oil, ensuring optimal operating temperatures and extending the life of vital engine components.

Crafted with precision engineering and durable materials, the BMW & MINI Universal Oil Cooler - 10 Row is compatible with a wide range of BMW and MINI models, offering versatility and ease of installation. It effectively dissipates heat from the engine oil, reducing the risk of overheating and engine damage.

• Enhances performance and reliability of BMW and MINI vehicles
• Efficient cooling for engine oil, ensuring optimal operating temperatures
• Extends the life of vital engine components
• Compatible with a wide range of BMW and MINI models
• Versatile and easy to install
• Crafted with precision engineering and durable materials

Investing in the BMW & MINI Universal Oil Cooler - 10 Row is a smart choice for BMW and MINI owners looking to improve their vehicle's performance and longevity.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Radiator -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N51
 

This is the radiator drain plug (petcock valve) for manual transmission E82 and E9X models. The plug actually has two drains built in - the traditional blue petcock valve which is part of the hex head. If you drain the coolant from your radiator through this plug you could be in for a nasty surprise. The hex plug has tabs that lock it into position in the factory BMW radiator. Once it's installed the tabs lock in place. But if you remove the hex completely, the tabs snap off and the plug will no longer seal correctly! Do not drain your coolant without having one of these on hand as a spare! It's cheap insurance against a definite leak later on.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Fits manual transmission only.

Note: the Behr OEM radiator that we sell does not use this same drain plug. It has it's own drain plug that does not use the tabs. You won't need the factory BMW drain plug ever again.

Also known as a Genuine BMW Control Sleeve
This item fits the following BMW Chassis:
2008-2013 E82 BMW 135i 135is 1M Coupe
2013+ E84 BMW X1 sDrive28i X1 xDrive28i X1 xDrive35i
2009+ E89 BMW Z4 sDrive28i Z4 sDrive35i Z4 sDrive35is
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is- Convertible
Fits BMW Engines including:
N20,N54,N54T,N55
 

Universal Oil Cooler Black - 10 Row is engineered to maintain optimal oil temperatures and ensure peak engine performance under various driving conditions. This high-performance oil cooler effectively reduces oil temperatures, preventing a drop in pressure and maintaining proper engine lubrication. Featuring a robust 10-row design, it offers superior cooling efficiency compared to standard coolers.

• Efficient Cooling: The 10-row design enhances cooling capacity to manage high oil temperatures effectively.
• Durable Construction: Black finish provides durability and resistance to environmental factors.
• Optimized Performance: Helps prevent a drop in oil pressure and maintains proper engine lubrication.
• Versatile Fitment: Universal design suitable for various vehicles and applications.
• Compact Size: Overall dimensions of 12.95" x 3.8" x 1.97" and core dimensions of 11" x 2.76" x 1.97" ensure a good fit in most engine bays.

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.   

Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.  

For vehicles with plastic thermostat housing 

This Genuine BMW radiator expansion tank (coolant reservoir) is used on many BMW's with the N20, N51, N52 and N54 engines. Due to the higher operating temperatures of these engines plastic components are more susceptible to failure. If you are overhauling your coolant system, now is the time to consider preventative replacing this expansion tank.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 128i 135i
2011+ E82 BMW 128i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E92 BMW 335is - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2013+ E84 BMW X1 sDrive28i X1 xDrive28i
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation.
Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time.
Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency.
Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit.
Kit Includes:

Upper Radiator Hose
Lower Radiator Hose
Stainless Steel Worm-Drive Hose Clamps (4)
Replaces OEM Part Numbers: 17127599450 & 17127540127. Can be used with your factory connectors.

• Upgraded Billet 6061-T6 connectors for enhanced durability
• Corrosion-resistant black anodized finish
• 6-ply molded silicone hoses for superior performance
• Factory-shaped design for easy installation