Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E92 Control Arm Replacements & Upgrades

BMW E92 Control Arm Replacements & Upgrades Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.
You're currently viewing parts for your (E92) 3-Series Coupe 2007-2013. Reset your chassis
For accurate results, specify your model below.
Rear Guide Rod - Right - E82, E9X Replacement stock guide rod for the E82 1-series, E9X 3-series, and E84 X1. The guide rod helps to locate the rear suspension to the subframe and controls changes in the alignment as the suspension moves. As the rubber bushings wear, the alignment can change drastically, leading to a loose or floating handling feel. This is the stock replacement for the Right/Passenger's side.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Genuine BMW
Part #: 33326782238
Price: $151.92 (USD) 
$179.09 (15% off MSRP)
Ships on Aug 7, 2018
Free Shipping Free Shipping
Quantity:   
OEM Lemforder Lower Control Arm - E9x E84

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 31126768989
Price: $99.90 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Rear Toe Control Arm - Left and Right - E82, E9X Replacement stock toe control arm (track strut) for the E82 1-series and E9X 3-series. The track strut controls the toe alignment of the rear suspension (whether the tire points in or out on a horizontal axis) It also helps to locate the suspension to the subframe. As the rubber bushings wear, the tire can actually drift in and out of alignment, resulting in a loose or unstable handling feel (especially when accelerating in a corner). This is the stock replacement that fits either the Left or Right side of the vehicle.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Packaged by Turner
Part #: 33326763471
Price: $76.25 (USD) 
$89.89 (Sale - Save 15%)
Ships in 6 days
Free Shipping Free Shipping
on orders $99 and up
OEM Lemforder Front Lower Control Arm - Left - E88, E82, E9X, E84 X1

This replacement leftt front lower control arm (wisbone) is for the E82 and E9X chassis (non Xi or M). This is a direct replacement part manufactured using the Original Equipment Manufacturer's specs. This includes both inner sealed monoball joint and outer ball joint. The outer ball joint points up on this chassis. Price is for the left front (driver's side).

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335i - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Lemforder
Part #: 31126770849
Price: $10.36 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Turner Motorsport Front control arm bearing set - E9x 325i, 328i, 330i, 335i/is RWD

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints goes back to those we designed and used in our IMSA E90 328i and E92 M3 race cars (GS class Champions in 2011). We wanted to offer as many BMW owners possible a similar level of handling, precision, and control for the track and street.

Utilizing a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

 

 

 

Click Play Button to View

 

We offer these control arms with the monoball bearings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

 

Features:

Control Arm Bearing

  • CNC machined corrosion resistant 304 Stainless steel shell, bolt sleeves, & snap rings
  • Sealed spherical ball joint for long service life & maintained OE fitment
  • Suspension pre-load is no longer required when torquing the control arm hardware

 

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance.
  • Improved road feel without undesirable NVH.

 

 

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335i - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Turner Motorsport
Part #: 013277TMS07KT
Price: $399.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Front Upper Control Arm - Right - E82, E89, E9X This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OEM replacement and fits all non-Xi BMW E90 E92 E93 325i 328i 330i 335i models, E82 128i 135i, and E89 Z4. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer at a fraction of the cost for the OE BMW part.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i 335is
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
TRW
Part #: 31126769798
Price: $84.95 (USD) 
Ships in 6 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Front Headlight Adjusting Rod - E9x M3, E82 1M, F80 M3, F82 M4 This rod attaches to the front left control arm helps to control the level of the xenon lights. If this part fails or is removed the headlights will be aimed too high.

This item fits the following BMWs:
2011 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
2015+ F80 BMW M3
2015+ F82 BMW M4
Genuine BMW
Part #: 37142283867
Price: $21.04 (USD) 
$23.99 (12% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Repair Kit, Wishbone, Right - Value Line - 31122405860 Genuine BMW Repair Kit, Wishbone, Right - 31122405860
Genuine BMW
Part #: 31122405860
Price: $99.11 (USD) 
$113.00 (12% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
Meyle Heavy Duty Front Right Curved Tension Strut - E82/88 E9X

The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering. 

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel. 

This control arm comes with the Meyle HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. 

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty. 

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
2007-2013 E82/88 BMW All submodels
2006-2009 E9X BMW Non-M

Meyle HD
Part #: 31126769798
Price: $99.51 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
E82/E9X Rear Lower Aluminum Trailing Arms (Pair)

The rear lower control arms on E82/E9X models are the weakest link in the rear suspension. The arm is made from folded sheetmetal and it bends and deforms easily. Not only will it deform from potholes and curbs, tow truck drivers love to hook onto them without realizing how weak they are. We have seen other race teams complete the box section to make them stronger. A bent arm will throw off the geometry in the suspension, potentially affecting handling and tire wear. These aluminum arms are both lighter and stronger than the factory sheetmetal arms and is the best solution for chronic bending of the stock arm. These are a direct replacement to your stock arms with no changes needed to your alignment. New high-grade hardware is included.

Note: the stock arm is designed from the factory to be intentionally weak. These arms will bend so that something else in the suspension does not break. Our race cars used the stock sheetmetal arm but we replaced them often. We found that it was better to finish a race with a bent arm than not finish due to a catastrophic failure. The ECS arms are still designed to be the weakest link but are far stronger than the factory arm and will not bend as easily.

This item fits the following BMWs:

2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

ECS
Part #: 001258ECS01
Price: $202.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Front Upper Control Arm Monoball Upgrade - Left and Right - E82, E89, E9X (including M models)

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

Sold as a pair for RWD models only.

Click here for installation instructions.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Turner Motorsport
Part #: TSUE9080QIS-ARMS
Price: $467.96 (USD) 
$519.95 (Sale - Save 10%)
Ships on Aug 13, 2018
Free Shipping Free Shipping
Quantity:   
Rear Guide Rod Upgrade - Right - E82, E9x These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Packaged by Turner
Part #: 33322283548
Price: $109.95 (USD) 
In Stock
Free Shipping Free Shipping
SPL Parts Caster Adjustable Tension/Trailing Rod Bushings - E8X E9X F8X

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

SPL Parts FKS Series Front Caster Rod Bushings (CRB) replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction.  This maintains optimum suspension geometry under load to improve braking and handling feedback.  Massive 1" sized FK Racing Bearings with self lubricating Teflon liners are used to ensure maximum performance and durability.  Innovative CNC machined offset bearing spacers provide +/- 4 degrees of caster adjustment.

SPL Parts Caster Rod Bushings Features:

  • 6061-T6 Aluminum bearing housing with outer knurl
  • 6061-T6 Aluminum offset spacers provide +/-4 degrees of caster adjustment
  • FK 1" spherical bearings
  • Made in the USA!

Fits the following BMWs:
2008-2013 E8X BMW All Submodels
2006-2013 E9X BMW RWD Submodels
2015+ F8X BMW M2/3/4

SPL Parts
Part #: SPLCRBE9X
Price: $299.00 (USD) 
Direct Ship
Quantity:   
SPL Parts Titanium Series Adjustable Front Lower Racing Control Arms - E8X E9X RWD

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

These SPL front lower control arms open up a wide range of adjustment for roll center, camber, and track width adjustment and allow for full articulation with the correct ball joint angle. Instead of using traditional jam nuts, the main arm is slotted to allow the use of pinch bolts and SPL rotating clamps on their exclusive adjuster, making it easier to lock in track width and camber specifications.

*DOES NOT include headlight adjusting rod

SPL Parts Billet Lower Control/Trailing Arms Feature:

  • Lightweight Aluminum and Titanium construction
  • Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment
  • Correct ball joint angle for full articulation
  • Rotating Clamp design allows for easy access to lock down alignment settings
  • Low friction 3 piece Teflon lined FK sphericals and Heim joints/rod ends
  • Multiple size Stainless Steel roll center spacers for precise adjustment

Fits the following BMWs:
2006-2013 E9X BMW RWD Submodels
2008-2013 E82/88 BMW All  Submodels

SPL Parts
Part #: SPLFLCARE9X
Price: $549.00 (USD) 
Direct Ship
Quantity:   
Front Upper Control Arm - Right - E82 1M, E9X M3 This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Packaged by Turner
Part #: 31102283576
Price: $93.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Front Upper Control Arm (no ball joint) - Right - E9X Xi AWD/xDrive This is a replacement right front upper control arm for 2006+ BMW E90 E92 3 series Xi models. This item is also known as the "traction strut" or "thrust arm". NOTE- Ball joint sold separately.

This item fits the following BMWs:
2007+ E90 3 Series BMW 325xi 328xi 330xi 335xi & xDrive Models
2007+ E92 3 Series BMW 328xi 328i xDrive 335xi 335i xDrive
Genuine BMW
Part #: 31126768984
Price: $134.36 (USD) 
$158.39 (15% off MSRP)
Ships in 6 days
Free Shipping Free Shipping
Quantity:   
OEM Lemforder Right Front Control Arm - E88 E82 E9X E89

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 31126769798
Price: $98.23 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
SPL Parts Titanium Series Adjustable Rear Toe Arms - E8X E9X Non-M

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined.

Technical Specifications:

  • Gundrilled 2024 Aluminum Links to reduce unsprung weight
  • 6061 Aluminum Clamps and Heim Joint Spacers
  • Titanium Socket Head Cap Screws
  • Rotating clamp design allows for easy access to lock down your alignment settings
  • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
  • Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Non-M
2008-2013 E8X BMW 128i 135i

SPL Parts
Part #: SPLRTAE9X
Price: $332.00 (USD) 
Direct Ship
Quantity:   
SPL Parts Eccentric Lockout Kit for Rear Toe Arms - E8X E9X RWD

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Factory BMW eccentric bolts only allow for small toe adjustments and often slip under hard cornering, effectively changing your alignment. SPL eccentric lockout kits eliminate stock eccentric bolts - you must have adjustable rear toe arms to utilize this kit in your setup; 

Technical Specifications:

  • CNC machined from 6061 aluminum
  • CAD plated grade 10.9 hardware
  • Include washers and bolts for both sides of your vehicle.
  • Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Sub-Models
2008-2013 E82 BMW All Submodels

SPL Parts
Part #: SPLELE9X
Price: $50.00 (USD) 
Direct Ship
Quantity:   
Meyle Heavy Duty Front Left Curved Tension Strut - E82/E88 E9X

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

Fits the following BMWs:
2006-2013 E9X BMW RWD Non-M
2007-2013 E82/88 BMW 128i 135i

Meyle HD
Part #: 31126769797
Price: $93.51 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
M3 Front Upper+Lower Control Arm Upgrade - Left and Right - E82, E9X

The front upper and lower control arms from the E9X M3 are a direct bolt-in replacement upgrade for the stock parts on the non-M E90/E91/E92/E93 3-series and E82/E88 1-series. With the M3 components the fluid-filled bushings of the standard suspension are replaced with solid rubber cores or a sealed monoball-joint, making the suspension stiffer, more responsive, and longer lasting.

This package includes:

  • M3 front upper control arms (thrust arm, tension strut) (31102283575 and 31102283576)
    The upper control arms eliminate the fluid-filled stock bushing which is very prone to leaking the fluid and cease being effective. The solid rubber M3 bushing is also a bit stiffer for more precise steering and control.
  • M3 front upper inner bushings (31102283579)
  • M3 front lower control arms (wishbone) (31102283577 and 31102283578)
    The M3 lower control arm has a sealed inner bearing instead of the rubber-isolated stock bushing. The bearing allows the lower arm to rotate freely instead of binding up. It's also a bit longer and curved slightly to give more negative camber (adds .75 of negative camber).

Optional: M3 headlight adjusting rod (37142283867). This rod corrects the headlights for your ride height. The original non-M leveling rod will not work on the new M3 control arm. This rod is required on all cars with Xenon headlights but not needed for standard halogen lights.

With the added negative camber the steering is sharper and understeer is reduced. And the stiffer bushings and bearings deflect less which also improves steering feel and response. Since all of these parts are from the M3 there is no question on quality or longevity; no doubt as to their effectiveness or reputation. There's almost no downside to this upgrade. These are intended for street cars but even lightly tracked cars will see significant benefits to the handling and response.

We offer this package with the OEM TRW brand components or with Original BMW branded parts (stamped with TRW logo).

This M3 upgrade package fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3- Convertible

2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

 

Packaged by Turner
Part #: TMS12059
Price: $364.95 (USD) 
Ships on Sep 27, 2018
Free Shipping Free Shipping
Front Lower Control Arm - Left or Right - E9X Xi AWD/xDrive This is a replacement Front Lower Control Arm for 2006+ BMW E90 E92 3 series Xi models. Interchangeable between left and right sides.

This item fits the following BMWs:
2006+ E90 3 Series BMW 325xi 328xi 330xi 335xi & xDrive Models
2006+ E92 3 Series BMW 328xi 328i xDrive 335xi 335i xDrive
Genuine BMW
Part #: 31126768989
Price: $117.97 (USD) 
$139.07 (15% off MSRP)
Ships in 6 days
Free Shipping Free Shipping
Quantity:   
Complete Front Upper Control Arm Upgrades - E82, E9X (non-M, non-Xi) The upper control arm (also called the tension strut or thrust arm) is the most critical bushing in the front suspension. It's the bushing that takes the bulk of the force from the tire and the one that wears out the easist. The stock non-M rubber bushings are filled with a dampening fluid that absorbs vibration and harsh suspension movements. However, this fluid is prone to leaking leaving you with a significantly weaker bushing. A worn thrust arm bushing will have significant slop and play which will lead to poor and imprecise steering feel, loose handling, and clunking noises. We offer a range of bushing options so you can either restore the original handling and feel or upgrade to a bushing that better suits your needs and expectations. We have put together this selection of stock and upgraded thrust arms so you can make direct comparisons of all of the options out there. Click on the blue banners below for detailed information on each upper control arm option.

Note that BMW recommends replacing the control arms after every other bushing change. The arms should not be used again if the bushings have been replaced once already. Our control arm upgrades are sold as complete packages - a pair of control arms (left and right) with new inner bushings already pressed in, new outer ball joints, and any necessary hardware.

+ Option 1 - Stock Replacement
(click to expand)
This option is the base set of replacement arms, ball joints, and bushings. These are direct replacement fluid-filled bushings that are no different than the parts that came on the car originally. If you want the same ride and handling characteristics as when the car was straight off the showroom, this is the best package for you to buy. Simply install your new parts, have an alignment done, and you're on your way!
Option 1 Package Includes:
  • Left & Right Upper Control Arms with ball joints (31126769797 and 31126769798) aka Thrust Arm, Tension Strut, or Pull Rod.
  • Outer ball joint securing nuts
  • Inner control arm bushings (31120393540)
+ Option 2 - Meyle HD Upgrade
(click to expand)
The Meyle HD arms and bushings are also a direct replacement for the original arms but feature stronger, more durable components. The Meyle HD outer ball joint is much larger and a higher-grade material than the factory spec. The larger ball joint will last longer and the dust boot is stronger as well to keep out moisture and gritty contaminants. The inner HD bushing is a solid rubber piece instead of the fluid-filled stock bushings. It's also stiffer and deflects less to give a more sporty and crisp handling, and sharper steering. All alignment specs remain as per factory.
Option 2 Package Includes:
  • Meyle HD Left & Right Upper Control Arms with HD ball joints (31126769797MY and 31126769798MY) aka Thrust Arm, Tension Strut, or Pull Rod.
  • Outer ball joint securing nuts
  • Meyle HD inner control arm bushings (31120304308MY)
+ Option 3 - OEM M3 Upgrade
(click to expand)
The M3 control arm upgrade is for people who want a very serious change in the ride/handling of the car. These are the factory OEM E9X M3 upper control arms so the ride will not be much different than a standard M3. But it is a very large jump compared to the stock E9X arms and bushings since they are not fluid-filled and harder rubber compound than the stock or Meyle HD bushings. These are a direct replacement to the original arms and do not require any modification to install and will not change the alignment settings. But for the best results, we recommend only using these with the M3 lower control arms (wishbones).
Option 3 Package Includes:
  • OEM M3 Left & Right Upper Control Arms with ball joints (31102283575 and 31102283576) aka Thrust Arm, Tension Strut, or Pull Rod.
  • Outer ball joint securing nuts
  • OEM M3 inner control arm bushings (31102283579)
+ Option 4 - Turner Sealed Monoball
(click to expand)
One step beyond the M3 bushings in terms of performance are these monoball bearing bushings developed by Turner Motorsport. These were developed for our street project E90s with feedback from a similar setup on our E90 and E92 racecars. But for this application we chose a sealed monoball with an inner liner to isolate the added noise, vibration, and harshness that a full solid monoball bearing will have. Our monoball thrust arm bushings are more at home on the street than other kits that are advertised as race bushings. The advantage of the monoball bearing is that it will not deflect under load. The rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. Our monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and longer bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.
Option 4 Package Includes:
  • Left & Right Upper Control Arms with ball joints (31102283575 and 31102283576) aka Thrust Arm, Tension Strut, or Pull Rod.
  • Outer ball joint securing nuts
  • Turner inner control arm monoball bushings (TSUE9080QIS)

These Upper Control Arms will fit the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Packaged by Turner
Part #: TMS11990
Price: $169.90 (USD) 
Ships in 6 days
Free Shipping Free Shipping
OEM Lemforder Rear Upper Control Arm - E88 E82 E9x

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 33326777980
Price: $109.76 (USD) 
Ships in 5 days
Free Shipping Free Shipping
Quantity:   
Front Upper Control Arm (no ball joint) - Left - E9X Xi AWD/xDrive This is a replacement left front upper control arm for 2006+ BMW E90 E92 3 series Xi models. This item is also known as the "traction strut" or "thrust arm". NOTE- Ball joint sold separately.

This item fits the following BMWs:
2007+ E90 3 Series BMW 325xi 328xi 330xi 335xi & xDrive Models
2007+ E92 3 Series BMW 328xi 328i xDrive 335xi 335i xDrive
Genuine BMW
Part #: 31126768983
Price: $134.36 (USD) 
$158.39 (15% off MSRP)
Ships in 6 days
Free Shipping Free Shipping
Quantity:   
M3 Rear Guide Rod Upgrade - Left and Right - E82, E9x

As Used on Project E92 335i
These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This package includes:

  • Left M3 Guide Rod - 33322283547
  • Right M3 Guide Rod - 33322283548

Buy as a package and save $$!

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i 1M Coupe
2006-2011  E90 BMW  325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012  E91 BMW  325xi 328i 328xi 328i xDrive - Wagon
2007-2013  E92 BMW  328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013  E93 BMW  328i 335i M3 - Convertible

 

Packaged by Turner
Part #: TMS12080
Price: $219.90 (USD) 
In Stock
Free Shipping Free Shipping
Rear Guide Rod Upgrade - Left - E82, E9x These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Packaged by Turner
Part #: 33322283547
Price: $109.95 (USD) 
In Stock
Free Shipping Free Shipping
OEM Lemforder Left Front Control Arm - E88 E82 E9X E89

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 31126769797
Price: $98.23 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
M3 Rear Upper Link Arm Upgrade - Left and Right - E82, E9x These M3 rear upper link arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal and tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This package includes:
  • Left M3 Upper Link Arm (Wishbone) - 33322283545
  • Right M3 Upper Link Arm (Wishbone) - 33322283546
  • M3 brake sensor brackets (x 2) - 34522283017 Buy as a package and save $$!

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
  • Turner Motorsport
    Part #: TMS12079
    Price: $463.80 (USD) 
    Ships in 6 days
    Free Shipping Free Shipping
    Quantity:   
    Rogue Engineering Toe Arm Upgrade - E9X & E82 Non-M

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    • 100% machined and anodized, 6061-T6 lightweight aluminum arms
    • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
    • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
    • Rod ends feature grease fittings, to allow for rod end serviceability.
    • Lighter than stock!  (Stock is 875g, RE arms are 640g)
    • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
    Rogue Engineering
    Part #: RE.E9X.TA
    Price: $289.00 (USD) 
    Ships in 6 days
    Quantity:   
    OEM Rein Front Control Arm - E84 E9X Front right control arm with factory installed bushing and ball joint.

    Failed control arms commonly cause vibration and shaking that is transmitted through the steering wheel, increasing with speed or braking. Symptoms may also include suspension noises, incorrect steering alignment, and accelerated tire wear.
    Rein
    Part #: 31126768989
    Price: $8.09 (USD) 
    Ships on Aug 7, 2018
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    SPL Parts Titanium Series Front Tension Rod Pair - E9X E8X F8X

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

    The SPL performance front thrust arms are perfect for when you need to have as much flexibility in suspension geometry as possible! Allowing for greatly increased caster adjustment and easy access adjustment, these thrust arms can be adjusted quickly at the track or in your garage to ensure the best steering feel and turn in response possible.

    SPL Titanium Series Front Tension Rod Features:

    • 6061 aluminum clamps and Heim joint spacers
    • Gundrilled and anodized 2024 aluminum links reduce unsprung weight
    • Titanium socket head cap screws
    • ASTM A574 socket head cap bolts used for maximum articulation with minimum tensile strength of 170,000 psi
    • Rotating clamp design allowing for easy access to change alignment settings
    • Stainless steel anti dive spacers
    • Hardened JMX high misalignment low friction 3-piece Teflon lined FK Heim joints/rod ends
    • Made in the USA

    Fits the following BMWs:
    2006-2013 E9X BMW RWD Submodels
    2008-2013 E8X BMW All Submodels
    2015+ F8X BMW M2/3/4

    SPL Parts
    Part #: SPLTRE9X
    Price: $529.00 (USD) 
    Direct Ship
    Quantity:   
    Front Upper and Lower Control Arm Monoball Upgrade - Left And Right - E82, E89, E9X (Including M Models)

    M3 upper and lower control arms are a known upgrade for non-M E82 and E9X chassis. But our Monoball Thurst Arms are even more of an upgrade over the stock M3 arms. This package bundles the Turner Monoball upper thrust arms with the stock M3 lower control arms. If there's one big fail point in the E82/E9X front suspension it's the thrust arms. The front inner thrust arm bushing is filled with dampening fluid that leaks over time. Once it's gone the bushing has the strength of a rubber band. Even though we sell two types of upgraded rubber bushings there was still room for improvement. For someone looking for superior performance and longevity these sealed monoball bushings are the best out there. 

    The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings, including the M3, move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. And when worn out, performance suffers. Our monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

    The lower M3 control arm bushings use a similar sealed monoball bushing instead of rubber. This package gives you monoball precision and performance with OE-quality components.

    This item fits the following BMWs: 
    2008-2012 E82 BMW 128i 135i 1M Coupe 
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan 
    2006-2012 E91 BMW 328i - Wagon 
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe 
    2007-2013 E93 BMW 328i 335i M3 - Convertible 
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

    Turner Motorsport
    Part #: e9x0031313tKT
    Price: $689.00 (USD) 
    Ships on Aug 13, 2018
    Free Shipping Free Shipping
    Quantity:   
    SPL Parts Titanium Series Adjustable Rear Toe Arms - E8X 1M, E9X M3

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined.

    Technical Specifications:

    • Gundrilled 2024 Aluminum Links to reduce unsprung weight
    • 6061 Aluminum Clamps and Heim Joint Spacers
    • Titanium Socket Head Cap Screws
    • Rotating clamp design allows for easy access to lock down your alignment settings
    • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
    • Made in the USA!

    Fits the following BMWs:
    2006-2013 E9X BMW M3
    2008-2013 E8X BMW 1 M

    SPL Parts
    Part #: SPLRTAE9M
    Price: $332.00 (USD) 
    Direct Ship
    Quantity:   
    SPL Parts Titanium Series Adjustable Rear Toe Arms with Eccentric Lockout Kit - E8X E9X Non-M

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined. In addition, this kit includes Eccentric lockout components. This guarantees that your toe alignment won't slip under aggressive driving due to an eccentric bolt.

    Technical Specifications:

    • Gundrilled 2024 Aluminum Links to reduce unsprung weight
    • 6061 Aluminum Clamps and Heim Joint Spacers
    • Titanium Socket Head Cap Screws
    • Rotating clamp design allows for easy access to lock down your alignment settings
    • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
    • 6061 Aluminum Eccentric Lockout Washers
    • Grade 10.9 Hex Cap Bolts with Lock Nuts
    • Made in the USA!

    Fits the following BMWs:
    2006-2013 E9X BMW RWD Non-M
    2008-2013 E8X BMW 128i 135i

    SPL Parts
    Part #: SPLRTAELE9X
    Price: $362.00 (USD) 
    Direct Ship
    Quantity:   
    SPL Parts Titanium Series Adjustable Rear Upper Camber Arms - E9X E8X

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    The stock rear wishbones/camber arms are prone to flexing under intense driving situations because they are curved. The SPL adjustable rear upper camber arms are a perfect fix for this, providing significantly stronger support and offer a wider range of camber adjustment for both stability and better handling.

    Technical specifications:

    • Black Anodized and Gundrilled 2024 Aluminum Links
    • 6061 Aluminum Clamps
    • Titanium Socket Head Cap Screws
    • Tapered Stainless Steel Knuckle Mount Spacers
    • FK Rod Ends
    • Made in the USA!

    Fits the following BMWs:
    2006-2013 E9X BMW RWD Submodels
    2008-2013 E8X BMW All Submodels

    SPL Parts
    Part #: SPLRWBE9X
    Price: $332.00 (USD) 
    Direct Ship
    Quantity:   
    Front Lower Control Arm - Left - E82 1M, E9X M3 This left/driver's front lower control arm # 31102283577 - also know as a wishbone. This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi) (also requires headlight rod, 37142283867). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2012 E92 BMW M3 Coupe
    2008-2012 E93 BMW M3 Convertible
    Packaged by Turner
    Part #: 31102283577X
    Price: $89.95 (USD) 
    In Stock
    OEM Lemforder Right Lower Control Arm/Tension Strut - E9X E84

    Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31126768984
    Price: $89.52 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Rear Toe Control Arm - E82 1M, E9X M3 This arm controls the toe alignment in the M3 rear suspension. When these bushings wear out the tire loses toe control and the tire has too much lateral in/out movement. This can make the handling feel very nervous and imprecise and like the rear end is steering itself.

    The rear toe arm is sold per side (both sides are the same). We offer this as the Original BMW part.

    This item fits the following BMWs:
    2012-2013 E82 BMW 1M Coupe
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible
    This fits 1M/M3 models only. It is not used on non-M models.
    Packaged by Turner
    Part #: 33322283549
    Price: $98.60 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Rogue Engineering Toe Arm Upgrade w/ Heavy Duty Rod Ends - E9X M3/ & E82 1 M Coupe

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    • 100% machined and anodized, 6061-T6 lightweight aluminum arms
    • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
    • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
    • Rod ends feature grease fittings, to allow for rod end serviceability.
    • Lighter than stock!  (Stock is 875g, RE arms are 640g)
    • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
    Rogue Engineering
    Part #: RE.E9X.TA.M3-UP
    Price: $354.00 (USD) 
    Ships in 6 days
    Quantity:   
    Genuine BMW Hex Bolt With Washer 31106763928

    Genuine BMW Hex Bolt With Washer - M12X1.5X115-8.8
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E89 Z4,E90,E92,E93

    Genuine BMW
    Part #: 31106763928
    Price: $8.78 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Lemforder Right Rear Upper Guide Rod/Control Air - E88 E82 E9X E84 Non-M

    Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33326782238
    Price: $56.73 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Front Upper Control Arm - Left - E82, E89, E9X This left/driver's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OEM replacement and fits all non-Xi BMW E90 E92 E93 325i 328i 330i 335i models, E82 128i 135i, and E89 Z4. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer at a fraction of the cost for the OE BMW part.

    This item fits the following BMWs:
    2008+ E82 BMW 128i 135i
    2006+ E90 BMW 325i 328i 330i 335i
    2007+ E92 BMW 328i 335i 335is
    2007+ E93 BMW 328i 335i 335is
    2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    TRW
    Part #: 31126769797
    Price: $84.95 (USD) 
    Ships in 6 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    SPL Parts Titanium Series Adjustable Rear Toe Arms with Eccentric Lockout Kit - E8X 1M, E9X M3

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined. In addition, this kit includes Eccentric lockout components. This guarantees that your toe alignment won't slip under aggressive driving due to an eccentric bolt.

    Technical Specifications:

    • Gundrilled 2024 Aluminum Links to reduce unsprung weight
    • 6061 Aluminum Clamps and Heim Joint Spacers
    • Titanium Socket Head Cap Screws
    • Rotating clamp design allows for easy access to lock down your alignment settings
    • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
    • 6061 Aluminum Eccentric Lockout Washers
    • Grade 10.9 Hex Cap Bolts with Lock Nuts
    • Made in the USA!

    Fits the following BMWs:
    2006-2013 E9X BMW M3
    2008-2013 E8X BMW 1 M

    SPL Parts
    Part #: SPLRTAELE9M
    Price: $362.00 (USD) 
    Direct Ship
    Quantity:   
    Front Upper Ball Joint - Left or Right - E9X Xi AWD/xDrive This is a replacement Front Upper Control Arm Ball Joint for 2006+ BMW E90 E92 3 series Xi models.

    This item fits the following BMWs:
    2007+ E90 3 Series BMW 325xi 328xi 330xi 335xi & xDrive Models
    2007+ E92 3 Series BMW 328xi 328i xDrive 335xi 335i xDrive
    Genuine BMW
    Part #: 31126768988
    Price: $74.78 (USD) 
    $90.19 (17% off MSRP)
    Ships in 6 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Rear Upper Link - Left and Right - E82, E9X Replacement stock upper link (wishbone) #33326777980 for the E82 1-series and E9X 3-series. The wishbone helps to locate the rear suspension to the subframe and controls changes in the alignment as the suspension moves. As the rubber bushings wear, the alignment can change drastically, leading to a loose or floating handling feel. This is the stock replacement that fits either the Left or Right of the car. Price is per arm.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Packaged by Turner
    Part #: 33326777980X
    Price: $132.95 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    OEM Lemforder Right Rear Upper Guide Rod/Control Air - E88 E82 E9X E84 Non-M

    Replacement stock guide rod for the E82 1-series, E9X 3-series, and E84 X1.

    The guide rod helps to locate the rear suspension to the subframe and controls changes in the alignment as the suspension moves. As the rubber bushings wear, the alignment can change drastically, leading to a loose or floating handling feel. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible

    Lemforder
    Part #: 33326782237
    Price: $56.17 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Rear Toe Control Arm - E82 1M, E9X M3 This arm controls the toe alignment in the M3 rear suspension. When these bushings wear out the tire loses toe control and the tire has too much lateral in/out movement. This can make the handling feel very nervous and imprecise and like the rear end is steering itself.

    The rear toe arm is sold per side (both sides are the same). We offer this as the Original BMW part.

    This item fits the following BMWs:
    2012-2013 E82 BMW 1M Coupe
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible
    This fits 1M/M3 models only. It is not used on non-M models.
    Genuine BMW
    Part #: 33322283549
    Price: $109.00 (USD) 
    $124.02 (12% off MSRP)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Left Lower Control Arm/Tension Strut - E9X E84

    Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31126768983
    Price: $88.02 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Genuine BMW Repair Kit For Wishbone - Value Line - 31122405863 Genuine BMW Repair Kit For Wishbone - 31122405863
    Genuine BMW
    Part #: 31122405863
    Price: $90.34 (USD) 
    $103.00 (12% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    SPL Parts Titanium Series Rear Upper Control Arms - E8X E9X RWD

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    The stock rear upper control arms in the E8X/E9X vehicles are made of welded sheet metal and aren't very strong, usually flexing under aggressive driving and heavy torque, leading to low stability and inconsistent handling. These control arms from SPL are much stronger and feature solid rod ends, offering outstanding stability and no suspension slop normally scene from OE rubber bushings.

    Technical specifications:

    • Black Anodized and Gundrilled 2024 Aluminum Links
    • 6061 Aluminum Clamps
    • Titanium Socket Head Cap Screws
    • Tapered Stainless Steel Knuckle Mount Spacers
    • Teflon lined FK Rod Ends
    • Made in the USA!

    Fits the following BMWs:
    2006-2013 E9X BMW RWD Submodels
    2008-2013 E8X BMW All Submodels

    SPL Parts
    Part #: SPLRGLE9X
    Price: $332.00 (USD) 
    Direct Ship
    Quantity:   
     Turner Motorsport Front Control Arm Bearing Upgrade - Pre-Installed - E9x 325i, 328i, 330i, 335i/is RWD

    BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

    For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, E83, and F8x M2/M3/M4 owners similar levels of handling precision and control for the track and street. 

    The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

    In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

    World-class features:

    • Corrosion resistant 304 Stainless steel shell.
    • Corrosion resistant 304 Stainless steel bolt sleeves.
    • Corrosion resistant 304 Stainless steel snap rings.
    • Sealed spherical ball joint for long service life.  
    • OE fitment.
    • Does not require vehicle to be at ride height to be torqued to spec.

     

    Performance Benefits:

    • Very streetable, quieter than poly with minimal NVH.
    • Improved steering feel and cornering response
    • Reduced friction over OE rubber bushing with no unwanted deflection under cornering and braking forces.
    • Does not require vehicle to be at ride height to be torqued to spec.

     

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 328i 330i 335i - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible

    Turner Motorsport
    Part #: 013277TMS03
    Price: $329.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Front Upper Control Arm - Left - E82 1M, E9X M3 This left/driver's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

    This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2006-2012 E91 BMW 325xi 328i - Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    H&R
    Part #: 31102283575
    Price: $93.95 (USD) 
    Ships on Sep 27, 2018
    Free Shipping Free Shipping
    on orders $99 and up
    SPL Parts Titanium Series Adjustable Front Lower Street Control Arms - E8X E9X RWD

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    These SPL front lower control arms open up a wide range of adjustment for roll center, camber, and track width adjustment and allow for full articulation with the correct ball joint angle. Instead of using traditional jam nuts, the main arm is slotted to allow the use of pinch bolts and SPL rotating clamps on their exclusive adjuster, making it easier to lock in track width and camber specifications.

    *includes headlight adjusting rod

    SPL Parts Billet Lower Control/Trailing Arms Feature:

    • Lightweight Aluminum and Titanium construction
    • Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment
    • Correct ball joint angle for full articulation
    • Rotating Clamp design allows for easy access to lock down alignment settings
    • Low friction 3 piece Teflon lined FK sphericals and Heim joints/rod ends
    • Multiple size Stainless Steel roll center spacers for precise adjustment

    Fits the following BMWs:
    2006-2013 E9X BMW RWD Submodels
    2008-2013 E82/88 BMW All  Submodels

    SPL Parts
    Part #: SPLFLCAE9X
    Price: $499.00 (USD) 
    Direct Ship
    Quantity:   
    OEM Lemforder Front Lower Control Arm - Right - E88, E82, E9X, E84 X1

    This replacement right front lower control arm (wisbone) is for the E82 and E9X chassis (non Xi or M). This is a direct replacement part manufactured using the Original Equipment Manufacturer's specs. This includes both inner sealed monoball joint and outer ball joint. The outer ball joint points up on this chassis. Price is for the right front (passenger's side).

    Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 328i 330i 335i - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible

    Lemforder
    Part #: 31126770850
    Price: $90.03 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Front Lower Control Arm - Right - E82 1M, E9X M3 This right/passenger's front lower control arm - also know as a wishbone - 31102283578 . This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2012 E92 BMW M3 Coupe
    2008-2012 E93 BMW M3 Convertible
    Packaged by Turner
    Part #: 31102283578X
    Price: $89.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Rogue Engineering Toe Arm Upgrade - E9X M3 & E82 1 M Coupe

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    • 100% machined and anodized, 6061-T6 lightweight aluminum arms
    • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
    • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
    • Rod ends feature grease fittings, to allow for rod end serviceability.
    • Lighter than stock!  (Stock is 875g, RE arms are 640g)
    • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
    Rogue Engineering
    Part #: RE.E9X.TA.M3
    Price: $289.00 (USD) 
    Ships in 6 days
    Quantity:   
    Rear Trailing Arm - Left and Right - E82, E9X Replacement stock lower trailing arm for the E82 1-series and E9X 3-series. The trailing arm is also an impact arm, and is designed to bend if the wheel takes a major impact. It can also be bent by tow truck operators looking for something to hook onto. However it happens, if the trailing arm is bent it will throw off the alignment for the rear suspension. There are rubber bushings at either end that also wear but these can be replaced separately (new arm does not include new bushings). This is the stock replacement that fits either the Left or Ride side of the vehicle. 

    This item fits the following BMWs:
    2008-2012  E82 BMW  128i 135i 1M Coupe
    2006-2011  E90 BMW  325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012  E91 BMW  325xi 328i 328xi 328i xDrive - Wagon
    2007-2013  E92 BMW  328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013  E93 BMW  328i 335i M3 - Convertible
    Genuine BMW
    Part #: 33322406291
    Price: $42.98 (USD) 
    $49.00 (12% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook