Bremmen Parts for BMW 3 Series E92 (2007-2013)

This Coolant Hose is located behind the thermostat on N54-equipped BMW models. Due to weak rubber construction and its close proximity to the bank one turbocharger, this hose is a common failure item on high-mileage vehicles.

Whether you are replacing a failed hose or preemptively servicing your cooling system, choose this high-quality replacement from Bremmen Parts for a lasting repair.

Replacement pad wear sensor, typically replaced when changing brake pads. If your brake lining warning is activated, the sensor will need to be replaced. Only one sensor required for front.

​This item fits the following BMWs: 
E82 BMW  128i (with M Performance front brakes and a production date from 03/2007), 135i (with M Performance front brakes and a production date from 03/2007 or standard front brakes and a production date up to 03/2010)
E90 BMW  325i (with M Performance front brakes and a production date from 06/2006), 328i (with M Performance front brakes and a production date from 03/2007 or standard front brakes and a production date up to 03/2010), 330i (with M Performance front brakes and a production date from 06/2006), 335d/335i (with standard front brakes and a production date up to 03/2010)
E91 BMW  328i (with M Performance front brakes and a production date from 03/2007 or standard front brakes and a production date up to 03/2010)
E92 BMW  328i (with M Performance front brakes and a production date from 03/2007), 335i (with standard front brakes and a production date up to 03/2010)
E93 BMW  328i (with M Performance front brakes and a production date from 03/2007 or standard front brakes and a production date up to 03/2010), 335i (with standard front brakes and a production date up to 03/2010)

Protect your suspension system and shock absorbers with this premium OE replacement bump stop from Bremmen Parts. Designed to prevent bottoming out, this essential rubber component safeguards your shocks from damage that could lead to costly repairs.

Over time, the original rubber construction can become damaged or go missing, compromising suspension performance. Replace your worn or missing bump stop to maintain optimal suspension operation and prevent unnecessary wear.

Note: One bump stop is required per shock absorber. For best results, replacement in pairs is recommended.

Essential for multiple points in the rear suspension, this hardware should be replaced to guarantee a durable and reliable repair. Don’t overlook the importance of fresh components for optimal performance!

M12X1,5X74-10.9

Replace your worn interior door pull cover with this high-quality, direct-fit piece from Bremmen Parts. Over the years, your interior trim wears with use. This wear contributes to an overall reduction in interior quality and aesthetics.

While Genuine replacements can prove expensive, Bremmen offers the same quality for a fraction of the price. Restore interior feeling and appearance with this replacement interior door pull cover from Bremmen Parts!

The cowl trim panel at the base of the windshield is a known wear item on BMWs. Years of exposure to heat, UV rays, and the elements cause the original plastic to dry out, become brittle, and eventually crack or warp—detracting from an otherwise clean engine bay and windshield area.

This high-quality aftermarket replacement from Bremmen Parts is designed to restore a factory-fresh appearance on E92 and E93 models. Featuring a precise, OEM-style fit along the windshield and firewall, it properly seals the cowl area while instantly improving the overall look of the vehicle. It’s an ideal replacement when addressing cosmetic aging, damaged trim, or during routine maintenance or windshield service.

Is your BMW making a chirping or grinding noise at idle? The culprit is frequently a failing alternator decoupler pulley. Unlike a traditional solid pulley, this Overrunning Alternator Pulley (OAP) allows the alternator rotor to "freewheel" when engine speeds drop suddenly. This specialized function protects your BMW drive belt and belt tensioner from excessive snap-back, vibration, and "belt slap."

Prevent Catastrophic Engine Failure

Over time, the internal clutch mechanism can seize or slip, leading to accelerated wear or total serpentine belt failure. On BMW engines, a snapped belt can be ingested through the front main seal, causing catastrophic engine damage. Replacing this pulley is a cost-effective preventative maintenance step that restores smoothness to your accessory drive without the high cost of a complete alternator replacement.

Features & Benefits:

Lowers the load on the drive belt, tensioner, and AC compressor.
Stops "belt slap" and rhythmic chirping noises during deceleration and idle.
Direct Replacement with high-quality construction ensures perfect fitment and long-term durability.
Essential Maintenance for N52 engines