Packaged by Turner for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Automatic Transmission Service Kit - Level 2 - BMW GA6HP19Z Transmiss...
For vehicles equipped with automatic transmission GA6HP19Z *** Check Transmission Type Prior To Orde
Packaged by Turner - Corporate Logo
T#:5376301
Part#: 24117571217TMSKT
In Stock
Sale - Save 15% $ 163.99
$ 138.96 USD
Free Shipping
Sale - Save 15% $ 163.99
$ 138.96 USD
Free Shipping
Includes all the necessary components for a complete transmission service with Liqui Moly fluid Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission oil pan with integrated filter Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 quarts Liqui Moly automatic transmission fluid
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555445
Part#: LMOCK19KT
In Stock
$ 136.99 USD
Free Shipping
$ 136.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

  • 9 Liters of  Race Tech GT1 10w-60 Engine Oil
  • Mann Oil Filter Kit
  • Genuine BMW Oil Drain Plug & Gasket

Synthoil Race Tech GT1 is a modern hig performance engine oil formulated for engines that are experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exception lubrication and engine wear protection. This design and composition makes it a great choice to used for racing and other demanding needs. Great for both gasoline and diesel engines.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555432
Part#: LMOCK5KT
In Stock
Sale - Save 4% $ 84.99
$ 81.99 USD
Free Shipping
Sale - Save 4% $ 84.99
$ 81.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Liqui Moly Special Tec LL Engine Oil 5w-30
  • Hengst Engine Oil Filter
  • Oil Drain Plug & Gasket

Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

Approved for:

  • BMW Longlife-01
  • VW 502 00
  • VW 505 00
  • MB-Freigabe 229.5

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5376276
Part#: 11427953129TKT
In Stock
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping
This new generation oil is made with a quality synthetic base and includes a molecular friction modifier for reduced friction and wear. It also glows under UV light so leaks can be easily traced! This unique oil contains a fluorescent green chemical friction modifier to smooth out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown a reduction in friction coefficient of as much as 15%! MolyGen oil is also a great choice for modern turbocharged engines which produce much more heat. This kit from Turner Motorsport contains all that you will need to do your regular service on your vehicle. The kit contains: Seven Quarts of Liqui Moly MolyGen Engine Oil Oil Filter Kit New Drain Plug with Crush Washer Make your next service a quality one with this new kit from Turner Motorsport
Show More Show Less

Packaged by Turner - Corporate Logo
T#:599759
Part#: 11377603979KT2
In Stock
Sale - Save 20% $ 275.99
$ 220.78 USD
Free Shipping
Sale - Save 20% $ 275.99
$ 220.78 USD
Free Shipping
Includes actuator, actuator gasket and valve cover gaskets
Packaged by Turner - Corporate Logo
T#:339948
Part#: TMS12059
In Stock
Starting at $ 363.10 USD
Free Shipping
Starting at $ 363.10 USD
Free Shipping

The front upper and lower control arms from the E9X M3 are a direct bolt-in replacement upgrade for the stock parts on the non-M E90/E91/E92/E93 3-series and E82/E88 1-series. With the M3 components the fluid-filled bushings of the standard suspension are replaced with solid rubber cores or a sealed monoball-joint, making the suspension stiffer, more responsive, and longer lasting.

This package includes:

  • M3 front upper control arms (thrust arm, tension strut) (31102283575 and 31102283576)
    The upper control arms eliminate the fluid-filled stock bushing which is very prone to leaking the fluid and cease being effective. The solid rubber M3 bushing is also a bit stiffer for more precise steering and control.
  • M3 front upper inner bushings (31102283579)
  • M3 front lower control arms (wishbone) (31102283577 and 31102283578)
    The M3 lower control arm has a sealed inner bearing instead of the rubber-isolated stock bushing. The bearing allows the lower arm to rotate freely instead of binding up. It's also a bit longer and curved slightly to give more negative camber (adds .75 of negative camber).

Optional: M3 headlight adjusting rod (37142283867). This rod corrects the headlights for your ride height. The original non-M leveling rod will not work on the new M3 control arm. This rod is required on all cars with Xenon headlights but not needed for standard halogen lights.

With the added negative camber the steering is sharper and understeer is reduced. And the stiffer bushings and bearings deflect less which also improves steering feel and response. Since all of these parts are from the M3 there is no question on quality or longevity; no doubt as to their effectiveness or reputation. There's almost no downside to this upgrade. These are intended for street cars but even lightly tracked cars will see significant benefits to the handling and response.

We offer this package with the OEM TRW brand components or with Original BMW branded parts (stamped with TRW logo).

This M3 upgrade package fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3- Convertible

2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555453
Part#: LMOCK28KT
In Stock
Sale - Save 3% $ 94.99
$ 92.06 USD
Free Shipping
Sale - Save 3% $ 94.99
$ 92.06 USD
Free Shipping
Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. Includes: 7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil Liqui Moly UV Flashlight Hengst Oil Filter Kit Febi Oil Drain Plug & Washer Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks! The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%! MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!) Smooth engine running characteristics Long engine service life due to exceptional protection against wear Rapid oil delivery at low temperatures Optimum oil pressure at all engine speeds Premium lubrication reliability at high and low temperatures High shear and ageing stability Reduces fuel consumption and pollutant emissions Outstanding engine cleanliness Tested with catalytic converters and performance proven with turbochargers Miscible and compatible with commercially-available engine oils Approved for the following specifications: ACEA C3 API SN / CF VAG 502.00 / 505.00 BMW Longlife-01 Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:11953
Part#: E9X-REAR-MOUNTS
Ships Jul 1, 2025
$ 80.76 USD
Free Shipping
$ 80.76 USD
Free Shipping
A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less

Packaged by Turner - Corporate Logo
T#:637846
Part#: 1142753729312KT1
Ships in 2 Business Days
Sale - Save 4% $ 79.99
$ 76.71 USD
Free Shipping
Sale - Save 4% $ 79.99
$ 76.71 USD
Free Shipping
Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less

Oil Pan Gasket - With Bolts
Bolts Are For Vehicles With Automatic Transmission ONLY
Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
$ 65.99 USD
Free Shipping
$ 65.99 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
Packaged by Turner - Corporate Logo
T#:5376273
Part#: N55OCIKT
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping
To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. Includes seven quarts of BMW synthetic engine oil, Hengst oil filter This kit contains Seven Liters of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5403248
Part#: 11427537293TMSKT
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:5376299
Part#: 11517632426TMSKT
Ships on Sep 2, 2025
Sale - Save 31% $ 809.99
$ 561.83 USD
Free Shipping
Sale - Save 31% $ 809.99
$ 561.83 USD
Free Shipping
Add strength to your cooling system and replace your water pump The secret of any reliable performance car is a rock-solid cooling system. Unfortunately, the N54's stock cooling system has several shortcomings that get in the way of reliable, repeatable, dependable performance. Turner Motorsport has spent years behind the wheel of modified N54-powered BMWs, and we've figured out what it takes to keep your N54 cool and happy. Using a combination of in-house designed parts and carefully-selected aftermarket components, we've put together an all-inclusive package that will allow you to replace your water pump and beef up your cooling system at the same time. Here's what's included: New water pump with replacement screws New thermostat Billet thermostat hose adapter (a great replacement for the stock, crack-prone plastic part!) Silicone coolant outlet hose Aluminized silicone water pump hose (aluminized for heat resistance to stay cool!) Heavy Duty aluminum coolant bleed screw (replace the strip-prone plastic screw!) New hose clamps 1 gallon of Genuine BMW coolant (just add distilled water at your desired ratio) Red Line Water Wetter (trust us, this stuff works - we've been running it for years!)Add strength to your cooling system and replace your water pump The secret of any reliable performance car is a rock-solid cooling system. Unfortunately, the N54's stock cooling system has several shortcomings that get in the way of reliable, repeatable, dependable performance. Turner Motorsport has spent years behind the wheel of modified N54-powered BMWs, and we've figured out what it takes to keep your N54 cool and happy. Using a combination of in-house designed parts and carefully-selected aftermarket components, we've put together an all-inclusive package that will allow you to replace your water pump and beef up your cooling system at the same time. Here's what's included: New water pump with replacement screws New thermostat Billet thermostat hose adapter (a great replacement for the stock, crack-prone plastic part!) Silicone coolant outlet hose Aluminized silicone water pump hose (aluminized for heat resistance to stay cool!) Heavy Duty aluminum coolant bleed screw (replace the strip-prone plastic screw!) New hose clamps 1 gallon of Genuine BMW coolant (just add distilled water at your desired ratio) Red Line Water Wetter (trust us, this stuff works - we've been running it for years!)
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555792
Part#: E9XM3TWSKT
In Stock at Vendor
Sale - Save 5% $ 202.99
$ 192.39 USD
Free Shipping
Sale - Save 5% $ 202.99
$ 192.39 USD
Free Shipping
When changing your oil, you want to make sure you are using the best. Turner Motorsport now offers our premium Castrol TWS Oil service kits to ensure you are getting the best products available for your routine oil services. Everything included has been specifically picked to ensure high quality and outstanding wear protection.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5389736
Part#: 07119904550TMSKT
In Stock
Sale - Save 4% $ 200.99
$ 192.17 USD
Free Shipping
Sale - Save 4% $ 200.99
$ 192.17 USD
Free Shipping
Everything needed for a complete oil service including TWS Edge Supercar oil and an OEM Mahle filter To keep your Ultimate Driving Machine performing flawlessly, BMW recommends following the condition based service indicator, meaning performing oil changes when the car says it needs it. For extra peace of mind, it doesn't hurt to increase your service intervals to a more commonly accepted duration, such as every 5,000-10,000 miles. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. ECS Tuning is here to help you keep your car in great condition. Note: There are two drain plugs included in this kit because removal of both drain plugs is recommended to remove all old oil Want to create your own kit? Turner Motorsport has everything you need on the website. We offer a diverse selection of oils and filters. Kit includes: - Two drain plugs with washers - Oil filter and gaskets - 9x 1 liter Castrol Edge TWS Engine Oil 10w-60
Show More Show Less

Packaged by Turner - Corporate Logo
T#:6091465
Part#: 11515A05704APKT
In Stock
$ 607.99 USD
Free Shipping
$ 607.99 USD
Free Shipping
If your water pump is starting to fail, you may notice coolant leaks, or even hear a whining noise coming from under the hood. If you think your water pump is starting to fail, replace it as soon as you can. The main downside to an electric water pump is you may also notice nothing - nothing but overheating! Keep your eyes peeled for warning signs it may be time to replace your water pump. N54 and N55 engines are prone to water pump failure - replace every 60,000 miles. Comes with electric water pump and installation hardware. Aluminum mounting bolts are one time use. Replace every time the water pump is removed.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555448
Part#: LMOCK22
In Stock
Sale - Save 3% $ 99.99
$ 96.93 USD
Free Shipping
Sale - Save 3% $ 99.99
$ 96.93 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

7 Liters of Liqui Moly 0w-40 Voll-Synthese Energy Oil
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

Meets the following requirements;

  • ACEA A3-98/B3-98
  • API SJ-CF
  • BMW [Longlife] LL-98
  • Daimler (MB 229.1)
  • VW 502.00 - 505.00

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:402692
Part#: N54LMOCP1
In Stock
Sale - Save 3% $ 133.99
Starting at $ 129.41 USD
Free Shipping
Sale - Save 3% $ 133.99
Starting at $ 129.41 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

  • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
  • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
  • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
  • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

  • Turner Motorsport Magnetic Fender Cover
  • Schwaben 6.5L Fluid Extractor
  • Schwaben 14mm/17mm Service Wrench
  • Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

2006-2012 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2005-2009 E60/E61 525i 525xi 528i 528xi 530i 530xi 535i
2005-2008 E85/E86 Z4 2.5i Z4 3.0si
2010-2016 F10 520i 520Li 523i 525Li 528i
2009–2017 F10/F11/F07 535i
2009-2016 E89 Z4 sDrive18i Z4 sDrive20i Z4 sDrive23i 2008-2011 Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2005-2010 E83 X3 2.5si xDrive25i X3 3.0si 
2007-2013 E82/E88 125i 128i 135i 135is
2011 E82 1 Series M Coupe
2009-2011 E84 X1 X1 xDrive/sDrive20i xDrive25i X1 xDrive28i X1 xDrive/sDrive28i xDrive35i
2004-2010 E63/E64 630i
2006-2012 E87 130i
2010+ F25 X3 sDrive18i X3 xDrive20i X3 28i X3 xDrive28i X3 xDrive35i
2006-2013 E70 X5 3.0si xDrive30i X5 xDrive 35i
2008–2014 E71 X6 xDrive35i
2008–2015 F01 740i 740i/Li
2011–2015 F30/F31 335i
2011–2016 F30 320i 328i
2013–2016 F32/F33/F36 435i
2014+ F15 X5 xdrive 35i
2014+ F16 X6 xDrive35i
2014+ F26 X4 xDrive 35i X4 M40i
2011+ F06/F12/F13 640i
2012–2016 F20/F21 M135i
2012–2017 F20 125i
2013–2016 F22/F23 M235i
2014+ F22 220i 225i 228i
2016+ F87 M2
2013–2016 F34 320i GT
2013–2016 F34 328i GT
2014–2017 F26 X4 xDrive20i

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555449
Part#: LMOCK23KT
Ships on Aug 8, 2025
Sale - Save 5% $ 119.99
$ 113.93 USD
Free Shipping
Sale - Save 5% $ 119.99
$ 113.93 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
ECS Tuning Magnetic Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5403237
Part#: 11247838088TMSKT
Ships in 5 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Includes everything needed for a rod bearing service, featuring BE Bearings upgraded rod bearings. The S65 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. BE Bearings, in conjunction with Clevite, an OE bearing manufacturer, have redesigned and manufactured the bearings for greater clearance and have changed the original material composition from tin-aluminum to lead-copper. This upgrade incorporated the state-of-the-art Clevite Tri-Metal design and featured a Tri-Armor™ coating. This allows for the additional lubrication for wear prevention, plus, the softer bearings are better for your engine and are more tolerant of foreign particles suspended in your oil. Another benefit from this is that the oil can now be sent for testing to accurately gauge the amount of wear occurring in the engine. Kit includes Upper and lower BE Bearings upgraded rod bearings Hardware Oil filter Castrol TWS Edge Professional 10W 60 Oil pan gasket RedLine assembly lube
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555429
Part#: LMOCK4KT
In Stock
Sale - Save 3% $ 88.99
$ 86.26 USD
Free Shipping
Sale - Save 3% $ 88.99
$ 86.26 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Longtime High Tech Engine Oil 5w-30
  • Hengst Engine Oil Filter
  • Oil Drain Plug & Gasket

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:554448
Part#: N54ACCKT
In Stock
$ 164.99 USD
Free Shipping
$ 164.99 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555718
Part#: PBTSRKT22
In Stock
Sale - Save 25% $ 314.99
$ 235.67 USD
Free Shipping
Sale - Save 25% $ 314.99
$ 235.67 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:553668
Part#: 31306775098KT2
Ships on Aug 4, 2025
Sale - Save 3% $ 301.99
$ 292.78 USD
Free Shipping
Sale - Save 3% $ 301.99
$ 292.78 USD
Free Shipping

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

E82/88 128i 135i

E90/92/93 325i 328i 330i 335i 335is 

 

Show More Show Less


Packaged by Turner - Corporate Logo
T#:583536
Part#: N52PISKT
In Stock
Sale - Save 20% $ 262.99
$ 210.05 USD
Free Shipping
Sale - Save 20% $ 262.99
$ 210.05 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Packaged by Turner - Corporate Logo
T#:558208
Part#: E9XM3RPRPKT
In Stock
$ 1,429.99 USD
Free Shipping
$ 1,429.99 USD
Free Shipping

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

  • Pagid Front & Rear Brake Pads
  • Zimmerman Front & Rear Rotors
  • New Front & Rear Wear Sensors
  • Brand New Stainless Steel Set Screws
  • Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006-2013 E9X BMW M3
2011-2012 E82 BMW 1M

Show More Show Less
Packaged by Turner - Corporate Logo
T#:554059
Part#: 11517838201KT4
Ships on Aug 11, 2025
Sale - Save 5% $ 285.99
$ 270.50 USD
Free Shipping
Sale - Save 5% $ 285.99
$ 270.50 USD
Free Shipping
The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:583535
Part#: N54PISKT1
In Stock
$ 289.99 USD
Free Shipping
$ 289.99 USD
Free Shipping
Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 BOSCH Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet
Show More Show Less

Packaged by Turner - Corporate Logo
T#:578658
Part#: 65816905133-1KT
In Stock
Sale - Save 31% $ 90.42
$ 62.08 USD
Free Shipping
Sale - Save 31% $ 90.42
$ 62.08 USD
Free Shipping
Onboard computer not reading accurate ambient temperatures anymore? This kit includes everything you need to restore external temp monitoring to your BMW.
Packaged by Turner - Corporate Logo
T#:340364
Part#: TMS206099
In Stock
Sale - Save 17% $ 450.99
Starting at $ 372.40 USD
Free Shipping
Sale - Save 17% $ 450.99
Starting at $ 372.40 USD
Free Shipping
This packages covers the major components you would install along with a new water pump or thermostat. On the N51/N52 cars (128i, 325i 328i, 330i, 525i, 528i, 530i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:
  • OEM electric water pump, p/n 11517586925.
  • aluminum mounting screws for water pump (set of 3), p/n 11510392553
  • OEM Behr thermostat, p/n 11537549476
  • Original BMW connecting hose from thermostat to water pump, p/n 11537521049
  • OEM-style hose clamps for hose (x 2)
    BUY AS A PACKAGE AND SAVE $$!

    The water pump on the N52 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

    How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

    This water pump package fits the following BMWs with the N51/N52 engine:
    2008-2013 E82 BMW 128i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
    2006-2010 E83 BMW X3 3.0i X3 3.0si
    2006-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
    2009+ Z4 BMW Z4 sDrive30i
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:401680
    Part#: 83220440214KT3
    In Stock
    Sale - Save 3% $ 350.99
    $ 340.10 USD
    Free Shipping
    Sale - Save 3% $ 350.99
    $ 340.10 USD
    Free Shipping

    The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that last a lifetime.

    This DCT service kit that takes the guesswork out of a fluid change . No need to track down the correct fluid and plugs, simply open the box, and get the job done the correct way. By servicing your DCT transmission, you will be assured that old, broken down fluid won't cause a several thousand dollar nightmare. We recommend this service every 40,000 miles to keep your transmission going strong for years to come.

    Kit includes:

    • 5 quarts of Pentosin DCTF-1 fluid
    • DCT transmission cartridge and suction filters
    • Drain and fill plugs

    Please note: We include 5 quarts of DCT fluid because without a GT1 diagnostic tool and much more involved labor, you will not be able to replace over 5 quarts of fluid. Many elect to do this service and simply flush the fluid 5,000 miles later to ensure all fluid has been flushed, but this is not mandatory.

    Both the cartridge and suction filters have their own challenges in replacing. For best results, replace both.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:567679
    Part#: 11287582946KT4
    In Stock
    $ 183.99 USD
    Free Shipping
    $ 183.99 USD
    Free Shipping
    Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:5376317
    Part#: 11427837997TMSKT
    In Stock
    $ 136.99 USD
    Free Shipping
    $ 136.99 USD
    Free Shipping

    Ensure your Ultimate Driving Machine remains at its peak with Turner Motorsport's recommended maintenance schedule. To maintain optimal performance, it's advised to undergo oil changes every 5,000-10,000 miles, tailored to your driving habits. Proper inspections performed regularly will extend your vehicle's longevity and ensure cleaner operation. Turner Motorsport stands ready to assist in preserving your car's excellent condition.

    Product Highlight:

    • Lubro-Moly Synthoil Race Tech GT1 10W-60
    • Fully synthetic, high-performance engine oil
    • Ideal for four-stroke engines under extreme load
    • Formulated with a blend of synthetic base oils and advanced additives
    • Meets requirements of the latest engine designs
    • Optimizes engine performance and immediate lubrication during cold starts
    • Provides superior wear protection for extended engine life
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:5376274
    Part#: 11517586925TKT
    In Stock
    Sale - Save 35% $ 471.99
    $ 306.31 USD
    Free Shipping
    Sale - Save 35% $ 471.99
    $ 306.31 USD
    Free Shipping
    Everything you need to replace your water pump and thermostat. The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road. Kit includes: Mahle-Behr thermostat Water pump Genuine BMW coolant thermostat to water pump hose Mounting hardware required for both the thermostat and water pump
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:558198
    Part#: E9X335RPRPKT
    In Stock
    Sale - Save 11% $ 684.76
    $ 611.57 USD
    Free Shipping
    Sale - Save 11% $ 684.76
    $ 611.57 USD
    Free Shipping

    When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

    Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

    Brake components in this kit:

    • Akebono Euro Front & Rear Brake Pads
    • Zimmerman Front & Rear Rotors
    • New Front & Rear Wear Sensors
    • Brand New Stainless Steel Set Screws
    • Syl-Glide Silicone Brake Lubricant 

    Fits the following BMWs:
    2006+ E9X BMW 335i/is/xi/d
    2012-2015 E84 BMW X1 xDrive35i

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554084
    Part#: 11537836155KT2
    In Stock
    $ 96.99 USD
    Free Shipping
    $ 96.99 USD
    Free Shipping
    When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.


    Packaged by Turner - Corporate Logo
    T#:5498488
    Part#: 33506767010KT
    Ships Jul 1, 2025
    $ 121.99 USD
    Free Shipping
    $ 121.99 USD
    Free Shipping
    Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:5389743
    Part#: 37142283867TMSKT
    In Stock at Vendor
    Sale - Save 1% $ 1,237.99
    $ 1,230.50 USD
    Free Shipping
    Sale - Save 1% $ 1,237.99
    $ 1,230.50 USD
    Free Shipping
    Featuring TRW M3 control arms plus Performance Rear Trailing arms Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy. Not sure about ECS Tuning's Upgraded Trailing arm? Let us explain... Factory steel rear trailing arms flex, causing undesired suspension geometry changes under load. BMW engineered a failure point into this stock arm - metal fatigue combined with shock forces from a pothole or curb, have been shown in some cases to cause the arm to buckle, turning a pleasant drive into a visit by roadside assistance. ECS Tuning's Performance Rear Trailing Arm Set is an upgrade that has been engineered to address these issues, while also being lighter and more attractive than the factory steel component. Elimination of a factory-designed failure point and an all-around stiffer design mean greater peace of mind as well as more confident handling with no unintended geometry changes. Combined with new M3/1M front and rear control arms for the ideal suspension set-up for your car. Kit Features: TRW M3/1M Front Control Arms TRW M3/1M Rear Control Arms ECS Upgraded Rear Trailing Arm BMW Headlight Leveling Sensor Rod BMW Rear ABS Bracket TRW Rear Guide Rods Trailing Arm features: Constructed from solid 6061-T6 aluminum Anodized for corrosion resistance Increased strength versus the factory steel arm - this arm fears no pot holes 25% lighter (384 grams versus 517 grams each)
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554529
    Part#: N5XATSKT
    In Stock
    Sale - Save 10% $ 215.99
    $ 194.19 USD
    Free Shipping
    Sale - Save 10% $ 215.99
    $ 194.19 USD
    Free Shipping

    Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. 

    Kit Includes:

    • Automatic transmission oil pan with integrated filter 
    • Oil pan gasket
    • Drain plug with sealing washer
    • Fill plug with sealing washer
    • 7 quarts Redline D4 automatic transmission fluid

    Fits the following BMWs:
    E84 BMW
    X1 xDrive35i
    E90 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission), 330i/xi, 335i/xi
    E91 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission)
    E92 BMW 328i/xi (with GA6HP19Z automatic transmission), 335i/x
    E93 BMW 328i (with GA6HP19Z automatic transmission),  335i
    E60 BMW 525i/xi, 528i/xi, 530i/xi, 535i/xi
    E61 BMW 525i, 530xi, 535xi
    E70 BMW X5 xDrive30i
    E71 BMW X6 35iX
    E82/88 BMW 128i(with GA6HP19Z automatic transmission), 135i (N54)
    F01/02 BMW 740i/Li
    E85/86/89 BMW Z4 3.0i/Si sDrive30i M54 N52

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:584100
    Part#: 23117531356DSKT
    In Stock
    Sale - Save 5% $ 107.88
    $ 102.49 USD
    Free Shipping
    Sale - Save 5% $ 107.88
    $ 102.49 USD
    Free Shipping
    The oil in your manual transmission is extremely vital to the life of your transmission. Over time it will begin to break down, lose viscosity, and begin to allow excess heat and friction. This kit is the perfect remedy to this problem. It includes 2 quarts of Redline 75w80 transmission oil that features a fully synthetic base for better protection and wear resistance. Also, a fill and drain plug.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:5416756
    Part#: 11747626350TMSKT
    In Stock
    Sale - Save 3% $ 227.99
    $ 220.82 USD
    Free Shipping
    Sale - Save 3% $ 227.99
    $ 220.82 USD
    Free Shipping
    Kit includes both boost solenoids, vacuum hose and T fitting for a easy leak free install
    Packaged by Turner - Corporate Logo
    T#:555715
    Part#: PBTSRKT19
    In Stock
    Sale - Save 25% $ 322.99
    $ 241.93 USD
    Free Shipping
    Sale - Save 25% $ 322.99
    $ 241.93 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

    This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

    See the included components under Kit Contents below.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:337998
    Part#: 12120037244
    In Stock
    Sale - Save 3% $ 111.99
    Starting at $ 108.08 USD
    Free Shipping
    Sale - Save 3% $ 111.99
    Starting at $ 108.08 USD
    Free Shipping
    Standard replacement Genuine BMW to replace Bosch ZGR6STE2 Spark plug for N54 engines (twin turbo charged 3.0 liter) which came in all 2007, 2008 and newer E90/E92 335i, 335xi coupe and sedan, as well E60 535i & 535xi. This spark plug is often listed as BMW part# 12120034087 (12 12 0 034 087).

    This spark plug set fits the following BMWs:

    2007+ E90/E92 3 Series twin turbo - including 335i & 335xi (sedan, coupe, & convertibles)
    2007+ E60 5 Series twin turbo - including 535i & 535xi (sedans and wagons)
    2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:6181664
    Part#: TWH9905003T
    In Stock
    Sale - Save 3% $ 138.99
    Starting at $ 134.82 USD
    Free Shipping
    Sale - Save 3% $ 138.99
    Starting at $ 134.82 USD
    Free Shipping
    7.5MM (.30 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:340426
    Part#: TMS222795
    In Stock
    $ 1,493.99
    Starting at $ 1,489.05 USD
    Free Shipping
    $ 1,493.99
    Starting at $ 1,489.05 USD
    Free Shipping
    Rod bearings should be replaced as a preventative measure before 80,000 miles. This package is the most complete rod bearing overhaul kit available and includes not just the latest BMW rod bearings and connecting rod bolts, but also everything else that should be replaced with the oil pan and front subframe off the car.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:6181662
    Part#: TWH9905005T
    In Stock
    Sale - Save 3% $ 123.99
    Starting at $ 120.27 USD
    Free Shipping
    Sale - Save 3% $ 123.99
    Starting at $ 120.27 USD
    Free Shipping
    5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:556738
    Part#: N52TISKT
    In Stock
    $ 268.99 USD
    Free Shipping
    $ 268.99 USD
    Free Shipping

    Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

    To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

    See kit contents below for a complete list of included components.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:593693
    Part#: N52ABKT
    In Stock
    $ 114.99 USD
    Free Shipping
    $ 114.99 USD
    Free Shipping
    Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:401683
    Part#: 65816905133KT2
    In Stock
    Sale - Save 31% $ 90.42
    $ 62.08 USD
    Free Shipping
    Sale - Save 31% $ 90.42
    $ 62.08 USD
    Free Shipping

    The external temperature sensor on a BMW is placed within the underbody plastics that extend very close to the road. As a result it's easy to damage by rolling into a low curb or parking lot tire stop. The first sign you may have a problem with your external temperature sensor is if you have a really low reading. This is caused by the sensor either being damaged, missing or having an open circuit; the wires leading to the sensor may have torn off in an impact.

     

    Includes solder filled heat shrink connectors, contact leads with wire, plug housing, temperature sensor, 10 pack of zip ties, and a panel mount zip tie for mounting the sensor.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:180875
    Part#: TMS180875
    In Stock at Vendor
    $ 97.54 USD
    Free Shipping
    $ 97.54 USD
    Free Shipping
    Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

    We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

    • 11127582245 - N52 valve cover gasket set
    • 11127552280 - N52 eccentric shaft sensor seal
    • 11127559699 - N52 Valvetronic gasket

    2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

    These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

    Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

    This valve cover kit fits the following BMWs:
    2008-2012 E82 BMW 128i
    2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    2007-2010 E60 BMW 528i 528xi 528i xDrive
    2011 F10 BMW 528i
    2007-2010 E83 BMW X3 3.0i X3 3.0si
    2007-2013 E70 BMW X5 3.0si
    10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
    2009+ Z4 BMW Z4 sDrive30i
    Show More Show Less