Wheel Stud Conversion Kit - Half Set: Enhance Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade the performance of your BMW with the Wheel Stud Conversion Kit - Half Set. This kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Wheel Stud Conversion Kit - Full Set: Enhance Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade the performance of your BMW with the Wheel Stud Conversion Kit - Full Set. This comprehensive kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation.

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2006-2011 E90 BMW 335d 335i 335xi - Sedan
2007-2013 E92 BMW 335i 335is 335xi - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2012-2015 E84 BMW X1 xDrive35i

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. A dipstick is integrated into the cap so you can monitor the oil level. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. Multiple brackets are available so you're not limited on where to mount it. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xi

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Revamp Your BMW's Wheel Setup with a Comprehensive Wheel Stud Conversion Kit - Full Set

• Enhances safety and reliability on the road
• Simplifies wheel changes and maintenance procedures
• Provides a secure and durable mounting solution
• Reduces the risk of stripped lug nuts or studs

Upgrade your BMW's wheel configuration effortlessly with the Wheel Stud Conversion Kit - Full Set. This comprehensive kit not only boosts safety and reliability on the road but also streamlines wheel changes and maintenance tasks. It offers a secure and durable mounting solution, ensuring that your wheels stay firmly in place at all times. Say goodbye to the hassle and risk of stripped lug nuts or studs with this all-inclusive wheel stud conversion kit.

Are you looking for that M3 look without the M3 expense? ECS has the solution for you. This M3 replica front bumper is manufactured to genuine specifications. Made from flexible ABS plastic, the fit and finish will have your car looking like a factory M3. Over the years, ECS has been striving to create quality aftermarket parts for affordable prices. These parts have been manufactured to the highest standards and were tested in our factory, to ensure their performance and fitment. Don’t spend more money than you have to on your performance parts, get quality aftermarket replacement parts for a price that you can afford. Includes the following:

M3 Bumper Cover
Lower Grille
Fog Lights and Trim
**Note: Fog lights will require sourcing and splicing in of 9006 connectors. Slight trimming or removal of the brake and oil cooler ducts will be necessary to install the E9X M3 style front bumper.**

BMW E92 LCI Carbon Fiber Mirror Covers - Pair

Upgrade your BMW E92 LCI with these premium Carbon Fiber Mirror Covers - Pair. Crafted with precision and style in mind, these mirror covers add a sleek and aggressive look to your vehicle. Made from high-quality carbon fiber material, they are lightweight yet durable, ensuring long-lasting performance. Enhance the aesthetic appeal of your BMW while also enjoying the following benefits:

• Adds a sporty and luxurious appearance to your car
• Protects your mirrors from scratches and damage
• Easy installation with no modification required
• Perfect fitment for BMW E92 LCI models

Enhance your BMW E9X M3's braking performance with the comprehensive ECS Performance Brake Kit, ideal for both street and track applications. Engineered to deliver exceptional stopping power without compromising compatibility with factory 19" wheels, this kit is a game-changer in terms of both form and function.

• Enhanced Brake Cooling: Enjoy a 50% increase in brake cooling and heat carry capacities for improved performance.
• Eye-catching Calipers: Vibrant blue Brembo 6-piston calipers adorned with ///M logos offer a stunning visual behind your wheels.
• Simple Installation: No vehicle modifications necessary, making installation as straightforward as a standard brake service.
• Factory Wheel Compatibility: Fits perfectly under factory 19" Style 219 front wheels, with fitment guidance provided for other wheel types.
• Included Components:
  • Genuine F10 M5/Brembo 6-piston calipers
  • ECS Tuning 2-piece 382x36mm rotors
  • ECS Tuning Exact-Fit brake lines and stainless steel rotor set screws
  • Pentosin Super DOT4 brake fluid
  • Hardware & pad wear sensors for the front

The rear segment of this kit includes ECS 2-piece rotors, Cool Carbon Performance brake pads, and ECS Exact-Fit brake lines, completing the comprehensive upgrade for consistent and reliable braking power.

Installation Note: Front brake kit reuse factory brake dust shields; slight bending of caliper dust shields is required.

Ensure proper torque values during installation:

• Bracket to knuckle: 110Nm
• Caliper to bracket: 115Nm

Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

With direct injected engines this problem becomes more prevalent, and the N54 in your 135i or 335i is no exception.  We're seeing a lot of N54 powered cars with drivability and performance issues due to significant carbon buildup in the intake ports and backs of intake valves.  The “factory fix” is a walnut blasting service that commonly needs performed every 30,000 to 70,000 miles.  Don't be part of this statistic!  Our shop recommends an oil catch can be installed in-line in the PCV system to help reduce the build-up of performance robbing deposits and greatly reduce the need for costly walnut blasting service and related repairs in the future.

The ECS Engineers were able to get more effective results compared to the competition by routing all blow by gasses through the high-load PCV circuit to ensure the catch can is functioning under all engine operating conditions.  The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The ECS Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation.  Having a kit designed specifically for your E8X 135i or E9X 335i makes for a clean looking setup that any skill level mechanic can install. 

The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance. Having a kit designed for the E9x 335 makes install easy and clean looking so any skill level mechanic can end up with professional results.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

*Click here for installation instructions*

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs with the N54 twin-turbo engine:
2007-2010 E9X BMW 335i 335xi
 

ECS Titanium Wheel Bolts

Elevate your vehicle's performance with ECS Titanium Wheel Bolts, designed for weight savings and exceptional quality. These bolts, CNC'd from annealed titanium alloy, are 50% lighter than steel bolts of the same size, reducing rotational mass for improved performance.

Tested to class 10.9 fastener proof load requirements, these bolts exhibit exceptional durability without any signs of fatigue or failure. Featuring specifications of 12mm diameter, 1.5mm thread pitch, 26mm length, a 17mm head, and a conical seat, they ensure precise fitting and reliable performance.

Benefits:

• 50% lighter than equivalent steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for exceptional durability
• Tested to class 10.9 fastener proof load requirements without signs of fatigue or failure
• High-quality, rust-resistant construction
• Precision fitment with specifications of 12mm diameter, 1.5mm thread pitch, 26mm length, and a 17mm head

Prior to installation, ensure thorough cleaning of hub threads to remove zinc traces from previous wheel bolts to prevent fatigue and cracking of the titanium alloy.

The factory plastic gears in BMW S65 throttle body actuators are notorious for premature wear due to mechanical stress, engine vibration, and heat cycling. Over time, this wear leads to excessive play, throttle response issues, and eventual failure. This can cause DME fault codes, limp mode, and DSC malfunctions. While replacing both throttle actuators is costly, even new OEM units will eventually suffer the same fate.

Thankfully, ECS has developed the ultimate solution for E9X M3 owners! These Upgraded Throttle Body Actuator Gears are constructed of Teflon-reinforced nylon, significantly reducing friction and gear tooth wear for long-term reliability. Each gear comes pre-installed on a 4140 steel shaft, strengthening the assembly and preventing further failure.

Servicing the internals of S65 throttle body actuators can be a challenging task due to their intricate design. To simplify the process, ECS has developed a complete plug-and-play replacement kit. This kit includes two brand-new OEM Continental/VDO throttle body actuator assemblies, rebuilt with upgraded ECS gears and shafts for simplified installation and long-term durability. Unlike rebuilt actuators, this solution minimizes the risk of internal electrical failures, providing superior protection against common failure modes.

Features & Benefits:

Upgraded Teflon-reinforced nylon gears – Superior to factory plastic-on-plastic gears, reducing wear and extending lifespan. 4140 steel shafts – Increases durability and simplifies installation. Pre-installed inside OEM Actuators – Decreases install complexity and reduces the risk of electrical failure in rebuild units. Prevents common actuator failures – Resolves worn gear issues that cause CELs, limp mode, and DSC/DME errors. Cost-effective alternative to full actuator replacement – Saves hundreds in parts and labor. Factory-like fitment – Engineered for precise compatibility and long-term reliability. Built to withstand heat and mechanical stress – Ensures consistent throttle performance and extended service life.