BMW 5 Series E34 (1987-1995)

Like what we do? We hope so. Purchase a Turner Motorsport T-Shirt today and add the Turner colors to your regular t-shirt rotation.

These shirts are premium, New-Era tees - we wouldn't want you to be uncomfortable while sporting the Turner logo.

Available in Black, Grey, and Blue. Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Vague or slopping shifter feel even after installing a short shifter or new OE shifter linkage bushings?  Looking for a more precise shifter feel in your classic BMW?  Consider replacing your old, worn rubber rear shifter bushing with new Turner poly to get the best shifting experience possible!  The Turner engineering team wasn’t satisfied with the other options on the market, so we set out to design the best solution for ease of installation and performance.

The competition requires the installer to cut or burn the rubber bushing out of the stock housing to be able to install their poly bushing, requiring reuse of an old worn out housing, or buying a new costly bushing assembly.  We decided this was cumbersome and unnecessary, so we designed a complete upgrade replacement bracket with a 70A polyurethane bushing preinstalled for a quick bolt-in installation.  Our bracket is precision formed with a CNC machined and TIG welded bushing cup to perfectly match the OEM bracket, and is made from 304 stainless steel for exceptional corrosion resistance.  The result is a complete design solution that creates much crisper shifting with nearly zero added NVH for a more engaging and enjoyable driving experience.

Note: Some shifter arms have a mushroom-shaped end. Use extra care installing our bushing on these arms. Filing this mushroom down makes installation easier, however simply applying sufficient pressure to the back side of the bushing during installation will allow this bushing to install smoothly.

This is the last bushing you will ever want or need for your E28, E30, or E34!

Product Features:

• Pre-installed bushing, NO cutting or burning for installation
• Corrosion resistant 304 stainless steel mounting bracket
• 70A durometer poly bushing for reduced NVH
• Ready to install out of the box
• Replaces Genuine BMW part number 25111220707
• Made in America

Have a newer BMW? Click here.

This fits the following BMWs:        

1987-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1987-1988 E28 BMW 528e 533i 535is M5
1987-1989 E24 BMW M6
1993-1995 E34 BMW 525i 530i 535i
1991-1993 E34 BMW M5

Whether you are looking to replace your old stock wheel lug bolts, or need longer bolts to accommodate wheel spacers or for other special considerations, our black wheel bolts are probably what you need. They are high grade (10.9) and feature a durable black finish. These are 12 x 1.5mm bolts with a 17mm head -- as used on most BMWs. Replaces BMW part numbers 36136781150 and 36131095390.

The standard length wheel bolts are for stock BMWs, and the longer length bolts are listed below (select your length with the drop down box) with the size / thickness wheel spacers they are suitable for. Longer wheel bolts are only 20 cents more than standard, and are available in lengths to work with spacers up to 20mm thick. Please select your desired length below (default is the standard/stock BMW length bolt).

Price is for a set of 10 bolts.

These black wheel bolts fit the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1977-1983 E21 BMW 320i 320/5 323i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi L6 M6
2004-2011 E63 E64 BMW 645ci 650i M6
1977-1987 E23 BMW 728i 733i 735i 745i L7
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2015 E89 BMW Z4 sDrive28i sDrive30i sDrive35i sDrive35is
2000-2003 E52 BMW Z8 Roadster
2002-6/2006 R50 MINI MINI Cooper
2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-6/2006 R53 MINI MINI Cooper S

The ZF S5D 320Z 5-speed transmission is known for its robust design, exceptional durability, and impressive power-handling capability. Unfortunately, as these transmissions age, shifter-related issues have become increasingly common. Problems such as difficulty selecting gears, a sticky shifter, or a decline in shift quality are often the result of worn detent springs, pins, and bushings. These components are essential for precise gear engagement and proper shifter centering, making their replacement a critical step in maintaining optimal performance.

Replacing detents requires specialized tools known as "drifts," which are notoriously hard to find. Fortunately, we've developed a complete Detent Tool Kit, featuring five precision-engineered drifts designed for exact fitment in the ZF transmission's detent bores. This toolset makes detent replacement straightforward and minimizes the risk of damage to internal transmission components.

Features

Complete Tool Kit: Includes five precision-machined drifts specifically designed for the ZF 5-speed transmission’s detent bores and caps. Hassle-Free Detent Replacement: Simplifies the process of removing and installing detents with professional-grade precision. Protects Your Investment: Reduces the risk of damaging internal transmission components during service. Durable Construction: Made from heavy-duty 1045 steel for exceptional strength and long-lasting reliability.

Made for the real drivers car, we are excited to offer our new Turner Shift Knobs. Our mission was to develop a shift knob that helped connect the driver to the car. There is something about having a third pedal and direct engagement with your gearbox that makes driving worth all the time and money spent on your BMW. Every once in a while a product a product comes out and you just have to think to yourself "how could it get any better than this?" There are many shift knobs out there but none like our Turner weighted shift knobs. A combination of the correct size, shape and weight paired with the durable but smooth Delrin exterior gives you the driving experience that cannot be matched by anything else on the market. Our weighted shift knob is superior for its enhanced shifting capabilities and resistance to temperature change. No more hot shift knobs in the summer and bone chilling shift knobs in the winter, the Delrin exterior provides a barrier between extreme temperature changes for a truly enjoyable experience.

Our Turner Motorsport's in-house engineered billet aluminum shift knobs have been carefully designed and tested to bring you one of the highest quality and greatest interior enhancements available. Our shift knobs start out with a piece of billet 6061-T6 aluminum that gets CNC machined for a precision fit and finish. The aluminum components are anodized with an extremely durable and long lasting type II finish. Unlike many others on the market, our Turner shift knob features a groove where the seam of the wrapping insets so there is a smooth appearance and feel. The lower "boot lock" securing nut was carefully designed to provide a clean, OEM style seal between the knob and the shift boot by allowing the boot end to tuck down inside it. Weighing in at a shift smoothing 340g, the knob will enhance the shifting experience and pairs extremely well with Turner's short shift kits to give a full shifter makeover! OEM shift knobs have an average weight of 175g; the substantially heavier weight of Turner's shift knob will smooth out shifts resulting in faster engagement and a much better feel. Up to 179% heavier than your stock knob!

Features:

Anodized billet aluminum core
Extremely durable Delrin outer construction
340g up(11.99oz)
5 Speed Coin
Anodized billet shift boot collar with Turner logo engraved
Shift knobs are available in both 5 and 6 speed variants.

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

If you've ever bled the clutch hydraulic system on your BMW, you know how frustrating it can be. Designed with both DIY enthusiasts and professional technicians in mind, our clever tool simplifies one of the most notoriously annoying steps in clutch service.

Crafted from high-quality aluminum and finished in a durable black anodized coating, our clutch slave cylinder bleeder tool is built to last. Its function is simple: the adjustable piston rod applies controlled pressure directly to the clutch slave cylinder’s piston, compressing it and reducing its internal volume. By minimizing the amount of air trapped inside the cylinder, bleeding becomes faster, cleaner, and far more effective—no more endless pedal pumping or inconsistent clutch feel. The result is firm, consistent clutch pedal engagement and a smoother overall driving experience, all achieved with less time and effort underneath the car.

FEATURES & BENEFITS

Simplifies bleeding the BMW clutch hydraulic system by reducing trapped air in the slave cylinder Eliminates excessive pedal pumping and inconsistent clutch feel Helps achieve firm, consistent clutch pedal engagement Crafted from high-quality aluminum for strength and longevity Durable black anodized finish resists wear and corrosion Designed for both DIY enthusiasts and professional technicians PRODUCT DEVELOPMENT

Our Clutch Slave Cylinder Bleeder Tool was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.
 

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"

Please select your length below. 

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look