Showing 8303 results for ""

Includes connector housing with terminals and seals. Commonly used for the pencil-style ignition coil connector.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12527519996 - Commonly used for the pencil-style ignition coil connector.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E46 M3 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E46 M3 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your E46 M3 today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Expansion Tank Cap Coolant Level Sensor Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are the best solution for completely eliminating deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality sealed OE bearing. These bushings were developed from years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These sealed spherical bearings are the best at controlling rear toe alignment.

Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. While multiple manufacturers offer two piece designs, our research showed that a one piece bushing is a better design featuring a sealed bearing to keep contaminants out extending the life of the bearing.

Features:

Key Benefits:

• Rear Trailing Arm Monoball eliminates unwanted deflection, maintaining alignment settings and minimizing wheel hop.
• Allows full rear trailing arm articulation for low friction movement and eliminates binding found in rubber and poly bushings.
• Completely streetable: utilizes an OES Lemforder brand sealed, greased ball joint for an extremely long service life with no increase to NVH.

Design Features:

• Housing: Billet CNC 6061-T6 aluminum, type II anodized for exceptional durability and corrosion resistance
• Bearing: OE Mercedes/lemforder 2043520027 Sealed ball joint
• Bearing inserts: CNC machined 303 stainless steel.
• Rebuildable

Clickhere for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Our Performance CSL Air Filters start with a multi-layer oiled cotton construction that contains millions of smaller fibers to provide superior filtration and performance over the OEM filter. Precisely manufactured for a secure fitment to ensure all the air entering your motor is properly filtered. With the CSL E46 only being offered in Europe, the OEM air filters are produced in much lower quantities making them harder to obtain and drive up the price. Turners solution is a price effective solution that offers premium filtration with increased flow, extended service interval and lifespan.

Having a clean air filter ensures your engine is running at its best efficiency! Proper air flow will help your engine breathe, get the best fuel economy and allow full power throughout the power band. Get the most out of your CSL intake with a new Oiled High Flow Air Filter. These filters can be cleaned, oiled and reused for an extended service life.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters allow better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards.
Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.
Both dry and oiled filters flow better than stock and can be reused.
Product Features:

Direct Replacement for OEM filter
Increased air flow
Lower cost
Serviceable
Readily available
How to service an oiled air filter:

Take out your High Flow Filter
Gently tap your air filter on a smooth surface
Wash with warm soapy water a a soft bristled brush
Rinse with low pressure water
Let the filter air dry
Apply new filter oil
Ready to reinstall for a fresh drive!

Our Performance CSL Air Filters start with a multi-layer synthetic dry cotton construction that contains millions of smaller fibers to provide superior filtration and performance over the OEM filter. Precisely manufactured for a secure fitment to ensure all the air entering your motor is properly filtered. With the CSL E46 only being offered in Europe, the OEM air filters are produced in much lower quantities making them harder to obtain and drive up the price. Turners solution is a price effective solution that offers premium filtration with increased flow, extended service interval and lifespan.

Having a clean air filter ensures your engine is running at its best efficiency! Proper air flow will help your engine breathe, get the best fuel economy and allow full power throughout the power band. Get the most out of your CSL intake with a new Synthetic High Flow Air Filter. These filters can be cleaned and reused for an extended service life.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters allow better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards.
Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.
Both dry and oiled filters flow better than stock and can be reused.
Product Features:

Direct Replacement for OEM filter
Increased air flow
Lower cost
Serviceable
Readily available
How to service an oiled air filter:

Take out your High Flow Filter
Gently tap your air filter on a smooth surface
Wash with warm soapy water a a soft bristled brush
Rinse with low pressure water
Let the filter air dry
Ready to reinstall for a fresh drive!

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

• Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
• Rolled Angle Design: Provides a stylish and aggressive appearance.
• Stepped Left Design: Ensures a precise fit and a distinctive look.
• 3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
• Durable Construction: Built to withstand the elements and maintain its shine.

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On older BMWs, the engine ground strap is a thin, non-insulated cable that spans from the engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for E30 (318i/is), E36, E39, E46, and others Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12421737755 and 12421714262.

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Enhance your car's performance with ECS Tuning's polyurethane transmission mounts, designed for both street and track applications. These mounts are engineered to withstand high torque and forced-induction scenarios, eliminating concerns about torn mounts and providing a more engaging driving experience. Although polyurethane may introduce some additional NVH (Noise, Vibration, Harshness), its exceptional durability, wear resistance, and resistance to water, oil, and grease make it the perfect choice for performance enthusiasts. ECS Tuning offers two durometer options to match your driving style, along with a comprehensive DIY installation guide, ensuring a complete solution for your transmission mount requirements.

Key Features:

• Minimized transmission movement, reducing the risk of mis-shifts and over-revs.
• Made from high-quality polyurethane bonded with 304 Stainless Steel.
• Enhanced driving experience for both street and track enthusiasts.
• Two durometer options available: 80A for race applications and 70A for daily driving (ES#2859359).
• Replaces weak OEM mounts.