BMW Brakes & Brake Parts for BMW E46 M3 S54 (1999-2005)

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting fittings, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:

• Better stopping power even when the pads are cold
• Good initial bite (more than on Hawk HPS)
• Excellent resistance to fade during street use
• Moderate dust during normal street driving
• Quiet operation
• Easy on rotors

Fits the following BMWs:
E32, E34, E36 M3, E46 M3, E39 528i 525i, Z3 M

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2001-2006 E46 BMW 330i/ci/xi

2004-2010 E83 BMW X3

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2001-2006 E46 BMW 330i/ci/xi

2004-2010 E83 BMW X3

2006-2008 E85 BMW Z4

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2001-2006 E46 BMW 330i/ci/ci M3

2000-2003 E39 BMW M5

2007 E60 BMW 525i

1995-2001 E38 BMW 740i/iL 750iL

2000-2003 Z8 BMW

2006-2008 E85 BMW Z4

2000-2006 E53 BMW X5

2004-2010 E83 BMW X3

BMW E46 M3 E39 M5 Rear Brake Rotors - Pair (328x20) are engineered to meet the exact specifications of the original equipment, ensuring optimal performance and reliability. These rear brake rotors are designed to provide superior stopping power and heat dissipation, making them an essential upgrade for BMW enthusiasts looking to maintain or enhance their vehicle's braking system.

• Direct fit replacement for original rotors, ensuring perfect compatibility
• Manufactured to original specifications for reliable performance
• Improved heat dissipation to reduce brake fade during aggressive driving
• Enhanced stopping power for increased safety and control
• Ideal for both daily driving and performance applications