BMW 3 Series E46 (1999-2005)

The factory rubber/plastic hoses become brittle and crack over time. Brittle and cracked hoses can cause multiple vacuum leaks that are impossible to repair without hose replacement. Vacuum leaks can cause many problems including rough running, missing, stalling at idle, and even a no-start condition.

The factory hoses offered through BMW are plastic and will yield the same results of becoming brittle and damaged over time. Our solution is a premium replacement that will outlast everyone of the OEM replacements. Our Silicone Crankcase Vent Hose can be used to replace the factory brittle hose to ensure your S54 is free from vacuum leaks and performing properly.

CSL Vent Hose (11157833649) - Silicone Crankcase Vent hose is a direct replacement

Key benefits:

Lifetime replacement of the brittle OEM plastic crankcase breather hose that is susceptible to cracking overtime from constant heat cycling

Design:

Retains OEM hose end fittings to ensure proper seal

“Black” 3 ply reinforced silicone w/ “White” Turner logo

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or rod bearing service!

Made for the real drivers car, we are excited to offer our new Turner Shift Knobs. Our mission was to develop a shift knob that helped connect the driver to the car. There is something about having a third pedal and direct engagement with your gearbox that makes driving worth all the time and money spent on your BMW. Every once in a while a product a product comes out and you just have to think to yourself "how could it get any better than this?" There are many shift knobs out there but none like our Turner weighted shift knobs. A combination of the correct size, shape and weight paired with the durable but smooth Delrin exterior gives you the driving experience that cannot be matched by anything else on the market. Our weighted shift knob is superior for its enhanced shifting capabilities and resistance to temperature change. No more hot shift knobs in the summer and bone chilling shift knobs in the winter, the Delrin exterior provides a barrier between extreme temperature changes for a truly enjoyable experience.

Our Turner Motorsport's in-house engineered billet aluminum shift knobs have been carefully designed and tested to bring you one of the highest quality and greatest interior enhancements available. Our shift knobs start out with a piece of billet 6061-T6 aluminum that gets CNC machined for a precision fit and finish. The aluminum components are anodized with an extremely durable and long lasting type II finish. Unlike many others on the market, our Turner shift knob features a groove where the seam of the wrapping insets so there is a smooth appearance and feel. The lower "boot lock" securing nut was carefully designed to provide a clean, OEM style seal between the knob and the shift boot by allowing the boot end to tuck down inside it. Weighing in at a shift smoothing 340g, the knob will enhance the shifting experience and pairs extremely well with Turner's short shift kits to give a full shifter makeover! OEM shift knobs have an average weight of 175g; the substantially heavier weight of Turner's shift knob will smooth out shifts resulting in faster engagement and a much better feel. Up to 179% heavier than your stock knob!

Features:

Anodized billet aluminum core
Extremely durable Delrin outer construction
340g(11.99oz)
6 Speed Coin
Anodized billet shift boot collar with Turner logo engraved
Shift knobs are available in both 5 and 6 speed variants.

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

High Performance air filter, replacement filter for Turner Motorsport intakes, or great for your custom intake project. 

Filter Dimension 

• 152MM length 
• 114MM base
• 60MM inlet 

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Replace the Achilles heel of your factory cooling system with a stout and reliable mechanical thermostat setup.

The factory E46 thermostat housing is a combined unit featuring a plastic housing and a built in thermostat that you cannot replace separately. These plastic all-in-one units are commonly know to crack or fail causing a headache, a trip on the tow truck and possible damage to your engine.

Taking cues from the reliable M50 thermostat setup we designed a an assembly that not only converts your plastic housing into a billet aluminum unit but also swaps out the integrated thermostat for a separate replaceable thermostat. The ability to swap out thermostats separately from the whole housing opens up doors to changing thermostats to different temperature ratings based on your application while also providing lower maintenance costs. No longer do you have to replace the whole housing but just the thermostat itself.

The billet housing is designed to be utilized with E46 M3 upper and lower radiator hoses and also features -16 ORB connections for custom radiator hoses. A major upgrade from the factory and aftermarket plastic units. Our thermostat housing kit can be used by the savvy daily driver or the track hero who wants to ensure the durability of their cooling system.

Key benefits:

Uses M50/S50 mechanical thermostat for increased reliability
Option to use aftermarket colder thermostats if desired
Thermostat can be replaced separately for lower maintenance cost
Barbed hose connections for use with E46 M3 hoses or built in -16 ORB connections for custom radiator hoses
Design:

Machined out of a single piece of billet 6061 aluminum, this thermostat housing will withstand higher prolonged temperatures and abuse for performance applications
Black anodized with engraved Turner logo on the front to match the Turner Motorsports Power Steering Reservoir
Viton gasket for superior sealing performance
For use with E46 M3 radiator hoses 11537830715 and 11537830716
Kit contents:

6061 Billet Aluminum Thermostat Housing
Mechanical Thermostat
Thermostat Housing Gasket
Thermostat Harness
Optional Silicone or Rubber E46 M3 coolant hoses
Product Development:

Our Billet Thermostat Housing upgrade was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Whether you are looking to replace your old stock wheel lug bolts, or need longer bolts to accommodate wheel spacers or for other special considerations, our silver wheel bolts are probably what you need. They are high grade (10.9) and feature a durable bright silver finish. These are 12 x 1.5mm bolts with a 17mm head -- as used on most BMWs. Replaces BMW part numbers 36136781150 and 36131095390.

The standard length wheel bolts are for stock BMWs, and the longer length bolts are listed below (select your length with the drop down box) with the size / thickness wheel spacers they are suitable for. Longer wheel bolts are only 20 cents more than standard, and are available in lengths to work with spacers up to 20mm thick. Please select your desired length below (default is the standard/stock BMW length bolt).

Price is for a set of 10 bolts.

These silver wheel bolts fit the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1977-1983 E21 BMW 320i 320/5 323i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi L6 M6
2004-2011 E63 E64 BMW 645ci 650i M6
1977-1987 E23 BMW 728i 733i 735i 745i L7
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2015 E89 BMW Z4 sDrive28i sDrive30i sDrive35i sDrive35is
2000-2003 E52 BMW Z8 Roadster
2002-6/2006 R50 MINI MINI Cooper
2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-6/2006 R53 MINI MINI Cooper S