The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2004-2005 E60 BMW 525i (automatic transmission only)
2006-2007 E60 BMW 525i, 525xi (all transmissions)
2008-2010 E60 BMW 528i, 528xi
2004-2007 E60 BMW 530i, 530xi
2008-2010 E60 BMW 535i, 535xi
2004-2010 E60 BMW 545i, 550i
2004-2010 E63 BMW 645Ci, 650Ci
2002-2008 E65 BMW 745i, 745Li, 750i, 750Li, 760Li
2007-2013 E9X BMW 335i, 335Xi, 335d
2008-2013 E9X BMW M3

The caliper sliding bolts are one of the most overlooked wear items in your braking system. Subjected to constant motion and often without adequate lubrication the guide bolts see a lot of wear and tear. Factory BMW caliper guide bolts are very expensive from the dealer - these 304 stainless steel bolts are less than half the price and provide outstanding resistance to corrosion and wear. They are manufacturered with tighter tolerances than the factory bolts too.

Price is per bolt unless noted (2 required per caliper).

Enter your vehicle info for specific fitment information.

BMW E82 E9X Front Brake Rotors - Pair (300x24) offer a high-quality, budget-friendly solution for your BMW’s braking system. Manufactured by Zimmerman, these brake rotors provide reliable, stock-like performance without compromising on durability. Over time, brake rotors can suffer from warping or rust, which can lead to uneven braking, vibration, and decreased stopping power. This pair of front brake rotors is designed to maintain your vehicle’s safety and performance, making them an excellent choice for routine maintenance or upgrades.

• Premium quality Zimmerman rotors for BMW E82 and E9X models
• Dimensions: 300x24mm, ensuring direct fitment and stock-like performance
• Resistant to warping and excessive rust for long-lasting durability
• Helps reduce vibration in the steering wheel and maintain smooth braking
• Ideal for replacing worn or damaged rotors
• Consider pairing with new brake pads for optimal braking performance

Upgrade your BMW’s braking system with the BMW E82 E9X Front Brake Rotors - Pair (300x24) from Turner Motorsport and enjoy improved reliability and performance.

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2006-2013 E9X BMW 328i/xi

2013-2015 E84 BMW X1

Enhance Your Vehicle's Braking Performance with the Power Stop Z23 Evolution Sport Brake Kit

If you're in search of a fast, easy, and cost-effective way to boost your braking system's performance and cooling, look no further than the Power Stop Z23 Evolution Sport Brake Kit. This all-inclusive kit delivers a complete solution for your braking needs, featuring perfectly matched rotors and Power Stop Evolution carbon-fiber ceramic brake pads. It also includes upgraded stainless steel hardware, new pin bushings, and high-temperature brake lubricant.

The Power Stop Evolution brake pads are engineered to produce minimal dust, enhance stopping power, reduce brake noise, and maintain optimal drivability for your everyday needs. Say goodbye to noisy stops and excessive dust while enjoying improved brake performance.

The rotors in this kit are meticulously upgraded to meet the demands of performance braking. They feature precision drilling to enhance cooling, rounded slots on the friction surface to clear gas and debris effectively, and a Silver Zinc Dichromate plating that not only adds a stylish finish but also provides rust and corrosion prevention. This plating eliminates the formation of the typical rust lip, ensuring the rotors remain robust and reliable even after extended use.

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2006-2011 E90 BMW 335d 335i 335xi - Sedan
2007-2013 E92 BMW 335i 335is 335xi - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2012-2015 E84 BMW X1 xDrive35i

BMW E84 E9X Rear Brake Rotors - Pair (336x22) are essential for maintaining optimal braking performance in your BMW. When rotors begin to wear thin or warp, drivers often experience pedal pulsation and decreased braking efficiency. These high-quality Zimmermann rotors are designed with a special "Z" coat that provides excellent rust resistance and extends their lifespan.

When replacing your rotors, it's also advisable to consider new brake pads. ECS Tuning offers a wide selection of stock replacement and performance pads to help restore or enhance braking performance. Regularly checking and replacing worn components will ensure your braking system remains in peak condition for safe driving.

• High-quality Zimmermann rotors for reliable braking performance
• "Z" coat finish for superior rust resistance and longevity
• Reduces pedal pulsation and improves braking efficiency
• Ideal for both stock replacement and performance upgrades
• Ensures safety by maintaining a well-functioning braking system

BMW E84 E9X Rear Slotted Brake Rotors - Pair (336x22): Upgrade Your BMW's Braking Performance

• Enhances brake cooling and reduces brake fade
• Improves braking response and overall stopping power
• Reduces brake pad wear for extended pad life
• Provides a stylish appearance with slotted design

Upgrade the braking performance of your BMW with the BMW E84 E9X Rear Slotted Brake Rotors. These brake rotors are specifically designed to fit BMW E84 and E9X models, providing enhanced braking performance and durability. With a slotted design, they help improve brake cooling, reduce brake fade, and enhance overall stopping power. Additionally, they reduce brake pad wear for extended pad life, saving you money on replacement pads in the long run. Plus, their stylish appearance adds a sporty touch to your BMW's exterior. Access Secret Premium Dashboard