When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Akebono Euro Rear Brake Pads
• Zimmerman Rear Rotors
• New Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006+ E9X BMW 330i/xi 335i/is/xi/d
2012-2015 E84 BMW X1 xDrive35i

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2008-2013 E82/88 BMW 135i, 128 with BMW Performance caliper conversion
2006-2009 E9X BMW Submodels with BMW Performance caliper conversion

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Upgrade your BMW's braking performance to super-stopper status with this exceptional 6-piston big brake kit. Designed to deliver optimal braking power, this kit features ECS 2 piece rotors measuring 338mm, coupled with six-piston calipers equipped with new pads. Compatible with 17-inch or larger wheels, this kit elevates your BMW's stopping capabilities to a whole new level.

Kit Benefits:

• Enhanced braking power
• Improved stopping performance
• Complete kit for easy installation
• Includes high-quality components for durability
• Compatible with 17-inch or larger wheels

Enhance Your Vehicle's Braking Performance with the Power Stop Z23 Evolution Sport Brake Kit

If you're in search of a fast, easy, and cost-effective way to boost your braking system's performance and cooling, look no further than the Power Stop Z23 Evolution Sport Brake Kit. This all-inclusive kit delivers a complete solution for your braking needs, featuring perfectly matched rotors and Power Stop Evolution carbon-fiber ceramic brake pads. It also includes upgraded stainless steel hardware, new pin bushings, and high-temperature brake lubricant.

The Power Stop Evolution brake pads are engineered to produce minimal dust, enhance stopping power, reduce brake noise, and maintain optimal drivability for your everyday needs. Say goodbye to noisy stops and excessive dust while enjoying improved brake performance.

The rotors in this kit are meticulously upgraded to meet the demands of performance braking. They feature precision drilling to enhance cooling, rounded slots on the friction surface to clear gas and debris effectively, and a Silver Zinc Dichromate plating that not only adds a stylish finish but also provides rust and corrosion prevention. This plating eliminates the formation of the typical rust lip, ensuring the rotors remain robust and reliable even after extended use.

BMW E84 E9X Rear Slotted Brake Rotors - Pair (336x22): Upgrade Your BMW's Braking Performance

• Enhances brake cooling and reduces brake fade
• Improves braking response and overall stopping power
• Reduces brake pad wear for extended pad life
• Provides a stylish appearance with slotted design

Upgrade the braking performance of your BMW with the BMW E84 E9X Rear Slotted Brake Rotors. These brake rotors are specifically designed to fit BMW E84 and E9X models, providing enhanced braking performance and durability. With a slotted design, they help improve brake cooling, reduce brake fade, and enhance overall stopping power. Additionally, they reduce brake pad wear for extended pad life, saving you money on replacement pads in the long run. Plus, their stylish appearance adds a sporty touch to your BMW's exterior.

This performance brake service kit includes ECS 2-Piece performance rotors, Hawk HPS pads, new sensors, assembly grease, and set screws to make your brake upgrade quick and easy.

Includes the following parts:

Front ECS 2-piece semi-floating cross-drilled and slotted rotors Rear ECS 2-piece semi-floating cross-drilled and slotted rotors Front and Rear ECS EP24 "Enthusiast Performance" Brake Pads Front URO and rear URO pad wear sensors ECS stainless steel rotor set screws Brake lubricant compound packets

BMW E84 E9X Rear Brake Rotors - Pair (336x22) are essential for maintaining optimal braking performance in your BMW. When rotors begin to wear thin or warp, drivers often experience pedal pulsation and decreased braking efficiency. These high-quality Zimmermann rotors are designed with a special "Z" coat that provides excellent rust resistance and extends their lifespan.

When replacing your rotors, it's also advisable to consider new brake pads. ECS Tuning offers a wide selection of stock replacement and performance pads to help restore or enhance braking performance. Regularly checking and replacing worn components will ensure your braking system remains in peak condition for safe driving.

• High-quality Zimmermann rotors for reliable braking performance
• "Z" coat finish for superior rust resistance and longevity
• Reduces pedal pulsation and improves braking efficiency
• Ideal for both stock replacement and performance upgrades
• Ensures safety by maintaining a well-functioning braking system

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

BMW E90 E92 E93 Front And Rear Brake Pad Kit - EBC RedStuff is the perfect choice for high-performance BMW models driven aggressively on the street. Designed to enhance braking performance, these brake pads feature a low-dusting compound that delivers exceptional stopping power even when the brake discs are cold. The Kevlar fiber-based compound is further enhanced with ceramic particles, ensuring improved longevity and quieter operation compared to previous EBC RedStuff formulations.

Drivers will appreciate that while these hard-wearing pads may require a bed-in period of up to 1,000 miles to fully conform to the shape of the brake rotor, the payoff is a superior braking experience. This kit is ideal for those seeking impressive performance for repeated heavy braking situations.

• Designed specifically for high-performance BMW E90, E92, and E93 models
• Low-dust formulation for cleaner wheels and reduced maintenance
• Exceptional stopping power, even at lower temperatures
• Durable Kevlar fiber-based compound enhanced with ceramic particles
• Quieter operation compared to previous brake pad formulations
• Ideal for aggressive street driving and repeated heavy braking

Upgrade your BMW's braking performance with the BMW E90 E92 E93 Front And Rear Brake Pad Kit - EBC RedStuff for a truly superior driving experience.

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Akebono Euro Rear Brake Pads
• Zimmerman Rear Rotors
• New Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006+ E9X BMW 325i 328i

• Precision-engineered to fit BMW E84 and E9X models
• Dimensions: 300x20 mm for enhanced braking power
• High-quality materials prevent rust and warping
• Easy installation for a hassle-free upgrade
• Designed to work seamlessly with OEM and performance brake pads

Benefits:

• Restores braking performance and improves safety
• Reduces vibrations for a smoother stopping experience
• Enhances durability and longevity of the braking system
• Ensures consistent braking response under various conditions
• Ideal for both daily driving and performance applications