BMW E84 E9X Rear Brake Rotors - Pair (336x22) are essential for maintaining optimal braking performance in your BMW. When rotors begin to wear thin or warp, drivers often experience pedal pulsation and decreased braking efficiency. These high-quality Zimmermann rotors are designed with a special "Z" coat that provides excellent rust resistance and extends their lifespan.

When replacing your rotors, it's also advisable to consider new brake pads. ECS Tuning offers a wide selection of stock replacement and performance pads to help restore or enhance braking performance. Regularly checking and replacing worn components will ensure your braking system remains in peak condition for safe driving.

• High-quality Zimmermann rotors for reliable braking performance
• "Z" coat finish for superior rust resistance and longevity
• Reduces pedal pulsation and improves braking efficiency
• Ideal for both stock replacement and performance upgrades
• Ensures safety by maintaining a well-functioning braking system

Enhance Your Vehicle's Braking Performance with the Power Stop Z23 Evolution Sport Brake Kit

If you're in search of a fast, easy, and cost-effective way to boost your braking system's performance and cooling, look no further than the Power Stop Z23 Evolution Sport Brake Kit. This all-inclusive kit delivers a complete solution for your braking needs, featuring perfectly matched rotors and Power Stop Evolution carbon-fiber ceramic brake pads. It also includes upgraded stainless steel hardware, new pin bushings, and high-temperature brake lubricant.

The Power Stop Evolution brake pads are engineered to produce minimal dust, enhance stopping power, reduce brake noise, and maintain optimal drivability for your everyday needs. Say goodbye to noisy stops and excessive dust while enjoying improved brake performance.

The rotors in this kit are meticulously upgraded to meet the demands of performance braking. They feature precision drilling to enhance cooling, rounded slots on the friction surface to clear gas and debris effectively, and a Silver Zinc Dichromate plating that not only adds a stylish finish but also provides rust and corrosion prevention. This plating eliminates the formation of the typical rust lip, ensuring the rotors remain robust and reliable even after extended use.

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2006-2007 E46 BMW 325i/xi 328i/xi 330i/xi

2004, 2007 E60 BMW 525i

2009-2016 Z4 BMW

These are the OEM brake pads to fit the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This set includes pads for both the front and rear brakes.

This item fits the following BMWs:
2008-2013 E9X BMW M3
2008-2013 E82 BMW 1 M Coupe

• Precision-engineered to fit BMW E84 and E9X models
• Dimensions: 300x20 mm for enhanced braking power
• High-quality materials prevent rust and warping
• Easy installation for a hassle-free upgrade
• Designed to work seamlessly with OEM and performance brake pads

Benefits:

• Restores braking performance and improves safety
• Reduces vibrations for a smoother stopping experience
• Enhances durability and longevity of the braking system
• Ensures consistent braking response under various conditions
• Ideal for both daily driving and performance applications

BMW E90 E92 Rear Brake Rotors - Pair (300x20) are the ideal choice for replacing worn-out brake rotors on your BMW E90 or E92. These premium rotors from Zimmermann are designed to match OEM specifications, ensuring a perfect fit and reliable performance. If you experience pulsing or vibrations when braking, upgrading your rear brake rotors will restore smooth, confident stopping power.

For maximum braking performance, it's recommended to replace your brake pads along with the rotors. A fresh set of pads and rotors will bring back the responsive braking feel you enjoyed when your vehicle was new. Ensure proper bedding of the new pads and rotors for optimal performance by following the brake pad bedding procedure.

• Direct replacement rotors for BMW E90 and E92 models
• OEM fit and performance from Zimmermann
• Restores smooth, confident braking
• Improves safety by reducing brake pulsing and vibrations
• Recommended to pair with new brake pads for optimal braking performance

Kit Contents:

• 2 rear brake rotors (300x20)

Upgrade your BMW E90 or E92’s braking system with these high-quality rear brake rotors and enjoy restored stopping power.

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2008-2013 E82/88 BMW 135i, 128 with BMW Performance caliper conversion
2006-2009 E9X BMW Submodels with BMW Performance caliper conversion

BMW E90 E92 E93 Front And Rear Brake Pad Kit - EBC RedStuff is the perfect choice for high-performance BMW models driven aggressively on the street. Designed to enhance braking performance, these brake pads feature a low-dusting compound that delivers exceptional stopping power even when the brake discs are cold. The Kevlar fiber-based compound is further enhanced with ceramic particles, ensuring improved longevity and quieter operation compared to previous EBC RedStuff formulations.

Drivers will appreciate that while these hard-wearing pads may require a bed-in period of up to 1,000 miles to fully conform to the shape of the brake rotor, the payoff is a superior braking experience. This kit is ideal for those seeking impressive performance for repeated heavy braking situations.

• Designed specifically for high-performance BMW E90, E92, and E93 models
• Low-dust formulation for cleaner wheels and reduced maintenance
• Exceptional stopping power, even at lower temperatures
• Durable Kevlar fiber-based compound enhanced with ceramic particles
• Quieter operation compared to previous brake pad formulations
• Ideal for aggressive street driving and repeated heavy braking

Upgrade your BMW's braking performance with the BMW E90 E92 E93 Front And Rear Brake Pad Kit - EBC RedStuff for a truly superior driving experience.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.