BMW Performance Intake Kits for BMW 3 Series E92 (2007-2013)

Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.

Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!

The Injen SP series intake system features MR technology.

Features:

+9 hp / +11 lbs. ft. torque
Dry filter element reduces build up on MAF sensor
Lifetime warranty through Injen
T-6061 Billet aluminum
Made in the U.S.A
Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.

In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.

Features:
Powdercoated heat shield
Polished short ram tubing
+11hp/10ftlbs.

Kit Includes:
Short ram intake piping
Heat shield 
SuperNano Dry Web Dry Filters
Mounting hardware
Instructions

This part fits the following BMWs:
2007-2011 BMW 328I (E90/92/93) 
2008-2013 BMW 128I (E82/88) 
2006 BMW 325I AND 330I (E90) 

One Piece Roto-Molded Housing:
A custom CAD designed housing, made from heat soak resistant black cross-linked polyethylene, is used to reduce the number of components and ensure the coolest air intake charge available.

Carbon Fiber Finish Trim Cover:
This carbon fiber finish trim cover is constructed with lightweight vacuumed formed ABS plastic for a sleek appearance.

Roto-Molded Tube:
A CAD designed, dyno-tuned intake tube allows for maximum power gains while maintaining a perfect fit and retaining OE connections.

Large 3-Layer Performance Air Filter:
This aFe Power Pro DRY S, 6-1/2" tall, oil-free, 360 degree radial performance air filter features three layers of progressive synthetic media. The washable and reusable filter is surrounded by a 100% polyurethane frame, allowing for multiple cleaning cycles and an extra long filter life.

Premium Components:
Stainless steel clamps, a silicone coupler, and a silicone hose are provided for strength and durability while also providing the most secure installation available. Magnum FORCE Stage-2 Si intakes are designed with fewer parts for a fast and easy installation.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
E9X M3
 

Improve the performance of your BMW's N54 3.0L engine with the HKS BOV in a striking silver finish. Blow off valves play a crucial role in turbocharger systems, and selecting the right one is essential when enhancing the performance of a turbocharged vehicle. The aftermarket HKS BOV, tailored for larger quantities of air and higher pressures, ensures optimal handling of additional airflow.

• Enhanced Turbocharger Performance: The HKS BOV is designed to complement turbocharger systems, optimizing overall performance.
• Increased Airflow Handling: Aftermarket blowoff valves handle larger quantities of air, accommodating the demands of performance accessories.
• Silver Finish: The distinctive silver finish adds a touch of style to your BMW's engine bay.
• Tailored for Higher Pressures: Specifically designed to cope with increased pressures associated with performance upgrades.

Upgrade your BMW's N54 3.0L engine with the HKS BOV in silver, ensuring a reliable and stylish addition to your turbocharger system.

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!

Specs and Features:

• Aluminum Construction
• Black Powder Coating
• 3" Diameter
• CNC Machined Throttle Body Flange
• Dual 1/8" NPT Bungs
• High Pressure T-Bolt Clamps
• All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

This Euro air intake is less restrictive than the stock intake and also allows much easier acces to the air filter from the top. In addition, this airbox uses a cylinder style filter instead of a standard square filter for higher flow. 

The MAF sensor from your original airbox will need to be reused as the connector in the Euro box is a small 2-pin connector.

GENUINE BMW INTAKE MUFFLER.

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S65 intake. Dinan improves on the factory air box system by using a larger K&N filter combined with a precision molded carbon fiber intake tube. The increased amount of air feeds the engine and elicits a slightly more audible and sporty tone over its stock counterpart. Dinan claims 8hp and 5ft-lb torque gain with this kit.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: Convertible models require modification to a factory chassis brace. Detailed instructions are included.

*NOT CARB APPROVED 

This item fits the following BMWs:
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

Want more power out of your N55? The Momentum GT Pro DRY S Cold Air Intake is the best system for creating power, airflow, and maximizing performance. This system provides a +16% air-flow increase over stock, allowing the car to breathe to its best ability. The Pro Dry S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned.

• 400CFM Rating @ 7" Hâ‚‚O
• +12 HP and +14 lbs. x ft. Torque max gains
• Outflows factory intake by 16%
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Inlet
• CAD-Designed Roto-Molded Intake Tube
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro DRY S oil-free 3-Layer Synthetic Media for Maximum Convenience
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on Factory Parts for Faster Installation

Unique One-Piece High Quality Housing:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the air box.

High Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
E9X 335i, 335xi