Schwaben offers the right tools to make your next project a success. Everything from complex engine scanners to brake bleeders and spring compressors, Schwaben tools has you covered.

Some of the recommended use include but are not limited to:

• Remove and install rear ball joints on E38, E39, E60/61, E63/64, E65/66, and E70's
• Removal and installation of ball joints and bushings on rear control arms on E36, E46, E39, E60/61, E63/64,  E65/66, E70, E83 and E85/86 Z4's
• Removal and installation of rear sub frame mounted differential bushings on E36, E46, E83 and E85/86 Z4's
• Removal and installation of rear differential mounted bushings on E36, E46, E9X, E60/61, E63/64, E65/66, and E85/86 Z4's

The drive shaft support bearing is essential for stabilizing the drive shaft and ensuring smooth, efficient power delivery. Over time, the rubber mount surrounding the bearing can degrade, leading to excessive drive shaft movement and noticeable vibrations.

If you notice a thudding or clunking noise during acceleration, especially coming from beneath the center console, a failed center support bearing is likely the cause. Bremmen Parts provides a reliable and affordable replacement solution, designed to restore your BMW’s performance and driving comfort.

Maintain peak performance and extend the life of your transmission with the Bremmen Parts DCT Transmission Filter. Engineered to block harmful contaminants, this premium filter protects vital components such as solenoids and fluid passages, ensuring smooth and reliable operation.

A clogged or worn transmission filter can restrict fluid flow, leading to delayed shifts, harsh gear engagements, or even severe transmission failure. Replacing the filter during routine fluid service or after major component replacements like the clutch pack, pump, or fluid pan is critical to preserving your transmission’s performance.

Choose Bremmen Parts for a durable, high-quality solution designed specifically for your BMW’s dual-clutch transmission.

This hand held Schwaben tool makes changing fluids an easy, quick task.The Schwaben fluid suction/fill pump suitable for oils, water and any non corrosive liquid.

Features 

• Comes with a flexible and a rigid tube. 
• Flow rate is adjustable for different functions.
• 350 ML capacity
• Cylinder is marked in 20 mL increments and fraction of quarts for accurate filling. 

Not for use with gasoline.

Choose GSP for Your Hub Assembly, Axle Shaft, and Loaded Strut Needs

Since 2004, GSP has been a trailblazer in the North American axle industry. With an extensive range of applications, a wide SKU count, and a track record of introducing the latest applications ahead of the competition, GSP is the go-to choice. In 2010, GSP expanded into hub assemblies and swiftly earned the trust of the industry, becoming the most reliable brand.

When it comes to your hub assembly, axle shaft, and loaded strut needs, you can have full confidence in GSP's expertise.

Key Features:

• Superior quality based on long term development through ISO/TS16949 certifications
• The strictest quality control standards to ensure the best end result to the customer
• Constructed of high-quality materials for a superior product at a low price
• Designed for application-specific needs
• Consistently driving to offer the broadest catalog

The ACT Streetlite flywheel offers the following benefits:

Noticeably improved engine response and acceleration: Experience a significant boost in engine performance and acceleration with this component. OE to mild gear rattle: Expect only minimal gear rattle, from Original Equipment (OE) standards to a mild level, ensuring a smoother drive. Heat-treated forging for strength and toughness: Crafted using heat-treated forging, this part guarantees enhanced strength and durability. Induction-hardened ring gears for maximum life: The ring gears undergo induction hardening, providing maximum lifespan and reliability. One-piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc: The one-piece design reduces potential failure points and ensures uniform and efficient heat transfer from the clutch disc, preventing issues like warped inserts or loose ring gears. Recommended for street and race use: This component is ideal for both everyday street driving and competitive racing environments.

Forged, CNC machined, and dynamically computer balanced for smooth high RPM reliability: Expertly forged, CNC machined, and dynamically balanced via computer to ensure smooth and reliable performance at high RPMs.

Commonly used when replacing axle shaft boots.

Features:

• Crimp and flatten design
• Produces a clean factory style crimp
• Limited Lifetime Warranty

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit is their most popular and features a Heavy Duty pressure plate, a Performance Street sprung clutch disc, and an XACT Streetlite Flywheel.

The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate  pedal feel, and heat treated diaphragms for increased strength and performance.

Next in this kit is the Performance Street clutch disc. This is the most popular sprung clutch disc and features high quality organic friction material with a high copper content for improved heat transfer and a steel backed lining for increased strength in burst load circumstances. This organic clutch disc has a significantly higher torque capacity than a stock disc but still retains a long life span and operates quietly and reliably.

The final main component is the XACT Streetlite Flywheel. This option is the most popular thanks to it versatility for street driving and drag/track style racing, its lighter weight for increased throttle response, and its single mass design.

Clutch Kit Specs:

• Torque Rating: 440 ft/lbs
• 45% torque capacity increase over stock!
• Type of Disc: Street
• 26-count spline
• Spline Size: 1-3/8" inch
• Disc Weight: 3.5 lbs
• Pressure Plate Weight: 10.2 lbs
• Flywheel Weight: 24.5 lbs
• 1 year Warranty from retail purchase date!

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit features an Xtreme pressure plate and an R6 racing clutch disc.

Their Xtreme pressure plate offers a 50-120% clamp load increase, moderate to heavy pedal feel, and is recommended for high performance street and racing applications. All diaphragms went through a four stage heating process for increased strength and unparalleled performance.

Next in this kit is the R6 racing clutch disc. This disc is an unsprung, rigid disc with 6 pads that is best suited for drag and road racing and handles heat better thanks to its increased surface contact area versus the 4 pad version of this disc, the R4. The R6 pads are composed of ceramic friction materials and the disc has a chome-moly hub that is heat treated for additional strength under high load engagements. Over stock, this disc is much better for faster shifting and significantly higher torque loads. Unlike the stock disc, this racing disk has a slightly shortened life span due to its rigid design and pad composition. This in turn is offset thanks to its fast, aggressive engagement for track use.

Clutch Kit Specs:

• Torque Rating: 665 ft/lbs
• 117% torque capacity increase over stock!
• Type of Disc: Racing
• 26-count spline
• Spline Size: 1-3/8" inch
• Disc Weight: 4 lbs
• Pressure Plate Weight: 10.7 lbs
• 1 year Warranty from retail purchase date!

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs: 

2008+ E82 BMW 128i 135i 135is 
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan 
2006-2012 E91 BMW 328i - Wagon 
2007-2013 E92 BMW 328i 335i 335is - Coupe 
2007-2013 E93 BMW 328i 335i M3 - Convertible 
2013+ E84 BMW X1 sDrive28i 
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is