BMW Engine Parts for BMW 3 Series E92 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

ECS - Corporate Logo
T#:363147
Part#: 003296ECS01
Ships in 1 Business Day
Sale - Save 25% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
Sale - Save 25%
$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove.
Genuine BMW - Corporate Logo
T#:12497
Part#: 11367585425
In Stock
$ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 250.33 USD
Free Shipping
$ 250.33 USD
Free Shipping

The VANOS system on your N51, N52, and N54 engine controls the valve timing inside the engine. The system is hydraulically operated based on instructions from the engine computer. It's very complex and BMW has not yet perfected the system. The VAN0S solenoid is the actuator that takes instruction from the ECU and activates the VANOS unit on the front of the engine. When the solenoid is failing (or failed) you can end up with a rough running engine, misfires, bad fuel economy, lack of power, and more. It should trigger multiple fault codes and a check engine light for misfires, camshaft control, VAN0S solenoid, boost pressure control, and maybe others. It's important to thoroughly troubleshoot fault codes but VAN0S solenoids are a known issue with these engines.

The VANOS solenoids are located on the front of the engine and may be replaced without removing many other components. In some cases, you may be able to remove the suspect one, clean it, reinstall, and reset your fault codes. If your fault codes come back it's a strong indication that a replacement is required. Or you can buy the new solenoid and replace instead of doing the work twice.

VANOS solenoid for the intake and exhaust are the same part number. Order 2 if you want to replace them both.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

We recommend replacing the solenoid sealing gaskets as well when replacing the solenoid. You can find these under T#363393

This item fits the following BMWs:
2008-2012 E82 BMW 128i 1M Coupe
2008-2010 E82 BMW 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335is - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335is - Coupe
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009-2011 Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less
Performance Kevlar Reinforced Belt - E82/88 E9X N54
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:5858455
Part#: 7PK1855
Ships on Nov 12, 2026
$ 41.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287628652 and 11287568247 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less

Genuine BMW - Corporate Logo
T#:599758
Part#: 11377603979KT1
In Stock
$ 659.99

This product was last offered at the strikethrough price on
10-08-2026

$ 658.99 USD
Free Shipping
$ 658.99 USD
Free Shipping

Valvetronic Actuator Replacement Kit

Revitalize your engine's Valvetronic system with the Valvetronic Actuator Replacement Kit. This comprehensive kit includes the Valvetronic actuator, actuator gasket, and valve cover gaskets, ensuring a complete overhaul for optimal performance. Crafted to OEM specifications, these components guarantee precise fitment and reliable functionality. Say goodbye to Valvetronic issues and restore your engine's efficiency with this all-in-one replacement kit.

Show More Show Less

Spark Plugs - Set Of Six (ILZFR6D11) - N52 3.0L
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:370526
Part#: ILZFR6D11KT6
Ships in 5 Business Days
$ 130.99

This product was last offered at the strikethrough price on
05-07-2026

$ 77.99 USD
Free Shipping
$ 77.99 USD
Free Shipping

Revitalize your BMW's performance by addressing poor idle, fuel inefficiency, and engine misfire issues caused by worn-out spark plugs. NGK offers the ultimate solution with their high-quality aftermarket spark plugs. Over time, electrode wear leads to increased gaps and weakened sparks, while carbon buildup can impair performance. These upgraded plugs are designed to restore power, fuel efficiency, and smooth out an irregular idle, ensuring optimal engine functionality.

  • Solves poor idle, low fuel efficiency, and engine misfire problems
  • Enhances engine power and fuel efficiency
  • Addresses electrode wear and carbon buildup issues
  • Ensures quality NGK replacement for improved performance
Show More Show Less
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Continental - Corporate Logo
T#:201819
Part#: 11287549150
In Stock
$ 40.03

This product was last offered at the strikethrough price on
05-19-2026

$ 26.45 USD
Free Shipping on orders $49 and up
$ 26.45 USD
Free Shipping on orders $49 and up

Continental is the OEM supplier for the stock serpentine accessory belt on your N52 engine.?Over time, accessory belts begin?to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belt on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance.

Fits the following BMW chassis:
E90 E82/8 E60 E70 E83 E63/64

Show More Show Less
Genuine BMW - Corporate Logo
T#:36640
Part#: 11617836553
In Stock
14% off MSRP $ 63.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.03 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 63.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.03 USD
Free Shipping on orders $49 and up
The PCV system removes engine blow-by gases and flushes the crankcase with fresh air. PCV system problems result in numerous and sometimes severe problems including multiple oil leaks, contamination of multiple sensors and catalytic converters, deposit build-up in the air intake passages, and failed emissions tests.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
Ships in 1-2 days
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less

Genuine BMW - Corporate Logo
T#:19197
Part#: 11137548031
In Stock
18% off MSRP $ 71.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.95 USD
Free Shipping on orders $49 and up
18% off MSRP
$ 71.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.95 USD
Free Shipping on orders $49 and up
This is the Genuine BMW engine oil pan gasket for cars with the N52 and N54 6 cylinder engines. This gasket goes between the engine block and the oil pan and requires replacing the aluminum oil pan bolts.

Oil Pan Bolts for E82, E90, E92, E93, E85, E89 models with MANUAL Transmission are Part # 11130396707.
Oil Pan Bolts for E82, E60, E70, E71, E85, E89, E90, E92, E93 models with AUTOMATIC Transmission are Part # 11132210959.
available for purchase below

This item fits the following BMWs:
2008-2010 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335is - Coupe
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335is- Convertible
2007-2010 E93 BMW 335i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2008-2010 E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:5691134
Part#: FXXOCC-B
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in a variety of vehicles(check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less
N54 Valve Cover
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2438612
Part#: 11127565284
In Stock
$ 284.99 USD
Free Shipping
$ 284.99 USD
Free Shipping
Complete valve cover assembly with gasket, bolts, and integral cyclone separator


OEM Valeo Alternator - 180amp - E9X M3 S65
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377508
Part#: 12317837981
In Stock
$ 630.99

This product was last offered at the strikethrough price on
05-07-2026

$ 404.99 USD
Free Shipping
$ 404.99 USD
Free Shipping
This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!
OEM Accessory Belt Service Kit - N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:554448
Part#: N54ACCKT
Ships in 1 Business Day
Sale - Save 5% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD
Free Shipping
Sale - Save 5%
$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less
Alternator - 180amp
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:26438185
Part#: 12317837981
In Stock
Sale - Save 15% $ 304.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.24 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 304.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.24 USD
Free Shipping on orders $49 and up

ECS - Corporate Logo
T#:20979672
Part#: 6PK1460
Ships on Nov 12, 2026
$ 33.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287837898 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less

NRW Design - Corporate Logo
T#:42403028
Part#: S65VANOS
Ships in 3 Business Days
$ 331.99

This product was last offered at the strikethrough price on
08-07-2026

$ 289.99 USD
Free Shipping on orders $49 and up
$ 289.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW S65’s reliability and performance with these precision-engineered Billet Chromoly Vanos Covers your engine deserves.
Bosch - Corporate Logo
T#:591891
Part#: 13537620946
In Stock
$ 98.99

This product was last offered at the strikethrough price on
07-06-2026

$ 57.99 USD
Free Shipping on orders $49 and up
$ 57.99 USD
Free Shipping on orders $49 and up
A vital component for high pressure fuel system function

Aluminum Valve Cover Set - Gloss Red - E9X M3 S65 4.0L
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:40985128
Part#: 1112784815XREDKT
In Stock
Sale - Save 18% $ 1,040.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.58 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 1,040.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.58 USD
Free Shipping on orders $49 and up

The factory magnesium valve covers on the S65 engine are known for developing micro-porosity, corrosion, and persistent oil leaks over time. This material is highly susceptible to oxidation, leading to unsightly surface imperfections, weakened gasket channels, and sealing issues that a simple gasket replacement won't fix.

Upgrade to this high-strength aluminum valve cover set, engineered as a direct-fit replacement for your aging OEM covers. Unlike magnesium, aircraft-grade aluminum offers superior durability, enhanced heat resistance, and complete immunity to the corrosion issues that plague factory covers. Whether you're refreshing a high-mileage M3 or seeking long-term reliability, this upgrade ensures a leak-free, worry-free solution for your S65.

This valve cover set includes gaskets, bolts, and oil separators for a comprehensive replacement.

Features:

Eliminates the common porosity and corrosion issues found in factory magnesium covers.

Helps maintain optimal engine temperatures and enhances long-term reliability.

Gloss red finish provides a much-needed boost in engine bay aesthetic.

Designed for an OEM-like installation without modifications.

Reduces the risk of oil leaks, ensuring a proper seal.

Resistant to oxidation and chemical exposure for a long-lasting clean look.

Show More Show Less
Continental - Corporate Logo
T#:14481
Part#: 11287628652
Back Ordered
$ 36.44

This product was last offered at the strikethrough price on
04-28-2026

$ 28.28 USD
Free Shipping on orders $49 and up
$ 28.28 USD
Free Shipping on orders $49 and up
This is the main drive belt / serpentine belt 7PK x 1855 that drives all of the engine auxillaries, such as the alternator, A/C and power steering pump. If your belt has excessive cracks, dry rot, missing teeth and/or grooves, or are causing noise, it's time for a new one.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E92 BMW 335is - Coupe
2007-2010 E93 BMW 335i Convertible
2011-2013 E93 BMW 335is Convertible
Show More Show Less

OEM INA Belt Tensioner - E9X E82 E60 E82 with N54 engine
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19305
Part#: 11287563927
In Stock
$ 107.99

This product was last offered at the strikethrough price on
04-15-2026

$ 72.50 USD
Free Shipping
$ 72.50 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belts on BMW's with the N54 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less

ECS - Corporate Logo
T#:5858460
Part#: 7PK1860
Ships on Nov 12, 2026
$ 49.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287628653 and 11287570664 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less
Blow-By Vent Hose
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:30629687
Part#: 11157553949
In Stock
Sale - Save 20% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.08 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.08 USD
Free Shipping on orders $49 and up
Elring - Valve Cover- BMW N52 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2438600
Part#: 11127552281
In Stock
$ 325.99

This product was last offered at the strikethrough price on
06-05-2026

$ 274.99 USD
Free Shipping
$ 274.99 USD
Free Shipping
A complete valve cover assembly with bolts and gaskets


Bimmerworld - Corporate Logo
T#:1120864
Part#: 100.11.530.0003
In Stock
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

  • Mounts in stock oil pressure sensor location for easy installation
  • Allows use of up to two aftermarket sending units in addition to the factory sensor
  • Incorporates factory sending unit for utilizing the factory oil pressure light
  • Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
  • Includes banjo bolt and crush washers for secure installation
  • Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30
Show More Show Less
OEM Accessory Belt Service Kit - E82/88 E9X N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:567679
Part#: 11287582946KT4
Ships in 1-2 days
$ 213.63 USD
Free Shipping
$ 213.63 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less
Genuine BMW Front Crankshaft Seal
For vehicles with a production date from 02/2011
Genuine BMW - Corporate Logo
T#:187246
Part#: 11118618864
In Stock
28% off MSRP $ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.79 USD
Free Shipping on orders $49 and up
28% off MSRP
$ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.79 USD
Free Shipping on orders $49 and up
Genuine BMW Shaft Seal

New OEM Bosch Starter Motor - N52, N54, N55, up to 03/11
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:394329
Part#: SR0492N
In Stock
$ 249.17

This product was last offered at the strikethrough price on
08-14-2026

$ 237.99 USD
Free Shipping
$ 237.99 USD
Free Shipping

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

Show More Show Less

Insane Performance - Corporate Logo
T#:3729859
Part#: CH-4PIN
Ships in 1-2 days
$ 1,099.00 USD
Free Shipping
$ 1,099.00 USD
Free Shipping
The Insane Crank Hub kits are designed and manufactured in Lithuania and made from a solid block of thermally absorbed, heat-treated steel and milled on a 5 axis precision CNC machine to create what they believe to be the strongest crank hub kit on the market today!
Show More Show Less
Genuine BMW - Corporate Logo
T#:32404
Part#: 11211439395
In Stock
4% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Bolt
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N,N54,N54T

Show More Show Less

Slon Workshop - Corporate Logo
T#:35053681
Part#: SLON-E9XM-5VCK
In Stock
$ 390.00 USD
Free Shipping
$ 390.00 USD
Free Shipping

Enhance the durability of your BMW E9X M3 (S65) engine with the Slon Workshop Vanos Covers Kit. The OE plastic vanos cover is known for cracking and failure, posing a risk of plastic debris in the engine. Replace it with the IND Slon upgraded vanos covers for added peace of mind, preventing potential issues and ensuring the longevity of your engine.

  • Vanos Covers Kit for BMW E9X M3 (S65)
  • Upgraded design for enhanced durability
  • Prevents cracking and failure of the OE plastic vanos cover
  • Reduces the risk of plastic debris in the engine
  • Provides an extra level of peace of mind for engine safety
Show More Show Less
VAC Motorsports - Corporate Logo
T#:26038565
Part#: VAC-OPB-N55
Ships in 3 Business Days
$ 199.99 USD
Free Shipping on orders $49 and up

Upgrade your BMW's oil system with the VAC Motorsports N55 Oil Pan Baffle, an essential component for track and street enthusiasts. Engineered to maintain oil surrounding the pick-up at all times, this baffle is crucial for preventing oil pressure loss during hard cornering and acceleration. Trusted by some of the fastest BMWs worldwide, this baffle ensures engine longevity and performance under extreme conditions. Don't risk catastrophic engine failure—equip your BMW with the VAC Motorsports N55 Oil Pan Baffle today.

Benefits:

  • Prevents significant loss of oil pressure
  • Vital for track and street use
  • Ensures engine longevity and performance
  • Trusted by high-performance BMWs worldwide
Show More Show Less

URO - Corporate Logo
T#:578702
Part#: 22116760330
In Stock
$ 52.99 USD
Free Shipping on orders $49 and up
Don't neglect your motor mounts! Most stock BMW motor mounts are fluid-filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is significantly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine moves around, it can contact other parts in the engine bay - usually cooling-related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).
Show More Show Less

N52 Valvetronic Camshaft Adjuster Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5416764
Part#: 11377548388TMSKT
In Stock
Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD
Free Shipping
Sale - Save 19%
$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD
Free Shipping
Includes new Valvetronic motor, gasket, and hardware. The Valv-tronic adjuster unit changes the the timing shaft to adjust the valve timing.
Oil Pan Gasket - With Bolts - N52 & N54 3.0L
For automatic transmissions Only!
Genuine BMW - Corporate Logo
T#:24677028
Part#: 11132210959KT2
In Stock
$ 127.99 USD
Free Shipping on orders $49 and up
$ 127.99 USD
Free Shipping on orders $49 and up

Enhance Your BMW's Engine Performance with Genuine Oil Pan Gasket - With Bolts Kit

Upgrade your BMW's oil pan gasket with the Genuine part number 11132210959 kit. This essential component is prone to leakage over time, affecting engine performance.

Addressing this issue offers several benefits:

  • Genuine part ensures quality and compatibility.
  • Prevents oil leaks for improved engine performance.
  • Comprehensive kit includes necessary bolts for installation.
  • Long-lasting solution for maintaining optimal engine functionality.

Maintain your BMW's engine health by replacing the oil pan gasket with this Genuine kit.

Show More Show Less
King - Corporate Logo
T#:3929159
Part#: CR222SV0.5
In Stock at Vendor
18% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up
18% off MSRP
$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up

BMW N20 N52 N54 N55 S55 Connecting Rod Bearing Set of 2 Pairs - 0.50mm Oversized is designed to elevate your engine’s performance and reliability. Developed with high-performance driving in mind, this connecting rod bearing set from Turner Motorsport offers superior durability and support. Each set includes 2 upper and 2 lower bearing shells, crafted from a lead-free, silver-based tri-metal material that is specifically engineered for extreme load applications. These bearings are meticulously designed to meet exact standards, ensuring optimal fitment and compatibility with your BMW engine, resulting in smoother and more reliable operation.

  • Enhanced Engine Performance: Provides superior support and stability for high-performance driving.
  • Durable Construction: Lead-free, silver-based tri-metal material designed for extreme loads.
  • Precise Fitment: Engineered to exact standards for compatibility with BMW N20, N52, N54, N55, and S55 engines.
  • Improved Reliability: Ensures smoother engine operation and reduced wear over time.
  • Complete Set: Includes 2 upper and 2 lower bearing shells for 2 connecting rods.
Show More Show Less


Braille - Corporate Logo
T#:558037
Part#: B14115
Ships in 5 Business Days
$ 204.99 USD
Free Shipping on orders $49 and up
When building a car for the track, one of the most important factors to consider is weight. Stock batteries can weigh up to almost 50 pounds and are unnecessarily large, designed to power a host of systems not normally used in a track car (radios, lighting, etc.). What can you do to cut weight the weight without affecting your cars operation? This is where Braille Battery comes in with their long line of performance lightweight battery options! Designed to provide the highest cranking power possible while being up to 75% lighter, Braille Battery is one of the foremost leaders in automotive racing batteries with nothing but high quality, high output batteries in mind!
Show More Show Less
Braille Performance Endurance AGM Battery - B10049 - 58lbs
This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi
Braille - Corporate Logo
T#:558078
Part#: B10049
Ships in 8 Business Days
$ 446.99 USD
$ 446.99 USD
This Group 49 Endurance AGM battery is an ideal upgrade from the factory battery, offering higher cranking power and a longer battery life for less waste and lower cost to the customer. Plus, this battery is maintenance free and won't eat holes in the battery tray and surrounding areas of your car. Endurance AGM batteries from Braille are a drop-in OEM replacement that requires no modifications to be made for installation, has the highest cranking power and longest run times in their class, and also feature AGM internal racing technology developed for their Advanced AGM and Carbon Fiber batteries.
Show More Show Less
Oil Pan Gasket
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:26305093
Part#: 11137548031
In Stock
Sale - Save 19% $ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.99 USD
Free Shipping on orders $49 and up

Goldenwrench Supply Co - Corporate Logo
T#:5691129
Part#: FXXCET-B
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in a variety of M vehicles(check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less

Oil Level Indicator - 12617607910
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:36913378
Part#: 12617607910
In Stock
Sale - Save 15% $ 153.99

This product was last offered at the strikethrough price on
05-03-2026

$ 130.89 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 153.99

This product was last offered at the strikethrough price on
05-03-2026

$ 130.89 USD
Free Shipping on orders $49 and up
The engine oil level sensor tracks the oil level in the engine's oil pan, sending real-time data to the ECU (Engine Control Unit). This vital information ensures the engine has the right amount of oil for proper lubrication. Commonly featured in modern vehicles, the oil level sensor acts as an essential safeguard against low oil levels, helping prevent potential engine damage.
Show More Show Less

Genuine BMW - Corporate Logo
T#:21328
Part#: 61366915327
In Stock
$ 27.99 USD
Free Shipping on orders $49 and up
Commonly used in multiple BMWs, usually controlling fuel pump operation.
VRSF 2" OEM Location High Flow Silicone Inlet Kit - N54
We Price Match - Give Us A Call or Chat! 2" Inlets
VRSF - Corporate Logo
T#:585222
Part#: 10901052
In Stock
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Improve your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.
Show More Show Less

Genuine BMW - Corporate Logo
T#:39433
Part#: 12427549393
In Stock
1% off MSRP $ 60.40

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.99 USD
Free Shipping on orders $49 and up
1% off MSRP
$ 60.40

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.99 USD
Free Shipping on orders $49 and up


Genuine BMW Ground Cable
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93

Fits BMW Engines including:
M57,N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

034Motorsport - Corporate Logo
T#:389756
Part#: 034-509-N5X
In Stock
$ 330.00 USD
Free Shipping
$ 330.00 USD
Free Shipping

Collapsing and worn engine mounts can mean big trouble for N52/N54/N55 cars. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased wtih these solid rubber versions.

Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted engine and transmission motion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better shifts.

Sold as a set of matching engine and transmission mounts.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less
Hamburg Tech - Corporate Logo
T#:45449396
Part#: 16117222391
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.
BMW N54 3.0L Blow-By Vent Hose
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:594297
Part#: 11157553949
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up
This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. When installing one of our N54 Oil Catch Cans the connections on this hose will often break. We recommend replacing this hose at the same time as your catch can. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Show More Show Less


N-Series Performance Black Ignition Coils - Set Of Six
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:20815175
Part#: D650-0002KT1
In Stock
Sale - Save 10% $ 205.99

This product was last offered at the strikethrough price on
09-29-2026

$ 184.79 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 205.99

This product was last offered at the strikethrough price on
09-29-2026

$ 184.79 USD
Free Shipping on orders $49 and up

For BMW M54 applications, coil styles vary between M or N depending on the vehicle's production date. Models produced up to September 2002 require the M series style coil, while those manufactured after September 2002 use N series style coils. It's crucial to visually compare and verify the correct coil needed for your vehicle before making a purchase.

Benefits:

  • Specific coil styles for different BMW M54 application dates
  • Helps ensure the right replacement part for your vehicle's coil
  • Visual verification recommended prior to purchase for compatibility
Show More Show Less
Powerflex - Corporate Logo
T#:6924323
Part#: PFF5-4020
In Stock
$ 56.99 USD
Free Shipping on orders $49 and up
Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience. Powerflex is pleased to introduce their new N54, N55, and B58 Engine Mount Inserts, intermediate alternatives to the BMW aluminum inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in Yellow 70A durometer material, they are designed to fit the OE mounts snuggly to restrict engine movement with a minimal increase in NVH, perfect for those with tuned road cars. Their design and flexibility also mean they can be fitted to the vehicle without removing the engine mounts themselves. Reducing engine/transmission movement by way of upgraded inserts has the following benefits: Sharper throttle response Improved gear shifting More direct power transfer More balanced on/off throttle handling Prolonged life of the OE mounts A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine and chassis. The harder the material used, the greater the NVH transmitted.
Show More Show Less