BMW Cooling System Parts & Accessories for BMW 3 Series E92 (2007-2013)

Upgrade your cooling system with durable silicone hoses that offer extended life and enhanced heat tolerance. Say goodbye to stock limitations and opt for silicone hoses that retain OEM fitment while overcoming typical OEM hose flaws. These hoses are designed to resist deterioration and softening due to coolant heat cycles, ensuring prolonged longevity compared to traditional rubber hoses.

Specifically, this hose connects from the thermostat housing outlet to the front of the cylinder head. Its features include:

• Inclusive of both upper and lower clamps for easy installation.
• Crafted from 4-Ply reinforced silicone, ensuring superior durability compared to OE rubber hoses that are prone to failure.
• Internal layer lined with Flourosilicone for exceptional chemical resistance.
• Silicone construction provides reduced thermal conductivity, enhanced resistance to ozone, and UV degradation, thereby boosting overall performance and longevity.

Ensure your BMW's cooling system stays in top shape with ECS Tuning's Billet Aluminum Radiator Drain Plug. Designed specifically for late-model 1-Series and 3-Series BMWs, this replacement plug addresses the common issue of weak plastic drain plugs. Constant exposure to engine heat and road debris makes the plastic plugs brittle, leading to frustration with broken plugs. ECS Tuning's billet aluminum alternative puts an end to these problems.

• Durable Replacement: Say goodbye to weak plastic drain plugs.
• Enhanced Material: Billet aluminum provides superior strength and longevity.
• Deeper Screw Head: Accommodates Phillips head or flat head screwdrivers for better engagement.
• Reduced Stripping Risk: Minimize the chance of stripping out the screw head.

Don't let cooling system maintenance be a hassle. Order ECS Tuning's Billet Aluminum Radiator Drain Plug now and experience worry-free service.

Ensure optimal cooling for your BMW's engine with this essential Coolant Supply Hose to the heater core. When cooling pipes and hoses show signs of wear like bulges, cracking, or loss of flexibility, it's crucial to replace them promptly to prevent engine overheating.

• Vital coolant supply hose for the heater core
• Prevents engine overheating
• Easy detection of wear with visible signs like bulges and cracking
• Ensures proper cooling system functionality
• Ideal for maintaining engine performance and longevity

Replace worn-out coolant hoses promptly, examining the entire cooling system, including plastic hose flanges prone to cracks. This ensures a comprehensive solution to prevent leaks and maintain your BMW's cooling efficiency.

Upper and lower radiator silicone coolant hose kit to upgrade from your stock rubber hoses. Includes stainless steel hose clamps.

Upgrade all of those common, aging, dry-rotted rubber hoses under the hood of your vehicle with ECS durable, Silicone Radiator Coolant Hose Set. These perform and look great within any engine bay, they are made to last longer than standard rubber hoses and are perfectly molded to the OE hose specifications for a simple installation on most vehicles.

Made from heavy duty, reinforced silicone, this silicone coolant hose set can handle higher temperatures and greater pressure than the stock, squishy rubber hoses. Designed to resist oil, fuel and electrochemical degradation and tested up to continuous 250° Fahrenheit operating temperature and over 45psi, you can expect to achieve greater reliability, less turbulence and improved flow with our smooth silicone hoses.

Kit contents:

Upper Radiator hose
Lower Radiator hose
4 factory flange connections
German-style stainless steel hose clamps
With the smoother internal passageways, consistent hose internal diameters, and smoother bends will result in improved flow for greater cooling system performance with added durability.

The perfect way to take the worry out of your coolant hoses and keep your engine from potentially overheating.

This is the upper radiator hose that goes from the engine to the top of the radiator with either N51 or N52 enigne.

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2009+ Z4 BMW Z4 sDrive30i

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.

This is the radiator drain plug (petcock valve) for manual transmission E82 and E9X models. The plug actually has two drains built in - the traditional blue petcock valve which is part of the hex head. If you drain the coolant from your radiator through this plug you could be in for a nasty surprise. The hex plug has tabs that lock it into position in the factory BMW radiator. Once it's installed the tabs lock in place. But if you remove the hex completely, the tabs snap off and the plug will no longer seal correctly! Do not drain your coolant without having one of these on hand as a spare! It's cheap insurance against a definite leak later on.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Fits manual transmission only.

Note: the Behr OEM radiator that we sell does not use this same drain plug. It has it's own drain plug that does not use the tabs. You won't need the factory BMW drain plug ever again.

Also known as a Genuine BMW Control Sleeve
This item fits the following BMW Chassis:
2008-2013 E82 BMW 135i 135is 1M Coupe
2013+ E84 BMW X1 sDrive28i X1 xDrive28i X1 xDrive35i
2009+ E89 BMW Z4 sDrive28i Z4 sDrive35i Z4 sDrive35is
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is- Convertible
Fits BMW Engines including:
N20,N54,N54T,N55
 

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation on your S65-equipped E9X M3. Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time. Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency. Pre-installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors. Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit. Kit Includes:

Upper Radiator Hose Lower Radiator Hose Pre-Installed Factory "Quick-Connect" Flanges (4) Stainless Steel Worm-Drive Hose Clamps (4) Replaces OEM Part Numbers: 11537838214 & 11537840661.

BMW E82 E9X Radiator Return Hose is an essential replacement part for maintaining optimal cooling system performance in BMW E82 and E9X models. Designed to fit seamlessly into your vehicle’s cooling system, this radiator return hose ensures efficient coolant flow, helping to prevent overheating and potential engine damage.

• Perfect Fit: Specifically designed for BMW E82 and E9X models, ensuring compatibility and reliable performance.
• High-Quality Construction: Made from durable materials to withstand high temperatures and pressure.
• Efficient Cooling: Maintains proper coolant flow to help prevent engine overheating.
• Easy Installation: Direct replacement for the original hose, making installation straightforward.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation.
Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time.
Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency.
Pre-Installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors.
Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit.
Kit Includes:

Upper Radiator Hose
Lower Radiator Hose
Pre-Installed Factory "Quick-Connect" Flanges (4)
Stainless Steel Worm-Drive Hose Clamps (4)
Replaces OEM Part Numbers: 17127599450 & 17127540127