Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Optimize your BMW's performance by adjusting your diverter or blow-off valve using this kit containing four springs with varying strengths. When noticing excessive pressure release or a drop in boost pressure, it's an indicator that a stronger spring might be necessary.
Important Notes:
Valve Spring Color Coding:
Forge Motorsport is thrilled to present a LIMITED EDITION version of their highly popular solenoid driven valve, specifically designed for the Gen 2 MINI Engine. This exceptional product is meticulously crafted to cater to BMW Mini Cooper S models equipped with N14 engines, including Gen 2 Cooper S 2007-2010 and JCW 2009-2012, featuring electronically controlled bypass valves. It's the ultimate choice for vehicles that have had their boost pressure increased through ECU software upgrades or for unmodified vehicles operating in warmer climates, providing a dependable solution to prevent common failures.
It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.
Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.
This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.
Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.
This alloy hard pipe fits to the throttle body and incorporates our high flow Blow off valve. This new valve fresh from our R&D department is the largest displacement valve that Forge have ever made ! Featuring a 50mm (2”) aluminium piston so that there are no issues with split diaphragms, we have not found the power handling limits of this valve yet ! The piston uses heat stabilised viton o-rings and high temperature Mobil 1 grease to ensure a long life with minimal wear and very long service intervals.
All parts are included in the kit, for your installation, along with comprehensive instructions.
This product fits the following BMWs:
2008 - 2013 E82 135i
2007 - 2013 E9x 335i
The stock valve on the N55 is prone to failure - the plastic often cracks, causing the valve to stop functioning altogether.
This Forge valve unit is engineered with a piston, eliminating the diaphragm entirely. Additionally, the Valve is all aluminum - this is the solution to any failures associated with the OEM valve, making your N55 significantly more reliable. This unit retains the OEM ECU controlled valve actuation as well. Includes a plug and play harness that works with the OEM harness.
Turner Motorsport advises being cautious when removing the OEM recirculating valve; if the plastic is cracked, pieces could fall into the turbo upon removal causing serious damage.
This product fits the following BMWs:
2014+ F22 M235i M235iX
Designed specifically for the BMW Mini Cooper S fitted with the N18 engines, these are Cooper S 2011 onwards and JCW Cooper S 2013 onwards. This product is either recommended where the boost pressure has been increased by an ECU software upgrade or simply for those wanting a loud Blow off sound or simply as a solution to the many failures that have occurred.
Designed with precision for BMW Mini Cooper S models equipped with N18 engines, this product is tailored to fit Cooper S vehicles from 2011 onwards and JCW Cooper S from 2013 onwards. Whether you've recently boosted your vehicle's performance through an ECU software upgrade, desire an attention-grabbing Blow off sound, or need a dependable solution to prevent common failures, this product is the perfect choice for you.
Exclusively available in a limited edition Red color option at Turner Motorsport, it's an opportunity to make a bold and distinctive statement with your Mini Cooper S.
Designed with precision, this product is tailor-made for BMW Mini Cooper S vehicles featuring N14 engines, focusing on Gen 2 Cooper S (2007-2010) and JCW (2009-2012) editions equipped with electronically controlled bypass valves.
MINI R55 to R59 Upgraded Diverter Valve is designed for Peugeot/BMW MINI 1.6 Turbo engines, found in Peugeot 207/307/308 GT Turbo and BMW MINI Cooper S Turbo R56/57 models. This valve is ideal for vehicles with increased boost pressure from an ECU software upgrade and for unmodified vehicles in warmer climates, providing a solution to common failures. Key features include:
This alloy hard pipe fits to the throttle body and incorporates dual high flow Blow off valves. These new valves, fresh from our R&D department are the largest displacement valves that Forge have ever made ! Featuring a 50mm (2”) aluminium pistons so that there are no issues with split diaphragms, we have not found the power handling limits of these valves yet ! The pistons uses heat stabilised viton o-rings and high temperature Mobil 1 grease to ensure a long life with minimal wear and very long service intervals.
All parts are included in the kit, for your installation, along with comprehensive instructions.
This product fits the following BMWs:
2008 - 2013 E82 135i
2007 - 2013 E9x 335i
The stock valve on the N55 is prone to failure - the plastic often cracks, causing the valve to stop functioning altogether.
This Forge valve unit is engineered with a piston, eliminating the diaphragm entirely. Additionally, the Valve is all aluminum - this is the solution to any failures associated with the OEM valve, making your N55 significantly more reliable. This unit retains the OEM ECU controlled valve actuation as well. Includes a plug and play harness that works with the OEM harness.
Turner Motorsport advises being cautious when removing the OEM recirculating valve; if the plastic is cracked, pieces could fall into the turbo upon removal causing serious damage.
This product fits the following BMWs:
2014+ F22 M235i M235iX