Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW Performance Chips & Software

Performance tuning for your BMW gives it more efficient and effective ECU mapping which favor power delivery over comfort. BMW tuning legend Jim Conforti produces incredible software tunes for nearly every model to give drivers a noticeable upgrade in their car's capabilities. The Turner Chips, Shark Injectors, Sprint Boosters, and Burger Motorsports tuning software and handheld devices are all right here for you to give your BMW the engine management change it deserves.
For accurate results, specify your model below.
Drive By Wire BMWs with electronic throttle bodies suffer from a throttle delay that robs acceleration potential. The Sprint Booster for 2001 model years and newer improves throttle response and provides a more direct feel, making the car more predictable and enjoyable.
This category contains parts that fit the following chassis:

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today!

Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! All customers must sign and return an emissions waiver to purchase Burger Motorsports tuning products.

This category contains parts that fit the following chassis:
The easiest software flashing tool in the world! Power & Torque Upgrades in Minutes!

The Shark Injector is an amazing hand-held unit that plugs into your car’s diagnostic port and re-flashes the computer with performance software. The software was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector will also be upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change (under development).

Why you will love this product -
+ more power and torque, particularly in the mid-range from 3500 RPM to redline,
+ quicker throttle response, giving the car a snappier feel,
+ a safe increase in rev limit (great for staying in gear just a little longer)
+ smoother-running engine with fewer hesitations and dead spots
+ top speed limiter removed
+ true DIY install with step-by-step instructions (no downtime while your computer is shipped somewhere else for the install)
+ Upgrade and Restore features to install/uninstall on the same vehicle
+ Upgrade-able via USB connection with your PC - add a file to better suit your mods (under development)
+ Retains all of your diagnostic, service, maintenance systems and won't interfere with your normal maintenance routines

This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

How does it work? The Shark Injector makes changes to the stock BMW software in the areas of fuel enrichment, transition fueling, camshaft timing, ignition timing, and VANOS control to take full advantage of 91+ octane fuel. BMW ‘de-tuned’ cars for the North American market in the event inferior fuel was used. We reverse those changes to gain more horsepower and torque. 91 or higher octane fuel must be used.

How does it install? The Shark Injector plugs into your car’s On Board Diagnostic (OBD) port, located under the dashboard in most cars. At the push of a button the Injector begins communicating with your car’s computer. The Shark handles everything from that point on – reading and copying the stock software, re-loading its own performance version, and checking its work along the way. The whole operation is completed in under 20 minutes. A battery charger with a continuous 10-20amp charge is required (available below if you do not currently own one). Click here for sample installation instructions.


Additional Information:

Click here for our FAQ file for the Shark Injector

Clickhere to view the entire line of Shark Injector products for BMWs and MINI.
This category contains parts that fit the following chassis:
The Fastest Way To More Power - Up To 120hp!!!

Our Performance Software makes more horsepower and torque with no downsides! Performance software is the icing on the cake, the finishing touch, or the capstone for your BMW tuning project. Software ties it all together - maximizing output from upgrades where the factory software can't keep up. The factory software is actually programmed around 87 octane which de-tunes the performance of the car. Our software is set to 91 as a mimimum, allowing us to be more aggressive with the programming. We can refine and adjust the factory limitations, opening up the potential for more horsepower or refinement from your current upgrades. We also tune the software to fix defects and rough edges in the stock software, making the car easier and more enjoyable to drive.

We have been tuning BMW software since 1995, making us one of the most experienced BMW tuners in North America. Over the years we have experimented and tested many different forms and brands of performance software, including developing our own on our Dynapack chassis dyno. Our Performance Software catalog includes tunes and upgrades that best suit your BMW and your upgrade goals.

Turner Motorsport Performance Flash Software features:
+ dyno developed, real-world tested
+ ignition and fuel timing adjustments
+ cam timing, including VANOS and Valvetronic
+ raised rev limit*
+ top speed de-limited*
+ part throttle and full throttle mapping
+ improved throttle response
+ specific software for most major upgrades - cold-air intakes, sport exhaust, etc
+ race software for removing catalytic converters**


* - on select models
** - not legal for street use, emissions liability waiver required
This category contains parts that fit the following chassis:
Our most popular product hands down with tens of thousands sold since 1995! We offer Performance Chips developed by legendary Bosch tuning expert Jim Conforti as well as our own dyno-developed Turner Motorsport custom chips. Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. On most models we also safely raise the rev limit and delete the top speed limiter. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall driveability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.

FREE UPS Shipping is included with any Turner chip priced $249.95 or higher and shipped within the 48 US states. Free shipping applies to the performance chip only and is credited at time of checkout. Please note: for Air shipping, additional shipping charges will be applied when the order is processed.

Resources
Required Vehicle Info. Our chips are not universal. In many cases we need specific information from your car to ensure we supply the correct chip for your model, specifications, and upgrades. Click here before ordering your chip..

Chip Applications. TMS has over 210 unique chip files in our catalog! Click here to download the complete application list of Turner Motorsport Performance Chips (Adobe .pdf file).
Turner Motorsport Chip Upgrade Policy: Turner chips are upgradeable to newer versions for free within the first six months. After six months, the upgrade fee is $100, applicable for custom chips that are equal or less in value of the original purchase price of the chip being traded in. The upgrade program only applies to the original retail purchaser of the chip. This program only applies to software upgrades listed in our catalog and being purchased for the same model of vehicle. Chip trade-up applies only if the upgrades you are installing were purchased from Turner Motorsport. If the parts that require a custom chip are sourced elsewhere other than Turner, the upgrade program does not apply. This program does not apply to dealer/wholesale accounts. 

This category contains parts that fit the following chassis:
For full race or track-only cars, an aftermarket engine management system provides enormous benefits over a stock ECU system. Modern ECU systems are not designed for racing and track use. The engineers have different goals in designing these systems compared to what a motorsports engineer would specify. Racers don't have to be concerned with emissions compliance or OBD diagnostic regulations. All a racer wants is lots of reliable power. And that's where aftermarket engine management - stand alone ECUs - come into play.

We offer stand-alone engine management systems and components from Bosch Motorsport and MoTeC and others. Turner Motorsport has been racing with stand-alone systems for over ten years and have extensive real world experience with building complete systems, existing integration, and providing individual components for upgrades. We have also partnered with Bosch to develop a plug-and-play Motorsport ECU that is integrated with factory wiring harnesses.

This category contains parts that fit the following chassis: