Find Parts That Fit Your Vehicle

Oil Pans and Baffles

Replacing your oil pan can be necessary if you own an older BMW or yours has become dented or damaged. Not only does this part hold all of the oil the internal baffle structure prevents starvation under cornering and acceleration. Making sure your oilpan is intact and leak free will prevent problems down the road.
Sort By:

Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Sale - Save 3%
$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
Advanced Auto Fabrication - Corporate Logo
T#:7624643
Part#: 116183
Ships in 1 Business Day
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7593110
Part#: 11636
Ships in 1 Business Day
$ 150.00 USD
Free Shipping
$ 150.00 USD
Free Shipping
This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. 10 gated holes control oil slosh in the sump. A must have for all track cars. **Note: Requires Welding to install. Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5403285
Part#: 11137548031TMSKT
In Stock
Sale - Save 1% $ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 193.63 USD
Free Shipping
Sale - Save 1%
$ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 193.63 USD
Free Shipping
Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Packaged by Turner - Corporate Logo
T#:337965
Part#: 11131727983
In Stock
Starting at $ 32.99 USD
Free Shipping on orders $49 and up
Starting at $ 32.99 USD
Free Shipping on orders $49 and up
E30 M3 Lower Oil Pan Gasket. Have a leaky oil pan? It may be failed oil pan gaskets (either upper or lower). This is the lower oil pan gasket for the S14 engine. We offer this gasket in both cork and paper gasket media.
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7593089
Part#: 11619
In Stock at Vendor
$ 130.00 USD
Free Shipping on orders $49 and up
$ 130.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. Ten gated holes control oil slosh in the sump. A must have for all track cars. **Note: welding is required to install. Photos of installed baffle for reference.
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7608876
Part#: 116205
In Stock at Vendor
$ 25.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's M20 oil level block off plate for the E30 eliminates the OEM oil level sensor. On the M20 there is an oil level sensor on the oil pan that can be deleted in dedicated motorsports cars. This will allow you to remove a small bit of weight by getting rid of the oil level sender and associated wiring which goes all the way up to the overhead panel. By deleting the plug what you are also doing is eliminating another point of failure and clutter in the engine bay. Includes: Oil level block off plate Two locking nuts Two washers Shown on pan for reference.
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7608845
Part#: 11652
In Stock at Vendor
$ 155.00 USD
Free Shipping
$ 155.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's own M54 E46 Oil Pan Baffle. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. This baffle keeps the oil at the pick up better than others on the market. This pan features a tight fit with an extra tab on the front to keep oil from exiting under braking. Six gated holes control oil slosh in the sump. A must have for all track cars. Features and Benefits Track-proven to prevent oil starvation Directional trap door baffling completely that closes off the oil pump pickup for maximum protection against oil starvation during turning or acceleration Baffle plate with drain-back slots help accelerate return of oil to the bottom of the sump while also preventing oil slosh and reducing oil consumption Reduces the risk of oil starvation when oil levels are low Works with the factory cast aluminum oil pan, which is considered a structural member of the engine block and is less prone to failure or leaking than aftermarket sheet metal pans Light-weight aluminum construction Made In the USA **Note: Requires welding to install. Photos of installed baffle for reference.
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7624656
Part#: 116184
Ships in 3 Business Days
$ 230.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:20023486
Part#: 11137854463KT
Ships in 6 Business Days
$ 3,524.99 USD
Free Shipping on orders $49 and up
One major drawback of the N55 engine is the oil pump and pan design. While great for street driven vehicles, this design falls short when tracking your BMW. Due to the design of the N55 oil pan and pump, higher G-loads experienced when cornering can lead to oil starvation and pressure drop, potentially leading to bearing damage and more. By upgrading to the S55 oil pan and pump design that BMW utilizes in both their standard M4 and Motorsport M4 GT4 models, you can prevent the possibility of oil starvation! The dual pump design used on the S55 engine installs onto the N55 engine easily and without the need for any major modification to the stock block or windage tray. Thanks to the addition of a scavenging pump, oil pressure and delivery are maintained under all aggressive driving conditions, even when the oil supply is not consistent from the main oil pump.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:337964
Part#: 11131727974
In Stock at Vendor
Starting at $ 12.99 USD
Free Shipping on orders $49 and up
Starting at $ 12.99 USD
Free Shipping on orders $49 and up
E30 M3 Upper Oil-Pan Gasket. Have a leaky oil pan? It may be failed oil pan gaskets (either upper or lower). This is the UPPER oil pan gasket for the S14 and M10 engines. We offer this gasket in both cork and paper gasket media.
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7593106
Part#: 116182
Ships in 3 Business Days
$ 155.00 USD
Free Shipping on orders $49 and up
$ 155.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars.
Show More Show Less