click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart

Home

Categories

Specials

Gifts & Clothing

  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages

Brakes

  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers

Car Care & Accessories

  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion

Drivetrain

  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts

Engine Chips

  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management

Engine Parts

  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts

Exhaust

  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts

Exterior / Body

  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits

Intake

  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts

Interior

  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories

Lighting

  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs

Maintenance

  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids

Suspension

  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. Moton Coil Overs & Race Shocks
  12. ST Suspension Coilover Kits
  13. Turner Motorsport TrackSport Coil-Over Suspension Kits
  14. Turner Motorsport Racing Suspension Kits
  15. Chassis Reinforcement Kits & Parts
  16. Sway Bar Kits
  17. Sway Bar Links & Sway Bar Parts
  18. Camber / Caster Kits
  19. Strut Braces & Stress Bars
  20. Control Arm Replacements & Upgrades
  21. Suspension Bushings & Mounts
  22. Wheel Bearings & Hub Assemblies
  23. Steering Racks & Power Steering Pumps
  24. Tie Rods & Steering Parts
  25. Coil Over Spring Hardware

Wheels

  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. D Force Flow Formed Alloy Wheels
  6. Dinan Performance Wheels
  7. Original BMW Wheels and Wheel Upgrades
  8. Turner Motorsport Wheel Spacers
  9. H&R Wheel Spacers
  10. Wheel Bolts, Wheel Studs and Nuts
  11. Wheel Emblems, Caps, and Accessories

Tools

  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals

Clearance

Choose BMW

BMW 1 Series

  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+

BMW 2 Series

  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+

BMW 3 Series

  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+

BMW 4 Series

  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2014+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2014+
  7. (F36) 4-Series Gran Coupe 2014+
  8. (F33) 4-Series Convertible 2014+
  9. (F33) 4-Series Convertible 2014+
  10. (F36) 4-Series Gran Coupe 2014+
  11. (F36) 4-Series Gran Coupe 2014+

BMW 5 Series

  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+

BMW 6 Series

  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+

BMW 7 Series

  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+

BMW 8 Series

BMW Classics (E9, Bavaria, Isetta, etc)

  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978

BMW X Series (SAV)

  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)

BMW Z Series

  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003

BMW 1600-2002 / tii

BMW i Series

  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+

MINI Cooper and Cooper S

Racing

Racing Home

Racing News

Racing Schedule

Racing Photo Gallery

Gallery

Photo Gallery

Wallpaper

Project Cars

  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone

Video Gallery

Projects

Turner BMW i8

Turner BMW F80 M3

Turner BMW F82 M4

Turner BMW X5 M

Turner BMW F22 2 Series

Turner BMW F13 M6

Turner BMW F10 M5

Turner BMW F30 335i

Turner BMW E9X M3

Turner BMW E92 335i

Turner BMW E82 1 Series

Turner BMW ActiveE (100% Electric)

Turner BMW E46 M3

Turner BMW E46 330i ZHP

Turner BMW E36 M3

Turner BMW E30 M3

Turner MINI Cooper S

McLaren F1

Turner BMW E92 M3 Lime Rock

Turner BMW F80 M3 Silverstone

About Us

About Turner Motorsport

Customer Feedback

The Turner Team

Returns Policy

Shipping Info

Contact Us

Privacy Policy

Security Policy

FAQs

HRE FlowForm Performance Alloy Wheels

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price. FF01 wheels are available in 19" and 20" sizes that fit with the proper offsets. Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact. The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel.
For accurate results, specify your model below.
HRE FlowForm 18" Square Track Wheel Set
Fr: 18x10.0" ET25
Rr: 18x10.0" ET25

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. Now the FF15's sharp looks can be applied to a track wheel setup. 18x10" wheels are great for 275-295 tires which are available in many track and high performance tire compounds. Using a wide wheel/tire in the front will give more grip and reduce premature understeer. It's one of the keys to getting better handing on almost any BMW. These sizes and offsets run more aggressive than what is typically found on a street car but necessary to get as much rubber as possible to fit within the bodywork. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2001-2006 E46 BMW M3
2011 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
2015+ F80 BMW M3 - Sedan
2015+ F82 F83 BMW M4 - Coupe, Convertible
2015+ F87 BMW M2
Part #: TMS214352
Price: $2070.00 (USD) 
F30 335i / F32 435i HRE FlowForm 20" Wheels
Fr: 20x8.5" ET25 26.4lbs
Rr: 20x10.0" ET40 26.2lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
Part #: TMS338863
Price: $3200.00 (USD) 
E46 M3 HRE FlowForm 19" Wheels
Fr: 19x9.0" ET35
Rr: 19x10.0" ET25

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2001-2006 E46 BMW M3
Part #: TMS224311
Price: $2250.00 (USD) 
Free Shipping Free Shipping
F22, F3X HRE FlowForm 18" Square Track Wheel Set
Fr: 18x8.5" ET40
Rr: 18x8.5" ET40

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. Now the FF15's sharp looks can be applied to a track wheel setup. 18x8.5" wheels are great for 245-255 tires which are available in many track and high performance tire compounds. Using a wide wheel/tire in the front will give more grip and reduce premature understeer. It's one of the keys to getting better handing on almost any BMW. These sizes and offsets run more aggressive than what is typically found on a street car but necessary to get as much rubber as possible to fit within the bodywork. On the F22, more negative camber may be required depending on the tire choice (to clear the fender lip). The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2014+ F22 BMW 228i 230i M235i M240i
2012-2015 F30 BMW 320i 328i 330i 335i 340i - Sedan
2012-2016 F32 BMW 428i 430i 435i 440i - Coupe
2013-2016 F33 BMW 428i 430i 435i 440i - Convertible
2012-2015 F34 BMW 328i 330i 335i 340i - Gran Turismo
2012-2016 F36 BMW 428i 430i 435i 440i - GranCoupe
Part #: TMS224308
Price: $2070.00 (USD) 
Free Shipping Free Shipping

E9X 325i/328i/330i/335i RWD HRE FlowForm 19" Wheel Set
Fr: 19x9.0" ET35
Rr: 19x10.0" ET40

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Part #: E9XFF151890100
Price: $2250.00 (USD) 
Free Shipping Free Shipping
F34 328i/335xi GT HRE FlowForm 19" Wheels
Fr: 19x8.5" ET30
Rr: 19x10.0" ET40

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. Two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
Part #: TMS338854
Price: $3000.00 (USD) 
As used on the Turner M3/M4 Project Cars F80 M3 / F82 M4 HRE FlowForm 20" Wheels
Fr: 20x9.0" ET25 25.8lbs
Rr: 20x10.0" ET40 28.0lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
Part #: TMS212690
Price: $2434.00 (USD) 

E82 1-series, F22 2-series RWD HRE FlowForm 19" Wheel Set
Fr: 19x8.5" ET40
Rr: 19x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i
2014+ F22 F23 BMW 228i 230i M235i M240i

Part #: TMS340223
Price: $2250.00 (USD) 
Free Shipping Free Shipping

E82 1M, E9X M3 HRE FlowForm 20" Wheel Set
Fr: 20x9.0" ET25
Rr: 20x10.5" ET26

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2011 E82 E88 BMW 1M Coupe
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

Part #: E9XM3152085105
Price: $2430.00 (USD) 
E9X M3 HRE FlowForm 20" Wheels
Fr: 20x9.0" ET25 25.8lbs
Rr: 20x10.5" ET26 28.0lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2011-2011 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Part #: TMS212689
Price: $2430.00 (USD) 

F10 M5 HRE FlowForm 20" Wheels
Fr: 20x8.5" ET25 21.8lbs
Rr: 20x10.0" ET40 22.4lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2012+ F10 BMW M5

Part #: F10M5HREFF01-20
Price: $2430.00 (USD) 
E9X M3 HRE FlowForm 19" Wheels
Fr: 19x9.0" ET25 23.8lbs
Rr: 19x10.5" ET26 26.6lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2011-2011 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Part #: TMS212688
Price: $2500.00 (USD) 

F10 M5 HRE FlowForm 19" Wheels
Fr: 19x8.5" ET25 21.8lbs
Rr: 19x10.0" ET40 22.4lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2012+ F10 BMW M5

Part #: F10-M5-HRE-FF01-
Price: $2500.00 (USD) 
Free Shipping Free Shipping
F3X 328i/335i/428i/435i HRE FlowForm 19" Wheel Set
Fr: 19x8.5" ET30
Rr: 19x9.5" ET42

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
Part #: TMS338865
Price: $2750.00 (USD) 

F3X RWD HRE FlowForm 18" Wheel Set
Fr: 18x9.0" ET35
Rr: 18x9.0" ET35

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Fitment note: on E90/E92 models, a 3mm wheel spacer is required to clear the front strut. You can add Turner 3mm grey or black spacers to the wheel set from the options below.

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2012- F30 BMW 320i 328i 330i 335i 335i 340i - Sedan
2012- F32 BMW 428i 430i 435i 440i - Coupe
2013- F33 BMW 428i 430i 435i 440i - Convertible
2012- F34 BMW 328i 330i 335i 340i - Gran Turismo
2012- F36 BMW 428i 430i 435i 440i - GranCoupe

Part #: F3XFF15189035
Price: $2070.00 (USD) 
Free Shipping Free Shipping
E89 Z4 HRE FlowForm 20" Wheels
Fr: 20x8.5" ET25 26.4lbs
Rr: 20x10.0" ET40 26.2lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: E89-HRE-FF01-20-
Price: $2430.00 (USD) 
Quantity:   
F80 M3 / F82 M4 HRE FlowForm 20" Wheels
Fr: 20x9.0" ET25 25.8lbs
Rr: 20x10.0" ET40 28.0lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. Two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
Part #: FF15-M3M4-20
Price: $2430.00 (USD) 
E9X M3 HRE FlowForm 20" Wheels
Fr: 20x9.0" ET25 25.8lbs
Rr: 20x10.5" ET26 28.0lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2011-2011  E82 BMW  1M Coupe
2008-2011  E90 BMW  M3 - Sedan
2008-2013  E92 BMW  M3 - Coupe
2008-2013  E93 BMW  M3 - Convertible
Part #: E9X-M3-HRE-FF01-
Price: $2700.00 (USD) 

E36 HRE FlowForm 18" Wheels 
Fr: 18x8.5" ET40 24.8lbs 
Rr: 18x8.5" ET40 24.8lbs 

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price. 

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty. 

HRE FlowForm Wheel Features - 
+ state-of-the-art technology 
+ lighter and stronger than a cast wheel 
+ stimulating looks 
+ multiple color and finish options encourage personalization 
+ lifetime structural warranty 
+ TUV, VIA, and JWL approved 

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2003-2008 E85 E86 BMW Z4 2.5 Z4 3.0 Z4 3.0i Z4 3.0si

Part #: E36FF151885
Price: $2070.00 (USD) 
Free Shipping Free Shipping

F22 228i/230i/M235i/M240i RWD HRE FlowForm 18" Wheel Set
Fr: 18x8.5" ET40
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2014+ F22 F23 BMW 228i 230i M235i M240i

Part #: F22FF15188590
Price: $2070.00 (USD) 
Free Shipping Free Shipping

E9X RWD HRE FlowForm 18" Wheel Set
Fr: 18x9.0" ET35
Rr: 18x9.0" ET35

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Fitment note: on E90/E92 models, a 3mm wheel spacer is required to clear the front strut. You can add Turner 3mm grey or black spacers to the wheel set from the options below.

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Part #: E9XFF15189035
Price: $2070.00 (USD) 
Free Shipping Free Shipping

E46, E90/E92, Z4 HRE FlowForm 19" Mild Staggered Wheels
Fr: 19x8.5" ET30
Rr: 19x9.5" ET42

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Fitment note: the front wheels may require a small spacer to clear certain suspensions.

Colors and Finishes -
Standard Colors

Optional Colors (+$500)


This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi M3 - Sedan
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 328i 335i 335is M3 - Convertible
2003-2008 E85 E86 BMW Z4 2.5 Z4 3.0 Z4 3.0i Z4 3.0si

Part #: TMS340179
Price: $2250.00 (USD) 
Free Shipping Free Shipping

E82 1-series, F22 2-series RWD HRE FlowForm 18" Wheel Set
Fr: 18x8.5" ET40
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i
2014+ F22 F23 BMW 228i 230i M235i M240i

Part #: E82FF15188590
Price: $2070.00 (USD) 
Free Shipping Free Shipping
F30 335i / F32 435i HRE FlowForm 20" Wheels
Fr: 20x8.5" ET25 26.4lbs
Rr: 20x10.0" ET40 26.2lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
Part #: F3X-HRE-FF01-20-
Price: $2700.00 (USD) 
Quantity:   
E89 Z4 HRE FlowForm 19" Wheels
Fr: 19x8.5" ET30 24.8lbs
Rr: 19x10.0" ET40 24.4lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: E89-HRE-FF01-19-
Price: $2250.00 (USD) 
Quantity:   
F3X 328i/335i/428i/435i HRE FlowForm 20" Wheel Set
Fr: 20x8.5" ET30
Rr: 20x9.5" ET42

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
Part #: TMS338866
Price: $2930.00 (USD) 
F22 228i/M235i HRE FlowForm 19" Wheels
Fr: 19x8.5" ET40
Rr: 19x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2014+ F22 BMW 228i 228iX M235i M235iX
Part #: TMS338839
Price: $2750.00 (USD) 

E36 incl M3, E46 non-M3 RWD HRE FlowForm 18" Wheel Set
Fr: 18x9.0" ET44
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Part #: E36FF15189044
Price: $2070.00 (USD) 
Free Shipping Free Shipping

F06 640i/650i GC, F10 528i/535i/550i, F13 640i/650i HRE FlowForm 20" Wheels
Fr: 20x9.0" ET25
Rr: 20x10.0" ET40

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i
2012+ F06 BMW 640i 650i
2012+ F12 F13 BMW 640i 650i

Part #: TMS338829
Price: $2430.00 (USD) 
E46 M3 HRE FlowForm 18" Wheels
Fr: 18x9.0" ET35
Rr: 18x10.0" ET25

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available to. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2001-2006 E46 BMW M3
Part #: TMS212694
Price: $2070.00 (USD) 

E36 incl M3, E46 non-M3 RWD HRE FlowForm 18" Wheel Set
Fr: 18x8.5" ET40
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Part #: E36FF15188590
Price: $1943.00 (USD) 
Free Shipping Free Shipping

E82 1M, E9X M3 HRE FlowForm 19" Wheel Set
Fr: 19x9.0" ET25
Rr: 19x10.5" ET26

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2011 E82 E88 BMW 1M Coupe
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

Part #: E9XM3151985105
Price: $2250.00 (USD) 
Free Shipping Free Shipping
F34 328i/335xi GT HRE FlowForm 20" Wheels
Fr: 20x8.5" ET30
Rr: 20x10.0" ET40

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. Two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
Part #: TMS338855
Price: $3200.00 (USD) 
F30 335i / F32 435i HRE FlowForm 19" Wheels
Fr: 19x8.5" ET25 24.8lbs
Rr: 19x10.0" ET40 24.4lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
Part #: F3X-HRE-FF01-19-
Price: $2500.00 (USD) 
Quantity:   
F30 335i / F32 435i HRE FlowForm 19" Wheels
Fr: 19x8.5" ET25 24.8lbs
Rr: 19x10.0" ET40 24.4lbs

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors


Optional Colors (+$500)


This item fits the following BMWs:
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
Part #: TMS338862
Price: $3000.00 (USD) 

E9X 325i/328i/330i/335i RWD HRE FlowForm 18" Wheel Set
Fr: 18x9.0" ET35
Rr: 18x10.0" ET40

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Part #: TMS340265
Price: $2070.00 (USD) 
Free Shipping Free Shipping

F06 GC, F10 Sedan, F13 Coupe HRE FF15 19" Wheel Set
Fr: 19x9.0" ET25
Rr: 19x10.0" ET40

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i
2012+ F06 BMW 640i 650i
2012+ F12 F13 BMW 640i 650i

Part #: TMS338828
Price: $2250.00 (USD) 
Free Shipping Free Shipping
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.