Find Parts That Fit Your Vehicle

Sparta Evolution Big Brake Kits

Turner Motorsport is proud to offer you Sparta Evolution braking products! Known for Big Brake Kits, all Sparta Evolution calipers are forged aluminum, paired with 2-piece Pegasus Rotors - specifically engineered for your BMW, these BBKs will give your vehicle the braking performance and consistency you need whether you're on the track or commuting to work. Sparta invests the time to develop brake kits individually specifically for your BMW chassis, ensuring that while they are more than capable on the track, they are also DOT and TUV approved for the daily driver. Sparta BBKs also feature stainless steel braided lines and teflon coating for durability.

Sparta Evolution Rear Triton Big Brake Kit - E36 Non-M
Sparta Evolution - Corporate Logo
T#:552137
Part#: SPT.M1.3274
Direct Ship
Starting at $3,195.00
Starting at $3,195.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton Big Brake Kits were designed by Sparta Evolution to give you the best performance on and off of the track. Using their top of the line Forged Triton Calipers and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle, perfect for a track focused vehicle but still with decent street braking.

Included in this kit:

  • Triton Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The main focus of this kit, the Triton Forged Calipers, have been designed for track and heavy duty street use. They are constructed from high quality aluminum, in order to save weight while still providing extremely high strength, in an extremely precise forging process. This caliper features 4 pistons, for even pressure and greater clamping force, that are castellated in order to prevent heat transfer by reducing the total area of surface contact between the brake pad and pistons. The calipers also use a through bolt design to extend performance life and reduce material fatigue.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit includes 345mm rotors, a massive increase from the stock rotor size of 280mm

Fits the following BMWs:
1992-1999 E36 BMW Non-M

Sparta Evolution Triton R Front Big Brake Kit - E85/E86 Z4 M
Sparta Evolution - Corporate Logo
T#:552403
Part#: SPR.M1.3125
Direct Ship
Starting at $4,095.00
Starting at $4,095.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton R Big Brake Kits were designed by Sparta Evolution to give you the best performance possible on the track. Using their top of the line Forged Triton R Calipers, which weigh 15% lighter than typical Triton calipers and vent away heat much more efficiently, and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle.

Included in this kit:

  • Triton R Forged 6-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The Triton R 6-Piston calipers used in this kit were developed with the track in mind. Designed to be 15% lighter than the standard Triton design, the Triton R is one of the lightest most powerful calipers available, meticulously engineered to provide the absolute best braking performance.

Caliper Features:

  • Forged from aluminum for strength and weight savings.
  • Designed with a larger frame for efficient ventilation.
  • Utilize a standard FMSI pad shape so youaEURtmre not restricted in your pad choices.
  • Type II anodized finish is tougher and more efficiently dissipates heat from the caliper body vs powder coating or paint.
  • Quick release pad retainer pins expedite pad changes.
  • 15% lighter than standard Triton caliper

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit features 355mm rotor, a 10mm increase in diameter over the stock 345mm rotor size.

Fits the following BMWs:
2006-2008 E85/86 BMW Z4 M Coupe, M Roadster

Sparta Evolution Front Triton Big Brake Kit - E36 M3
Sparta Evolution - Corporate Logo
T#:552237
Part#: SPT.M1.3172
Direct Ship
Starting at $3,295.00
Starting at $3,295.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton Big Brake Kits were designed by Sparta Evolution to give you the best performance on and off of the track. Using their top of the line Forged Triton Calipers and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle, perfect for a track focused vehicle but still with decent street braking.

Included in this kit:

  • Triton Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The main focus of this kit, the Triton Forged Calipers, have been designed for track and heavy duty street use. They are constructed from high quality aluminum, in order to save weight while still providing extremely high strength, in an extremely precise forging process. This caliper features 4 pistons, for even pressure and greater clamping force, that are castellated in order to prevent heat transfer by reducing the total area of surface contact between the brake pad and pistons. The calipers also use a through bolt design to extend performance life and reduce material fatigue.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit includes 355mm rotors, a massive increase from the stock rotor size of 315mm.

Fits the following BMWs:
1995-1999 E36 BMW M3


Sparta Evolution Triton R Rear Big Brake Kit - F8X M2 M3 M4
Sparta Evolution - Corporate Logo
T#:552428
Part#: SPR.M1.9212
Direct Ship
Starting at $3,795.00
Starting at $3,795.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton R Big Brake Kits were designed by Sparta Evolution to give you the best performance possible on the track. Using their top of the line Forged Triton R Calipers, which weigh 15% lighter than typical Triton calipers and vent away heat much more efficiently, and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle.

Included in this kit:

  • Triton R Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The Triton R 4-Piston calipers used in this kit were developed with the track in mind. Designed to be 15% lighter than the standard Triton design, the Triton R is one of the lightest most powerful calipers available, meticulously engineered to provide the absolute best braking performance.

Caliper Features:

  • Forged from aluminum for strength and weight savings.
  • Designed with a larger frame for efficient ventilation.
  • Utilize a standard FMSI pad shape so youaEURtmre not restricted in your pad choices.
  • Type II anodized finish is tougher and more efficiently dissipates heat from the caliper body vs powder coating or paint.
  • Quick release pad retainer pins expedite pad changes.
  • 15% lighter than standard Triton caliper

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit features 380mm rotors, a slight increase over the 370mm stock rotors.

Fits the following BMWs:
2014+ F8X BMW M2 M3 M4


Sparta Evolution Rear Triton Big Brake Kit - E8X 128i 135i
Sparta Evolution - Corporate Logo
T#:552277
Part#: SPT.M1.3176
Direct Ship
Starting at $3,195.00
Starting at $3,195.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton Big Brake Kits were designed by Sparta Evolution to give you the best performance on and off of the track. Using their top of the line Forged Triton Calipers and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle, perfect for a track focused vehicle but still with decent street braking.

Included in this kit:

  • Triton Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The main focus of this kit, the Triton Forged Calipers, have been designed for track and heavy duty street use. They are constructed from high quality aluminum, in order to save weight while still providing extremely high strength, in an extremely precise forging process. This caliper features 4 pistons, for even pressure and greater clamping force, that are castellated in order to prevent heat transfer by reducing the total area of surface contact between the brake pad and pistons. The calipers also use a through bolt design to extend performance life and reduce material fatigue.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit features 345mm rotors, a massive increase over the 128i's stock rotor size of 300mm and the 135i's stock rotor size of 324mm.

Fits the following BMWs:
2008-2013 E82/88 BMW 128i 135i

Sparta Evolution Rear Triton Big Brake Kit - E9X 328i 330i 335i, F30 328i 330i 335i
Sparta Evolution - Corporate Logo
T#:552359
Part#: SPT.M1.3171
Direct Ship
Starting at $3,195.00
Starting at $3,195.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton Big Brake Kits were designed by Sparta Evolution to give you the best performance on and off of the track. Using their top of the line Forged Triton Calipers and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle, perfect for a track focused vehicle but still with decent street braking.

Included in this kit:

  • Triton Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The main focus of this kit, the Triton Forged Calipers, have been designed for track and heavy duty street use. They are constructed from high quality aluminum, in order to save weight while still providing extremely high strength, in an extremely precise forging process. This caliper features 4 pistons, for even pressure and greater clamping force, that are castellated in order to prevent heat transfer by reducing the total area of surface contact between the brake pad and pistons. The calipers also use a through bolt design to extend performance life and reduce material fatigue.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit features 345mm rotors, a slight increase over the stock E9X and F30 300mm rotor diameter.

Fits the following BMWs:
2006-2012 E9X BMW 328i 330i 335i/is
2012+ F30 BMW 328i 330i 335i


Sparta Evolution Rear Triton Big Brake Kit - E89 Z4
Sparta Evolution - Corporate Logo
T#:552337
Part#: SPT.M1.3126
Direct Ship
Starting at $3,195.00
Starting at $3,195.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton Big Brake Kits were designed by Sparta Evolution to give you the best performance on and off of the track. Using their top of the line Forged Triton Calipers and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle, perfect for a track focused vehicle but still with decent street braking.

Included in this kit:

  • Triton Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The main focus of this kit, the Triton Forged Calipers, have been designed for track and heavy duty street use. They are constructed from high quality aluminum, in order to save weight while still providing extremely high strength, in an extremely precise forging process. This caliper features 4 pistons, for even pressure and greater clamping force, that are castellated in order to prevent heat transfer by reducing the total area of surface contact between the brake pad and pistons. The calipers also use a through bolt design to extend performance life and reduce material fatigue.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

* This kit features 345mm rotor, a 45mm increase in diameter over the stock 300mm rotor size.

Fits the following BMWs:
2008-2016 E89 BMW Z4

Sparta Evolution Triton R Front Big Brake Kit - F8X M2 M3 M4
Sparta Evolution - Corporate Logo
T#:552433
Part#: SPR.M1.9211
Direct Ship
Starting at $4,495.00
Starting at $4,495.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton R Big Brake Kits were designed by Sparta Evolution to give you the best performance possible on the track. Using their top of the line Forged Triton R Calipers, which weigh 15% lighter than typical Triton calipers and vent away heat much more efficiently, and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle.

Included in this kit:

  • Triton R Forged 6-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The Triton R 6-Piston calipers used in this kit were developed with the track in mind. Designed to be 15% lighter than the standard Triton design, the Triton R is one of the lightest most powerful calipers available, meticulously engineered to provide the absolute best braking performance.

Caliper Features:

  • Forged from aluminum for strength and weight savings.
  • Designed with a larger frame for efficient ventilation.
  • Utilize a standard FMSI pad shape so youaEURtmre not restricted in your pad choices.
  • Type II anodized finish is tougher and more efficiently dissipates heat from the caliper body vs powder coating or paint.
  • Quick release pad retainer pins expedite pad changes.
  • 15% lighter than standard Triton caliper

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit features 380mm rotors, the same size as the stock BMW rotors.

Fits the following BMWs:
2014+ F8X BMW M2 M3 M4


Sparta Evolution Triton R Rear Big Brake Kit - E85/E86 Z4 M
Sparta Evolution - Corporate Logo
T#:552408
Part#: SPR.M1.3126
Direct Ship
Starting at $3,295.00
Starting at $3,295.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton R Big Brake Kits were designed by Sparta Evolution to give you the best performance possible on the track. Using their top of the line Forged Triton R Calipers, which weigh 15% lighter than typical Triton calipers and vent away heat much more efficiently, and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle.

Included in this kit:

  • Triton R Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The Triton R 4-Piston calipers used in this kit were developed with the track in mind. Designed to be 15% lighter than the standard Triton design, the Triton R is one of the lightest most powerful calipers available, meticulously engineered to provide the absolute best braking performance.

Caliper Features:

  • Forged from aluminum for strength and weight savings.
  • Designed with a larger frame for efficient ventilation.
  • Utilize a standard FMSI pad shape so youaEURtmre not restricted in your pad choices.
  • Type II anodized finish is tougher and more efficiently dissipates heat from the caliper body vs powder coating or paint.
  • Quick release pad retainer pins expedite pad changes.
  • 15% lighter than standard Triton caliper

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*This kit features 345mm rotor, a 17mm increase in diameter over the stock 328mm rotor size.

Fits the following BMWs:
2006-2008 E85/86 BMW Z4 M Coupe, M Roadster


Sparta Evolution Rear Triton Big Brake Kit - E46 330i
Sparta Evolution - Corporate Logo
T#:552327
Part#: SPT.M1.3144
Direct Ship
Starting at $3,295.00
Starting at $3,295.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton Big Brake Kits were designed by Sparta Evolution to give you the best performance on and off of the track. Using their top of the line Forged Triton Calipers and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle, perfect for a track focused vehicle but still with decent street braking.

Included in this kit:

  • Triton Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The main focus of this kit, the Triton Forged Calipers, have been designed for track and heavy duty street use. They are constructed from high quality aluminum, in order to save weight while still providing extremely high strength, in an extremely precise forging process. This caliper features 4 pistons, for even pressure and greater clamping force, that are castellated in order to prevent heat transfer by reducing the total area of surface contact between the brake pad and pistons. The calipers also use a through bolt design to extend performance life and reduce material fatigue.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

* This kit features 330mm rotor, a 10mm increase in diameter over the stock 320mm rotor size.

Fits the following BMWs:
2001-2006 E46 BMW 330i

Sparta Evolution Saturn Rear Big Brake Kit - E82 E88 128i
Sparta Evolution - Corporate Logo
T#:551908
Part#: SPS.M1.3176
Direct Ship
Starting at $1,845.00
Starting at $1,845.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

At Sparta Evolution's lowest cost level is their Saturn BBK. This kit is perfect for someone who wants an aggressive kit for the streets and the occasional weekend at the track. Perfect for someone who wants extreme performance, without breaking the bank. Included with every Saturn Big Brake Kit are S-Grooved 2-Piece rotors, forged Saturn calipers, and brake pads formulated for spirited street driving and track events. Thanks to this kit's great balance of sport and light duty track capabilities, it has become one of the top picks for braking in the performance automotive community.

Included in this kit:

  • Saturn Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

Saturn forged calipers have been designed for sporty street use and occasional track performance. They are constructed from high quality aluminum in order to save weight while still providing extremely high strength. Each caliper has 4 pistons, two on each side of the caliper, for even pressure and greater clamping force.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

*This kit features 345mm rotors, a massive increase over the 128i's stock rotor size of 300mm and the 135i's stock rotor size of 324mm.

Fits the following BMWs:
2007-2013 E82/88 BMW 128i

Sparta Evolution Front Triton Big Brake Kit - E36 Non-M
Sparta Evolution - Corporate Logo
T#:552165
Part#: SPT.M1.327
Direct Ship
Starting at $3,195.00
Starting at $3,195.00

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Triton Big Brake Kits were designed by Sparta Evolution to give you the best performance on and off of the track. Using their top of the line Forged Triton Calipers and S-Grooved 2 -Piece rotors, this kit greatly increases the stopping power of your vehicle, perfect for a track focused vehicle but still with decent street braking.

Included in this kit:

  • Triton Forged 4-Piston Calipers
  • Pegasus S-Groove 2-Piece Rotors
  • Sparta Evolution Brake Lines
  • Sparta Evolution Brake Pads
  • Caliper Brackets with Mounting Hardware
  • Installation Instruction Manual
  • Warranty Info

The main focus of this kit, the Triton Forged Calipers, have been designed for track and heavy duty street use. They are constructed from high quality aluminum, in order to save weight while still providing extremely high strength, in an extremely precise forging process. This caliper features 4 pistons, for even pressure and greater clamping force, that are castellated in order to prevent heat transfer by reducing the total area of surface contact between the brake pad and pistons. The calipers also use a through bolt design to extend performance life and reduce material fatigue.

Pegasus S-Groove 2-Piece Rotors have been built for longevity and predictable braking. The surface of these rotors feature 10 "S-slot" grooves that provide brake pad contact with a leading edge, providing a fresh friction surface, a consistent pedal feel, and even pad wear. These grooves also provide the benefit of making these rotors perfect for all weather conditions.

The included brake pads are Sparta Evolution's own SPP 1.5. SPP 1.5 is a performance pad designed with high initial bite in a low temperature range, making it more appropriate for street use. Being designed for the spirited driver, this pad is more than capable of handling your daily commute as well as a spirited weekend drive that will require more performance characteristic from your OEM pads. SPP 1.5 offers a true feel of brake modulation in wet and cold conditions, just as it does in dry conditions.

Key Brake Pad Features:

  • Optimized for Low Noise
  • Similar to OEM Pad Characteristics
  • Low Intial Operating Temperature
  • Wide Working Temperature Range (up to 400AdegC)
  • Au=~0.39-0.45

Additionally, every kit includes DOT and TUV approved upgraded Stainless Steel Braided Brake Lines, coated with Teflon for wear protection, and all needed brackets and hardware for fitment and installation. This makes upgrading your rotors no more complicated than a typical fluid bleeding and standard brake change.

In the options below, you can select one of many coating options that give these calipers a great look and make them stand out. The first option is Powder Coating, which is found on most brake kits available today. The other two options are a Nickel Alloy Coating and an Anodized Coating. These give the calipers a significantly better appearance, resist higher temperatures than normal paint and powder coating, and offers better scratch resistance. In addition, these coatings are much thinner, offering tighter and more precise tolerances.

*There are two sizes of Big Brake Kit to choose from, 330mm and 355mm. Both sizes are a massive increase from their stock rotor size of 286mm and are even large than the OE BBK upgrade of 325mm. 330mm is best chosen for vehicles that will see both street and track use. 355mm is best chosen for vehicles that will see mostly track use.

Fits the following BMWs:
1992-1999 E36 BMW Non-M



Sparta Evolution Rear Triton Big Brake Kit - E36 M3
Sparta Evolution - Corporate Logo
T#:552215
Part#: SPT.M1.3112
Direct Ship
Starting at $3,195.00
Starting at $3,195.00