Find Parts That Fit Your Vehicle

Fire Extinguishers & Mounts


Brey Krause OE seat Fire Extinguisher Mount - Priced each
Brey-Krause - Corporate Logo
T#:396504
Part#: R-2225
In Stock
$89.25
Free Shipping on orders $99 and up
The Brey Krause R-2225 Fire Extinguisher Mount attaches to the factory seats provides a mount location for either an Amerex style 2.5 lb fire extinguisher bottle, Brey-Krause Quick Release Bottle Mounts, or the factory BMW fire extinguisher bottle/bracket. The bottle is mounted at the front of the seat, where it is close at hand but not in the way. This Mount attaches to the seat itself and moves with the seat so it will not interfere with leg room no matter the seat position.
H3R Performance HalGuarda,,C/ Clean Agent 2.5lb Fire Extinguisher - Black
H3R Performance - Corporate Logo
T#:402686
Part#: HG250B
In Stock
$224.95
Free Shipping

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The HalGuarda,,C/ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain HalotronA(r) 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

Features:

  • No thermal shock to electronics
  • No mess or damage to vehicle or surfaces
  • Liquefied gas extinguishes hard-to-reach fires
  • Does not impair operator's vision
  • EPA approved
  • Listed and rated 2B:C by Underwriters Laboratories
  • Rechargeable
  • Made in U.S.A.
  • 2-strap mounting bracket
  • 6' - 10' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Compact, lightweight, easy to use
  • Five year limited warranty

Specifications:

  • Extinguishing Agent -- HalotronA(r) 1
  • Agent (lb.) -- 2.5
  • Gross Weight (lb.) -- 5.4
  • U/L Rating -- 2 B:C
  • Height (inches) -- 14.8
  • Width (inches) -- 5.0
  • Depth-diameter (inches) -- 3.0
Rennline Silver EZ Adjust Fire Extinguisher Mount
Rennline - Corporate Logo
T#:554634
Part#: FE1317SILVER
Direct Ship
$145.00
$145.00
Unlike many extinguisher mount on the market the EZ Adjust uses a two-piece design that allows you to remove all visible components in seconds to revert to a factory look. While other rail mount systems are fixed and limit your seat travel, the EZ-Adjust Slider allows you retain full seat adjustment range.

Brey Krause OE seat Fire Extinguisher Mount - priced each
Brey-Krause - Corporate Logo
T#:396505
Part#: R-2216
Ships in 3 Business Days
$89.25
$89.25
Allows mounting of 2.5lbs extinguisher bottle to factory power seats.

Brey-Krause Fire Extinguisher Mount Adapter
Brey-Krause - Corporate Logo
T#:396273
Part#: R-9502
Ships in 3 Business Days
$36.75
$36.75
Allows use of Brey-Krause mounting bracket with other brand extinguisher mounts.
Brey Krause Variable width Fire Extinguisher Mount
Brey-Krause - Corporate Logo
T#:396501
Part#: R-2295
Ships in 3 Business Days
$89.25
Free Shipping on orders $99 and up

Allows mounting of any variable width extinguisher mount, for use with seats 380-440mm wide

For use with R-924X, R-925X, R-926X, R-928X Series side mounts


OE Seat Fire Extinguisher Mount - priced each
Brey-Krause - Corporate Logo
T#:396506
Part#: R-2215
Ships in 3 Business Days
$89.25
Free Shipping on orders $99 and up
Allows mounting of 2.5lbs extinguisher bottle to factory manual seats.
Brey-Krause Quick Release Mount Bracket
Brey-Krause - Corporate Logo
T#:396271
Part#: R-9520-BRK
Ships in 3 Business Days
$42.00
Free Shipping on orders $99 and up
Replacement bracket for quick release fire extinguisher mounts, can be used to as a extra mount for switching the extinguisher between cars.

Brey-Krause Quick Release Fire Extinguisher Mount - 3"
Brey-Krause - Corporate Logo
T#:396272
Part#: R-9520
Ships in 3 Business Days
$241.50
Free Shipping

The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware.

Mount holds any 3" fire extinguisher


Brey-Krause Quick Release Fire Extinguisher Mount - 88mm
Brey-Krause - Corporate Logo
T#:396270
Part#: R-9528
Ships in 3 Business Days
$241.50
$241.50

The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware.

Mount holds any 88mm fire extinguisher

Brey-Krause Quick Release Fire Extinguisher Mount - 90mm
Brey-Krause - Corporate Logo
T#:396269
Part#: R-9530
Ships in 3 Business Days
$241.50
$241.50

The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware.

Mount holds any 90mm fire extinguisher

Select Vehicle

Category

  • Fire Extinguishers & Mounts

Price

$
$