51-12392 - aFe Magnum FORCE Stage-2 Pro DRY S Cold Air Intake System - E36 323/325/328/M3
aFe Magnum FORCE Stage-2 Pro DRY S Cold Air Intake System - E36 323/325/328/M3
E36 323/325/328/M3 intake with US 3.0" HFM E36 M3 intake with Euro 3.5" HFM Pro Dry S filter for maxiumum flow with a paper material
This air intake system produces up to 15 horsepower, 20 lbs. x ft. torque and out-flows the factory intake by up to 80%. Included in this system is a "oil free" conical air filter that uses three layers of progressive weave synthetic media for maximum convenience. The filter is constructed with 100% polyurethane for long life. This intake system also features a rotomolded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.
5 Tall Conical Pro Dry S Air Filter: This intake utilizes a huge, 5" tall conical Pro Dry S performance air filter for increased performance. This 3-layer progressive, synthetic material air filter requires no oils and cleans with water and a brush for maximum convenience.
One-piece precision cut heat shield: The air filter is housed in a one-piece, black powdercoated 1.6mm heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation.
Compatible with most aftermarket HIDs: This system was designed to clear larger style HID headlight housings.
One kit to Fit Both US and Euro HFMs: aFe has re-engineered their systems so that the same kit is used for either the US or Euro HFM. The filter and tubing was optimized for use with the 3.5" HFM and a special adapter was engineered to work with the stock 3.0" HFM. This is a bonus for cars with the stock HFM as they get the larger filter and intake tract! Note: on cars with a 3.5" HFM an adapter is required to fit the HFM to the stock throttle body boot. Select this from the options below. If you are removing the factory ASC traction control we recommend getting the Samco Silicone Intake Boot. Select this from the options below.
Please note: If you are planning to use a 3.5" HFM on your 1995 M3, be SURE you are using the correct software and fuel injectors.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This item fits the following BMWs: 1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1995-1999 E36 BMW M3 with Euro/540 or Porsche 3.5" HFM
E36 323/325/328/M3 intake with US 3.0" HFM E36 M3 intake with Euro 3.5" HFM Pro Dry S filter for maxiumum flow with a paper material
This air intake system produces up to 15 horsepower, 20 lbs. x ft. torque and out-flows the factory intake by up to 80%. Included in this system is a "oil free" conical air filter that uses three layers of progressive weave synthetic media for maximum convenience. The filter is constructed with 100% polyurethane for long life. This intake system also features a rotomolded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.
5 Tall Conical Pro Dry S Air Filter: This intake utilizes a huge, 5" tall conical Pro Dry S performance air filter for increased performance. This 3-layer progressive, synthetic material air filter requires no oils and cleans with water and a brush for maximum convenience.
One-piece precision cut heat shield: The air filter is housed in a one-piece, black powdercoated 1.6mm heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation.
Compatible with most aftermarket HIDs: This system was designed to clear larger style HID headlight housings.
One kit to Fit Both US and Euro HFMs: aFe has re-engineered their systems so that the same kit is used for either the US or Euro HFM. The filter and tubing was optimized for use with the 3.5" HFM and a special adapter was engineered to work with the stock 3.0" HFM. This is a bonus for cars with the stock HFM as they get the larger filter and intake tract! Note: on cars with a 3.5" HFM an adapter is required to fit the HFM to the stock throttle body boot. Select this from the options below. If you are removing the factory ASC traction control we recommend getting the Samco Silicone Intake Boot. Select this from the options below.
Please note: If you are planning to use a 3.5" HFM on your 1995 M3, be SURE you are using the correct software and fuel injectors.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This item fits the following BMWs: 1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1995-1999 E36 BMW M3 with Euro/540 or Porsche 3.5" HFM
Reviews
Product Q&A
Fits These Cars
MAKE
MODEL
SUBMODEL
ENGINE
BMW
E36
323ic
M52 2.5L
BMW
E36
323is
M52 2.5L
BMW
E36
325i
M50 2.5L
BMW
E36
325ic
M50 2.5L
BMW
E36
325is
M50 2.5L
BMW
E36
328i
M52 2.8L
BMW
E36
328ic
M52 2.8L
BMW
E36
328is
M52 2.8L
BMW
E36
M3
S50 3.0L
BMW
E36
M3
S52 3.2L
*The above product applications have been written by Turner Motorsport. All
warranties, product application, fitment, and performance are the responsibility of Turner Motorsport.
For additional information see the terms of use.