Performance Valved Axle-Back Exhaust & Milled Finish Skid Plate - F87 M2 Competition
F87 M2 Competition Valved Axle-Back Exhaust
Presenting the Turner Motorsport Performance Axle-Back Exhaust, tailor-made for your M2 Comp. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your S55-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F87.
Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that not only amplify the motorsport essence of the M2 but also replaces the inconspicuous stock exhaust tips. Elevate your driving encounters with the Turner Motorsport axle-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.
Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the S55. Leveraging the factory valve control, the Turner axle-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25 & 1.5mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.
Designed with the customer in mind, you are supplied with instructions to help make the installation is a DIY friendly. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your M2 Comp with the Turner Motorsport axle-back and let every drive become a statement of power and style.
Upgrading the sound:
This exhaust allows you to turn up the volume and let the S55 roar a hearty exhaust tone. Let's be honest, what's the point of owning an S55 if you're not going to upgrade the exhaust? Turner's signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of twin-turbo S55 sound!
Features and Benefits:
Street/Motorsport inspiration Controlled by factory valves Compatible with factory mid-pipes Quad exit with pronounced exhaust tips 17 lb weight reduction (Factory - 58lbs, Turner 41lbs) Kit Contents:
Dual 2.5" free-flowing mid-pipe adapters Valved Rear muffler 2 - Valve extension harness Clamps and Hardware for an OEM+ install Optional 4.0" Exhaust Tips Part Design:
Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25 & 1.5mm wall thickness, back purged and TIG-welded throughout Dual 2.5" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment. Strategically placed slip joints provide the most adjustability to obtain perfect fitment Turner Motorsport F87 Skid Plate - Milled Finish
The F87 M2 Competition & M2 CS models are simply amazing to drive; don't let road debris keep you from enjoying the moment. These cars have so much packed under the hood to get you this experience it causes the oil cooler to be placed face-down to the road. This makes the cooler an easy target for impact, which can prove catastrophic as the stock belly pan is designed from a flexible plastic material. We've heard stories of small branches, scrap pieces that fell from trucks to large ice chunks impact the cooler immediately draining the car of its oil. If you don't catch this right away this could cause serious internal engine damage due to oil starvation.
Turner's in-house engineering designed a skid plate to protect your oil cooler from these unfortunate situations while maintaining factory aerodynamics and fitment. The idea was to design something much stronger yet that still keeps the weight to a minimum. The Turner skid plate weighs slightly more than the plastic OE piece, making the Turner plate the lightest metal option on the market. This skid plate requires no modification and mounts using the existing factory hardware. Using a trim seal to press against the oil cooler allows the airflow to pull heat from the cooler the same way the OE belly pan was designed.
Features:
No cutting, drilling, or modification required 1/8” 5052 Aluminum skid plate construction. 10 Ga 5052 Aluminum side pieces to save weight. Increased ground clearance. Integrated frame-mounted support bracket for maximum strength. Included bulb seal maintains oil cooler efficiency. Retains factory air duct for oil cooler. Maintains wheel liner mounting positions.
Please ensure your correct model is selected
Does NOT fit your Change Vehicle
Fits your Change Vehicle
This product was last offered at the strikethrough price on
05-05-2026
Lifetime Replacement Program! Read more here
Product Details
F87 M2 Competition Valved Axle-Back Exhaust
Presenting the Turner Motorsport Performance Axle-Back Exhaust, tailor-made for your M2 Comp. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your S55-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F87.
Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that not only amplify the motorsport essence of the M2 but also replaces the inconspicuous stock exhaust tips. Elevate your driving encounters with the Turner Motorsport axle-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.
Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the S55. Leveraging the factory valve control, the Turner axle-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25 & 1.5mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.
Designed with the customer in mind, you are supplied with instructions to help make the installation is a DIY friendly. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your M2 Comp with the Turner Motorsport axle-back and let every drive become a statement of power and style.
Upgrading the sound:
This exhaust allows you to turn up the volume and let the S55 roar a hearty exhaust tone. Let's be honest, what's the point of owning an S55 if you're not going to upgrade the exhaust? Turner's signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of twin-turbo S55 sound!
Features and Benefits:
- Street/Motorsport inspiration
- Controlled by factory valves
- Compatible with factory mid-pipes
- Quad exit with pronounced exhaust tips
- 17 lb weight reduction (Factory - 58lbs, Turner 41lbs)
Kit Contents:
- Dual 2.5" free-flowing mid-pipe adapters
- Valved Rear muffler
- 2 - Valve extension harness
- Clamps and Hardware for an OEM+ install
- Optional 4.0" Exhaust Tips
Part Design:
- Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
- T304 Stainless Material in a natural finish - 1.25 & 1.5mm wall thickness, back purged and TIG-welded throughout
- Dual 2.5" Stainless Steel Mandrel Bent Tubing
- T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.
- Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Turner Motorsport F87 Skid Plate - Milled Finish
The F87 M2 Competition & M2 CS models are simply amazing to drive; don't let road debris keep you from enjoying the moment. These cars have so much packed under the hood to get you this experience it causes the oil cooler to be placed face-down to the road. This makes the cooler an easy target for impact, which can prove catastrophic as the stock belly pan is designed from a flexible plastic material. We've heard stories of small branches, scrap pieces that fell from trucks to large ice chunks impact the cooler immediately draining the car of its oil. If you don't catch this right away this could cause serious internal engine damage due to oil starvation.
Turner's in-house engineering designed a skid plate to protect your oil cooler from these unfortunate situations while maintaining factory aerodynamics and fitment. The idea was to design something much stronger yet that still keeps the weight to a minimum. The Turner skid plate weighs slightly more than the plastic OE piece, making the Turner plate the lightest metal option on the market. This skid plate requires no modification and mounts using the existing factory hardware. Using a trim seal to press against the oil cooler allows the airflow to pull heat from the cooler the same way the OE belly pan was designed.
Features:
- No cutting, drilling, or modification required
- 1/8” 5052 Aluminum skid plate construction.
- 10 Ga 5052 Aluminum side pieces to save weight.
- Increased ground clearance.
- Integrated frame-mounted support bracket for maximum strength.
- Included bulb seal maintains oil cooler efficiency.
- Retains factory air duct for oil cooler.
- Maintains wheel liner mounting positions.
Prop 65 Warning
