K&P Engineering K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S50 S52 S54 S21

K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S50 S52 S54

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • 7 times the flow of comparable paper oil filters
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • No more cutting apart messy paper filters for trapped debris inspection
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.
Watch to learn how to clean a K&P oil filter

This product fits the following BMWs:
1995 - 1999 E36 M3
2001 - 2006 E46 M3
1998 - 2002 E36/8 Z3 M Coupe
1998 - 2002 E36/7 Z3 M Roadster
2006 - 2008 E86 Z4 M Coupe
2006 - 2008 E85 Z4 M Roadster

K&P Engineering K&P Engineering
T#: 402540 | Part#: S21
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Checking Vehicle Fitment...

Please ensure your correct model is selected

Does NOT fit your Change Vehicle

Fits your Change Vehicle

Change Vehicle

99.00 $99.00
Free Shipping
Availability:
Available from Supplier
Est. Ship Date:
Ships in 5 Business Days
Qty
Add to Wish List
Facebook Twitter Pinterest Google+ Email Price Alert
K&P Engineering K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S50 S52 S54 S21
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S50 S52 S54
$99.00

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • 7 times the flow of comparable paper oil filters
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • No more cutting apart messy paper filters for trapped debris inspection
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

Watch to learn how to clean a K&P oil filter

This product fits the following BMWs:
1995 - 1999 E36 M3
2001 - 2006 E46 M3
1998 - 2002 E36/8 Z3 M Coupe
1998 - 2002 E36/7 Z3 M Roadster
2006 - 2008 E86 Z4 M Coupe
2006 - 2008 E85 Z4 M Roadster

Prop 65 WarningProp 65 Warning

Cross Reference
  • 11427833769

Product Q&A

Lifetime Replacement

This product is not eligible for Lifetime Replacement
MAKE MODEL SUBMODEL ENGINE Special Fitment Notes
BMW E36 M3 S50 3.0L Use vehicle selector to confirm fitment
BMW E36 M3 S52 3.2L Use vehicle selector to confirm fitment
BMW E46 M3 S54 3.2L Use vehicle selector to confirm fitment
BMW Z3 M Coupe S52 3.2L Use vehicle selector to confirm fitment
BMW Z3 M Roadster S52 3.2L Use vehicle selector to confirm fitment
BMW Z3 M Coupe S54 3.2L Use vehicle selector to confirm fitment
BMW Z3 M Roadster S54 3.2L Use vehicle selector to confirm fitment
BMW Z4 M Coupe S54 3.2L Use vehicle selector to confirm fitment
BMW Z4 M Roadster S54 3.2L Use vehicle selector to confirm fitment
*The above product applications have been written by Turner Motorsport. All warranties, product application, fitment, and performance are the responsibility of Turner Motorsport. For additional information see the terms of use.

Frequently Purchased Together

‹ ›