Schwaben for BMW E10 2002tii M15 2.0L

Clear BMW chassis

Schwaben 11mm Brake Bleeder Wrench
Schwaben - Corporate Logo
T#:362403
Part#: 000550SCH01A
In Stock
$20.95
Free Shipping on orders $99 and up
Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.
Turner Magnetic Fender Cover
Schwaben - Corporate Logo
T#:390157
Part#: 019744TMS01A
In Stock
$29.95
Free Shipping on orders $99 and up

Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.

 

Features:

  • Durable synthetic leather with the Turner logo
  • Soft goose flannelette backing
  • Four 9.5" integrated magnets

 

Dimensions:

  •  Extra Long 20" x 47"
Schwaben 3-Liter European Pressure Brake Bleeder
Schwaben - Corporate Logo
T#:363245
Part#: 007237SCH01A
In Stock
$54.95
Free Shipping on orders $99 and up

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

 

Features:

  • Holds a full 3-Liters ( 3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting
  • Do not  exceed 20 PSI
  • One-year warranty

Schwaben Water Pump Pulley Holder for Removal of Fan Clutch
Schwaben - Corporate Logo
T#:362357
Part#: 001170SCH01A
In Stock
$25.95
Free Shipping on orders $99 and up
Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.

Schwaben 3-Liter Premium European Brake Bleeder
Schwaben - Corporate Logo
T#:387031
Part#: 007237SCH01AKTKT
In Stock
$60.54
Free Shipping on orders $99 and up

This Premium European Brake bleeder features a Heavy-Duty aluminum master cylinder cap adapter for extra long life. Complete with the Schwaben quick couple fitting that can be used on most European cars.

Holds a full 3-Liters ( 3.17 qts) of brake fluid. Easy to read 0-30 lbs pressure gauge built into the tank top. The filling cap features a pressure relief valve for safe release of pressure. A full 40" hose with detachable swivel fitting at tank, allowing for complete disassembly and quick easy cleanup.There is a quality chrome quick coupler on master cylinder end of hose that snaps into master cylinder cap. This feature will allow you to disconnect hose from screw on cap without spilling a drop of fluid.  Recommended  working pressure of 10 PSI.

Extra plastic cap also included.

Schwaben Long-Reach 32mm Open End Fan Clutch Wrench
Schwaben - Corporate Logo
T#:378938
Part#: 007701SCH01A
In Stock
$24.95
Free Shipping on orders $99 and up
This tool was specifically designed for the tight clearances needed to remove most BMW fan clutches. Its slim design lets it fit into tight areas, and the extra-long length is ideal for fan shroud clearance. 

Schwaben Protecta Socket Kit - 3 Pieces
Schwaben - Corporate Logo
T#:385652
Part#: PPS-1721
In Stock
$25.95
Free Shipping on orders $99 and up

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

  • Coated six-point deep-well impact sockets 
  • Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
  • 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

Schwaben Oil Storage Catch Can - 10-Liter
Schwaben - Corporate Logo
T#:370506
Part#: POC-10
In Stock
$20.95
Free Shipping on orders $99 and up

Large capacity oil drain catch can lets you perform a mess-free oil change and dispose of your drain oil responsibly.

Features:

  • Made from rugged ABS
  • 10 liter capacity (large enough to hold two oil changes from most passenger cars and light trucks)
  • Large double handles and drain spout with screw cap
  • Fill and vent plugs have o-ring seals to prevent leakage

 


Schwaben Coolant Refill/Air Purge Tool
Schwaben - Corporate Logo
T#:362940
Part#: 003466SCH01
In Stock
$86.95
Free Shipping on orders $99 and up

When it comes to BMW's we all know the weak point is commonly in the cooling system, many models proving hard to bleed the air pockets out after the refresh. The coolant refill tool solves this problem, ensuring that you get an air pocket free fill. The entire task is as simple as draining the system like normal, reinstalling the drain plugs and hooking the tool up to your refill location. The reason this tool works so well is due to the venturi valve, it converts air pressure from the compressor to vacuum inside the cooling system, then with a twist of a valve sucks coolant right into the system using the vacuum pressure.  


This tool requires access to a standard air compressor with a minimum rating of 90 PSI (6.2 bar).  A convenient, though not required part to complete the job is a container large enough to hold the entire coolant mixture capacity for your vehicle.  This will dramatically reduce the risk of any unwanted air being drawn into the system.  This tool is designed to refill the cooling system after it has been drained.

 


Schwaben 6.5 Liter Fluid Extractor
Schwaben - Corporate Logo
T#:366793
Part#: 011885SCH01A
In Stock
$86.95
Free Shipping on orders $99 and up

6.5 Liter Extractor system is hand -operated for fast extraction of any type of fluid. Two different diameter extracting tubes are included to suit your particular application. Unit has a vacuum release button for quick and easy release. 

Features:

  • Flip out foot for stability whils using the extractor
  • Built in hose storage
  • 41" Main tube 3/8" OD
  • Two 35" extension tubes 1/4" and 3/16" OD ( couples to main tube).
Schwaben 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench
Schwaben - Corporate Logo
T#:361021
Part#: DO-3236
In Stock
$20.95
Free Shipping on orders $99 and up

Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport tech's use!

Features:

  • Made of Chrome Vanadium Steel for strength
  • 32/36mm open end sides

 

Compact European Pressure Brake Bleeder
Schwaben - Corporate Logo
T#:387327
Part#: 018222SCH01A
In Stock
$30.95
Free Shipping on orders $99 and up

Need to bleed your brakes in the near future? This Compact European Pressure Brake Bleeder is perfect for the job and has many features that makes the job significantly easier. It has all of the features of the Schwaben full sized brake bleeder kit.

Features:

  • 45 mm euro master cylinder adapter.
  • Hand held pump with 30 psi gauge .
  • 36" long hose on pump to bottle.
  • 22" long hose from bottle to master cylinder cap adapter.
  • Convenient hook on fluid bottle allows bottle to hang above master cylinder, out of the way.
  • Bottle has a pressure relief valve.
  • Includes 12" waste oil tube for bleeder.
  • 400cc Container


Schwaben 1/2" Drive Torque Wrench - ft-lbs
Schwaben - Corporate Logo
T#:361842
Part#: TW-12450
In Stock
$41.95
Free Shipping on orders $99 and up

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

  • Reversible ½-inch drive click-to-stop
  • Torque range of 10 to 150 ft-lb
  • Accurate to within +/-4%
  • 18 inches in length with a convenient carry case
Schwaben Wheel Storage Rack With Casters
Schwaben - Corporate Logo
T#:376593
Part#: 003639SCH01A
In Stock
$59.95
Free Shipping

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

 

 

Fits up to 8½" wide wheels, depending on offset