Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence of this oil mist in the intake charge may even increase the risk of engine-damaging detonation. 

With forced induction, track use, and/or extended high RPM usage, these symptoms increase as the factory PCV system is overwhelmed, and a catch can becomes a must for your E46 M3. This kit is a direct fit making this an easy reversal if desired as well as maintaining a clean appearance by utilizing the open "smuggler's compartment" on the passenger side of the engine bay.

*Click here for catch can instructions*

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton o-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Valved drainage system - no removal of can necessary to empty

NOW LOCATED UNDER T#340200

The E46 is by no means a very old car. But more and more E46s are seeing track use or being converted to all-out track cars. And the odometers aren't rolling backwards. With age, mileage, and hard use the chassis will develop weak points that threaten the overall integrity of the car. When suspension points and subframes start to rip from the car, it puts the driver and anyone else at a serious safety risk. Not to mention the obvious effects on the performance of the car. TMS has developed reinforcements for the most-common weak points in the E46 chassis. With these kits in place you can be sure that your car spends less time on a body rack and more time on the race track. Included in this package are all of the reinforcements we developed for the E46:
 

• front subframe
• front strut towers (not applicable for M3)
• rear shock towers
• rear camber arms
• rear sway bar / swaybar tabs (not applicable for M3)
• rear subframe
  
  
  
  
   
•  
•  
• This item fits the following BMWs:
  1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

Factory bushings are more than adequate for street driving on the E46 M3. However, once the miles start to pile up, the bushings are meant to be replaced. Common side effects of worn factory FCABs include, but are not limited to the following:

• Steering wheel shutter when brakes are applied
• Wheel (and steering wheel) shimmy
• Mysterious and irregular tire wear
• "Overboosted" steering feel (very light steering)

Replacing with new factory bushings will return the factory feel. These urethane core bushings, however, offer something MORE. These bushings are designed to deliver performance that surpasses the stock E46 M3 bushing, while still allowing them to be used in everyday driving scenarios on public roads.

With the numerous delrin/urethane/hybrid replacement bushings in the market, we wanted to offer bushings that were not only effective, but simple. No clips, no washers, no multiple sleeves, and no "race parts in street cars". They have an aluminum outer sleeve with a replaceable, compliant urethane core that is serviceable and rebuildable. These urethane inserts prevent unwanted control arm deflection, while allowing noise/vibration/harshness (NVH) isolation -- a must on any bushing being used on a street driven car. And because of their compliance they remain very comfortable for daily use. But because they are a heavier-duty design than stock, these eliminate steering shimmy and wander, especially with the addition of big brake upgrades. They maintain BMW's original suspension geometry, and give your M3 a directly "connected" feeling with the front end of the vehicle. Perhaps best of all, these bushings are easy to install and are designed for longevity. Professional installation on suspension components is always recommended.

Installation Instructions

This item fits the following BMWs:
2001-2006 E46 BMW M3