Showing 13687 results for ""

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This coilover kit fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335d 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i

Enhance your BMW or MINI's aesthetic appeal with the Alzor Style 030 wheels, offering a competitive edge and head-turning style. Featuring a sleek split-spoke design and mesh face, these wheels elevate your car's appearance and ensure attention as you drive by. Engineered for hassle-free installation, these wheels seamlessly fit your vehicle without any modifications.

For an extreme and personalized appearance, explore our vast selection of ECS Tuning wheel spacers and lug bolts to achieve the perfect look for your vehicle.

• Wheel size: 19x8.5" ET35
• 72.6mm center bore
• 5x120 bolt pattern
• Split spoke mesh design with a concave face
• Hyper silver finish
• TPMS compatible
• Utilizes factory conical seat bolts
• Wheel weight: 28.3lbs
• 64.5mm center cap

Alzor wheels adhere to stringent VIA certification and meet JWL technical standards, ensuring exceptional quality, performance, and safety.

Tekniform Style 006 Hyper Silver

Diameter: 20" Width: 9" Offset: +30mm Center Bore: 72.6mm Bolt Pattern: 5x120 Pirelli P Zero Run-Flat (PZ4) Tires

Size: 255/30R20 Treadwear: 560 AA A

ECS Tuning N54/N55 Cat-Back Exhaust for BMW E9X Take your 335i or 335xi to the next level with a high-performance cat-back exhaust designed to invigorate your driving experience. Constructed from premium brushed stainless steel, this ECS cat-back exhaust isn’t just about cutting weight—it’s about delivering unrestrained performance with a refined, yet powerful tone. Expect a thrilling soundtrack that underscores every shift and acceleration, giving you that much-needed connection to the road.

This exhaust system is crafted with balance in mind, providing a potent sound without the excessive drone that disrupts highway cruising. Designed for the N54 and N55 engines, it integrates seamlessly with both stock and aftermarket downpipes. Featuring twin 2.5” mandrel-bent pipes and turbo-style mufflers, this exhaust offers increased flow, weight savings, and a deep, exhilarating tone that complements the BMW’s high-output turbocharged engine.

Why Upgrade?

Better Sound and Flow: A dual 2.5” mid-pipe setup leads back to lightweight, turbo-style mufflers. Designed for unrestricted flow, the exhaust enhances horsepower, torque, and throttle response. Signature Tips: Complete with dual black chrome 3.5” tips, this system not only sounds incredible but looks the part, too. Weight Savings: Shedding 37% of the weight, this exhaust replaces the heavy factory cat-back and lightens your load to support a sportier feel. Improved Performance: Reduced backpressure for smoother, more responsive acceleration. Precision Engineering

Design Technology: Using FARO ARM laser scanning and SolidWorks 3D CAD, this system is built for an exact fit. High-Quality Materials: T304 stainless steel construction with 1.25mm wall thickness, TIG-welded for durability. OEM Fitment: Stainless steel hangers are welded in OE locations for a seamless, factory-quality installation. Adjustability: Strategic slip joints make adjustments easy, so you achieve the ideal alignment for your setup. What’s Included?

Dual 2.5” mid-pipes and rear exhaust section High-flow turbo-style mufflers Complete mounting hardware and clamps Black chrome 3.5” exhaust tips Turner Motorsport Performance Ignition Coils

Boosted Performance: Enhanced spark energy translates to a stronger and more reliable combustion cycle. Direct Fitment: Engineered for seamless installation with your BMW’s ignition system. Distinctive Turner Blue: Adds a stylish touch to your engine bay, making it look as good as it performs. Benefits at a Glance

Enhanced Exhaust Sound: Deeper, more aggressive note with minimized cabin drone. Lighter Build: 37% lighter than stock for added agility. Free Ignition Coils: Improved spark for consistent performance and fuel efficiency. Performance Ready: Fully compatible with both OEM and aftermarket setups. Turn heads, enjoy the ride, and make the most out of your BMW’s power with this ECS Tuning N54/N55 Cat-Back Exhaust and Turner Ignition Coil combo—built for enthusiasts who demand the best in performance and style.