PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BMW E84 E9X Rear Slotted Brake Rotors - Pair (336x22): Upgrade Your BMW's Braking Performance

• Enhances brake cooling and reduces brake fade
• Improves braking response and overall stopping power
• Reduces brake pad wear for extended pad life
• Provides a stylish appearance with slotted design

Upgrade the braking performance of your BMW with the BMW E84 E9X Rear Slotted Brake Rotors. These brake rotors are specifically designed to fit BMW E84 and E9X models, providing enhanced braking performance and durability. With a slotted design, they help improve brake cooling, reduce brake fade, and enhance overall stopping power. Additionally, they reduce brake pad wear for extended pad life, saving you money on replacement pads in the long run. Plus, their stylish appearance adds a sporty touch to your BMW's exterior. Access Secret Premium Dashboard

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2011 E82 E88 BMW 1M Coupe
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2006-2011 E90 BMW 330i 330xi 335i 335xi - Sedan
2007-2013 E92 BMW 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 335i 335is M3 - Convertible

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2006-2011 E90 BMW 335d 335i 335xi - Sedan
2007-2013 E92 BMW 335i 335is 335xi - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2012-2015 E84 BMW X1 xDrive35i

Enhance your BMW E9X M3's braking performance with the comprehensive ECS Performance Brake Kit, ideal for both street and track applications. Engineered to deliver exceptional stopping power without compromising compatibility with factory 19" wheels, this kit is a game-changer in terms of both form and function.

• Enhanced Brake Cooling: Enjoy a 50% increase in brake cooling and heat carry capacities for improved performance.
• Eye-catching Calipers: Vibrant blue Brembo 6-piston calipers adorned with ///M logos offer a stunning visual behind your wheels.
• Simple Installation: No vehicle modifications necessary, making installation as straightforward as a standard brake service.
• Factory Wheel Compatibility: Fits perfectly under factory 19" Style 219 front wheels, with fitment guidance provided for other wheel types.
• Included Components:
  • Genuine F10 M5/Brembo 6-piston calipers
  • ECS Tuning 2-piece 382x36mm rotors
  • ECS Tuning Exact-Fit brake lines and stainless steel rotor set screws
  • Pentosin Super DOT4 brake fluid
  • Hardware & pad wear sensors for the front

The rear segment of this kit includes ECS 2-piece rotors, Cool Carbon Performance brake pads, and ECS Exact-Fit brake lines, completing the comprehensive upgrade for consistent and reliable braking power.

Installation Note: Front brake kit reuse factory brake dust shields; slight bending of caliper dust shields is required.

Ensure proper torque values during installation:

• Bracket to knuckle: 110Nm
• Caliper to bracket: 115Nm

ECS M Performance Big Brake Kit: Upgrade Your BMW's Braking Power

Elevate your BMW's performance with the ECS M Performance Big Brake Kit. This kit offers a unique retrofit of F30 M Performance brakes onto E9X non-M models, providing exceptional braking power and a striking appearance. Included are M Performance Brembo calipers, ECS 2-piece rotors, Exact-Fit Stainless Steel Brake Lines, and Genuine BMW brake pads for an all-encompassing brake upgrade.

Key Benefits:

• Enhanced brake torque and response
• Firmer pedal feel for improved modulation
• Optimal balance for the E9X chassis
• Improved cooling and reduced fade
• Tested ECS Exact-Fit Stainless Steel Brake Lines
• Weight-saving ECS 2-piece Cross-Drilled/Slotted Rotors

RSL19 A favorite of BMW's Motorsport engineers, the Pagid RSL19 compound is an endurance pad based on the RS14 Black but with less friction to improve modulation and low pedal effort. These pads work best in a heat range up to 1,100* F. The combination of friction levels, fade stability, and long life for pads and rotors makes this a favorite for club and HPDE drivers. 

This kit includes both the Front and Rear brake pads.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2008-2013 E9X BMW M3