Genuine BMW BMW Engine Parts for BMW 3 Series E92 (2007-2013)

BMW N52 3.0L Timing Chain Kit is essential for maintaining the longevity and performance of your BMW’s engine. The N52 engine, with its interference design, is particularly vulnerable to catastrophic damage if the timing chain fails. Over time, the timing chain may stretch or wear, causing the engine to skip timing or fail completely. This comprehensive kit includes all the necessary components to service the timing chain and prevent potential engine damage.

Benefits:

• Prevents catastrophic engine damage: Protects your engine from valve-piston contact due to timing chain failure.
• Comprehensive kit: Includes all OEM-quality parts required for a full timing chain service.
• Enhanced engine reliability: Replaces worn timing components to ensure proper engine timing and performance.
• Genuine BMW parts: Ensures long-lasting durability and optimal fitment for your BMW N52 engine.
• Complete solution: Includes spark plugs, timing chain, guides, tensioners, gaskets, and fluids.

Genuine BMW N55 3.0L High-Pressure Rail

A crucial component designed to optimize fuel delivery and engine performance in your BMW vehicle. Specifically engineered for the N55 3.0L engine, this high-pressure rail ensures precise fuel injection for efficient combustion, maximizing power output and fuel efficiency. Its high-quality construction and precise engineering guarantee durability and reliability, while its seamless integration with the engine system ensures hassle-free installation. Trust Genuine BMW parts for superior quality and compatibility.

• Optimizes fuel delivery and engine performance
• Specifically engineered for N55 3.0L engine
• Ensures precise fuel injection for efficient combustion
• High-quality construction for durability
• Seamless integration for hassle-free installation

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Genuine BMW Bearing Ledge Intake
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Valvetronic Actuator Replacement Kit

Revitalize your engine's Valvetronic system with the Valvetronic Actuator Replacement Kit. This comprehensive kit includes the Valvetronic actuator, actuator gasket, and valve cover gaskets, ensuring a complete overhaul for optimal performance. Crafted to OEM specifications, these components guarantee precise fitment and reliable functionality. Say goodbye to Valvetronic issues and restore your engine's efficiency with this all-in-one replacement kit.

• All-in-one valve cover overhaul
• Preventative replacement saves time and trouble later on
• Includes new oil separator and check valve systems
• Replace valve cover gaskets before a leak becomes worse
• Replace valve cover before it cracks

A cracked valve cover can cause a myriad of problems none of which are inexpensive. A simple oil leak may prove nothing more than a driveway nuisance; however, the damage that can occur as a result of low oil do more to drain the wallet. A small vacuum leak may cause only a minor hesitation but the reduced efficiency means less mpg's and more trips to the pump. This factory replacement valve cover will get you back on the road and ensure a solid and tight seal along the top end of the engine. 
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Cylinder Head Cover -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55
 

Enhance the electrical system of your BMW with the Genuine BMW E9X Rep. Wiring Harness, Strut S - 61129206018. This genuine BMW part ensures optimal performance and reliability, providing a seamless replacement for your vehicle's wiring harness.

• Genuine BMW part for guaranteed compatibility and reliability
• Designed to meet BMW's strict quality standards
• Ensures proper electrical connections and functionality
• Easy installation with precise fitment

Genuine BMW Bearing Ledge Exhaust
 

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55
 

BMW E82 E9X N54 N55 Motor And Transmission Mount Kit is designed to restore optimal engine and transmission stability in your BMW. Over time, motor and transmission mounts can wear out, leading to excess movement during shifting or idling. This comprehensive kit from Turner Motorsport provides genuine BMW motor and transmission mounts along with the necessary hardware to ensure a secure fit and smooth performance. Replace your worn mounts to reduce vibrations and improve overall driving dynamics.

Benefits:

• Restores Stability: Eliminates excess movement and slop in the engine and transmission.
• Improves Shifting: Reduces vibrations and enhances smooth shifting performance.
• Genuine BMW Parts: Includes OEM motor and transmission mounts for a perfect fit.
• Complete Kit: Comes with all necessary hardware for easy installation.

Upgrade your BMW with the BMW E82 E9X N54 N55 Motor And Transmission Mount Kit to maintain performance and driving comfort.