BMW Engine Parts for BMW 3 Series E92 (2007-2013)

Genuine BMW Camshaft Exhaust Timing Gear - E9X M3 S65

T#:34720

Part#: 11367841117

Ships in 4 Business Days

2% off MSRP $ 1,365.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,337.99 USD

Add to Wish List

Qty

2% off MSRP

$ 1,365.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,337.99 USD

Add to Wish List

This timing gear is located on the end of the camshaft, and is sometimes replaced during timing services.

Genuine BMW Tensioner Pulley - E90 E92 E93 M3

T#:22243

Part#: 11287841527

In Stock

8% off MSRP $ 286.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 262.99 USD

Add to Wish List

Qty

8% off MSRP

$ 286.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 262.99 USD

Add to Wish List

Genuine BMW Adjusting Pulley With Lever -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65

Genuine BMW Drei Bond 1385 Liquid Sealant - 50g - 83190417376 ...

T#:201069

Part#: 83190417376

Ships in 4 Business Days

4% off MSRP $ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD

Add to Wish List

Qty

4% off MSRP

$ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD

Add to Wish List

Drei Bond 1385 is the exact liquid flange sealant specified by BMW factory technicians for critical mating joints like bedplates, oil pans, and timing cases. Its advanced anaerobic formula cures into a tough, pressure resistant seal under clamp load, ensuring zero fluid migration and maintaining structural joint integrity under track conditions.

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Back Ordered

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Genuine BMW Standard Replacement Head Gasket - E9X M3

T#:25745

Part#: 11127841560

Ships in 5 Business Days

13% off MSRP $ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 229.99 USD

Add to Wish List

Qty

13% off MSRP

$ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 229.99 USD

Add to Wish List

This is the standard replacement head gasket for either the left or right bank on the S65 engine.

OEM Accessory Belt Service Kit - E9X M3 S65

For vehicles with production date from 04/2008

10X Entries Into Our F80 M3 Sweepstakes

T#:391554

Part#: 11287837898

Ships in 1-2 days

$ 964.99

This product was last offered at the strikethrough price on
08-24-2026

Starting at $ 928.99 USD

Add to Wish List

Starting at $ 928.99 USD

Add to Wish List

This comprehensive kit includes both belts, belt tensioners, upper and lower deflection pulleys, and the adjusting pulley. Select from all Genuine BMW parts or a combination of OEM/OE BMW parts. Staying on top of your belt maintenance is the smart move. Cracked or worn belts are a recipe for a headache or worse. The main drive belt runs critical components - the alternator, water pump, and power steering pump. The pulleys contain bearings that may be worn when it comes time to replace the belts. You can check the pulleys by relieving tension on the belt and feeling each pulley for play or grinding. The tensioner also sees similar wear. If your pulleys are new or don't need replacement, you can pick up the belts on their own.

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1600cc -...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:43041714

Part#: 501-0114

Ships in 9 Business Days

$ 1,040.99 USD

Add to Wish List

Qty

$ 1,040.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

T#:38094309

Part#: 201-0274

Ships in 5 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

Replacement Fuel Filter Element - Single Open 10 Micron | Precision R...

T#:38161702

Part#: 101-0256

Ships in 9 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
Versatile use – Perfect for daily driving, street, and high-performance applications
Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as necessary
Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

Spool Performance Helix HPFP Overdrive Unit - N55

T#:9642131

Part#: SP-54HX-1-N55

In Stock

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The early N55 high-pressure pump is a very capable and over-engineered piece of hardware. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in early N55 fuel systems without the complexity of a secondary port injection system.

Show More Show Less

FTP Motorsport Low Temp Oil Thermostat - N54/N55

T#:582222

Part#: SG84006

Ships on Nov 12, 2026

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

This thermostat will open sooner and help to lower the overall oil temperature.

Precision Raceworks High Performance Ignition Kit - Black Coils - BMW...

T#:38229094

Part#: 601-0108-1

Ships in 6 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Rid your BMW's N55 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies!

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

T#:5215999

Part#: 601-0096

Ships in 8 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Complete Valve Cover Gasket Kit - BMW S65 4.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:28869570

Part#: 11127838271TKT

Ships in 7 Business Days

$ 323.99

This product was last offered at the strikethrough price on
06-05-2026

$ 300.99 USD

Add to Wish List

Qty

$ 300.99 USD

Add to Wish List

If your valve cover is leaking oil or a bad seal is causing vacuum issues and check engine lights, we recommend replacing your seals with this complete valve cover gasket kit! This kit includes all of the main gaskets and o-ring seals used by BMW to seal your valve cover to the cylinder head. Included: Victor Reinz Left & Right Valve Cover Gaskets Genuine BMW Oil Separator Seal O-rings - Two Per Valve Cover Genuine BMW Crankshaft Position Sensor O-Rings - Two Per Valve Cover URO Spark Plug Tubes w/ Gaskets If you are not replacing your valve cover, we also recommend inspecting the grommets found on the valve cover bolts. Over time these can compress or split, leading to insufficient sealing of the valve cover to the cylinder head due to a lack of pressure. BMW does not offer these grommets separately from their individual valve cover bolts, but NRW Design came in clutch with their Silicone Valve Cover Grommet Kit.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L

T#:639879

Part#: VAC-HPCD-N54

In Stock

$ 1,059.99 USD

Add to Wish List

Qty

$ 1,059.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley.

Show More Show Less

Precision Raceworks High Performance Ignition Kit - Blue Coils - BMW ...

T#:1762242

Part#: 601-0021-1

Back Ordered

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Rid your BMW's N55 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies!

Show More Show Less

Wastegate Repair Kit - N54

10X Entries Into Our F80 M3 Sweepstakes

T#:41863724

Part#: 116575857456TKT

Ships on Sep 23, 2026

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

Get rid of that annoying N54 Wastegate Rattle for good!

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

T#:38161743

Part#: 622-0270

Ships in 10 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 6 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines.

Show More Show Less

OEM VDO Crankshaft & Transmission Position Sensor - Multiple BMWs ...

We Price Match - Give Us A Call or Chat!

T#:14949

Part#: 13627525015

Ships on Feb 1, 2027

$ 89.63 USD

Add to Wish List

Qty

$ 89.63 USD

Add to Wish List

This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars.

4 Pc. Spark Plug Socket Set-Euro

T#:1241318

Part#: CTA2030

Ships on Sep 23, 2026

$ 81.95 USD

Add to Wish List

Qty

$ 81.95 USD

Add to Wish List

Get the complete set and be ready.

Accusump Marine 2 Qt Kit

T#:8246787

Part#: 24-126

Ships on Sep 28, 2026

17% off MSRP $ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD

Add to Wish List

Qty

17% off MSRP

$ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD

Add to Wish List

FAE Oxygen Sensor - E90, E92, E93

T#:583149

Part#: 11787537984

Ships on Sep 30, 2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Located on the catalytic converters, 2 required

Elring Crankcase Gasket Kit - BMW N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:44767322

Part#: 648.530

Ships in 4 Business Days

$ 163.99 USD

Add to Wish List

Qty

$ 163.99 USD

Add to Wish List

Crankcase gaskets and seals can fail just like any other seal on your BMW, leading to oil and coolant loss. If your engine is leaking fluids from multiple sources, this crankcase gasket kit from Elring is just what you need to get your BMW leak-free and back on the road!

Show More Show Less

Wagner Tuning - Head Stud Set Brushed For BMW N55 Engine

T#:42571264

Part#: P102061410.BR

Back Ordered

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Ensure your BMW N55 engine stays sealed and performs at its peak with the Wagner Tuning - Head Stud Set Brushed For BMW N55 Engine—your essential upgrade for power and reliability.

Fuel Injector Replacement Kit - N52

10X Entries Into Our F80 M3 Sweepstakes

T#:53044116

Part#: 13537531634RKT2

Ships on Oct 14, 2026

Sale - Save 22% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Qty

Sale - Save 22%

$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

Oil Pump Chain

10X Entries Into Our F80 M3 Sweepstakes

T#:26271803

Part#: 11417584079

In Stock

Sale - Save 17% $ 36.99

This product was last offered at the strikethrough price on
08-25-2026

$ 30.74 USD

Add to Wish List

Qty

Sale - Save 17%

$ 36.99

This product was last offered at the strikethrough price on
08-25-2026

$ 30.74 USD

Add to Wish List

Leak Detection Pump - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:35121140

Part#: 16137193479

Ships on Nov 9, 2026

Sale - Save 18% $ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 54.39 USD

Add to Wish List

Qty

Sale - Save 18%

$ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 54.39 USD

Add to Wish List

OEM Pierburg Valvetronic Camshaft Adjusting Unit - BMW N52 3.0L ...

T#:26538310

Part#: 11377548388

Ships on Jan 18, 2027

$ 333.99 USD

Add to Wish List

Qty

$ 333.99 USD

Add to Wish List

This Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this OEM Pierburg replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds

Show More Show Less

Oxygen Sensor - Priced Each

T#:21966015

Part#: 11787537984

Ships on Jan 18, 2027

$ 170.99 USD

Add to Wish List

Qty

$ 170.99 USD

Add to Wish List

If your vehicle has a bad oxygen sensor, chances are it may cause you to fail an emissions check. Replace bad oxygen sensors and eliminate those codes.

Cometic Head Gasket - BMW S65B40 - 0.040" Thick

T#:19428661

Part#: C5112-040

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Febi Oil Filter Housing Replacement Kit - 11428683206

For vehicles with High Speed Synchronization (oil cooler) option

We Price Match - Give Us A Call or Chat!

T#:28337870

Part#: 11428683206

Back Ordered

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

These aluminum filter housings are prone to cracking, which can lead to oil leaks and serious engine damage. To avoid such issues, it's essential to replace the entire housing and cooler assembly.

Fortunately, Febi provides a top-quality reproduction unit at a much lower cost than genuine parts. If you require a replacement filter housing, opting for Febi-Bilstein ensures a cost-effective and durable solution.

Show More Show Less

Genuine BMW Crankcase Gasket Set - E90 E92 E93 M3 S65

T#:30559

Part#: 11110429839

Back Ordered

13% off MSRP $ 379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.99 USD

Add to Wish List

Qty

13% off MSRP

$ 379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.99 USD

Add to Wish List

Lower engine gasket set include oil pan gasket, crank and intermediate shaft seals and seal cover gaskets, and miscellaneous o-rings and gaskets. Perfect for lower engine repairs or to stop engine oil leaks originating from the engine block area.

Show More Show Less

N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241396

Part#: TMSN54BPKT

Back Ordered

Sale - Save 11% $ 541.99

This product was last offered at the strikethrough price on
05-03-2026

$ 481.94 USD

Add to Wish List

Qty

Sale - Save 11%

$ 541.99

This product was last offered at the strikethrough price on
05-03-2026

$ 481.94 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924

Show More Show Less

OEM INA Engine Timing Chain - N47, N20

T#:42301983

Part#: ZC0219

In Stock

$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.

BMW S65 4.0L MAHLE Forged Piston Kit 92mm

T#:2928987

Part#: 197843622

In Stock

$ 1,429.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,335.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,429.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,335.99 USD

Limited Qty Sale

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Cometic Gasket For N54

T#:26071905

Part#: H4293SP1052S

Back Ordered

$ 253.99 USD

Add to Wish List

Qty

$ 253.99 USD

Add to Wish List

Upgrade your BMW 135i, 335i, X6, or Z4 with the Cometic 85.5mm Bore .052in MLX Head Gasket.

This high-quality gasket ensures a reliable seal for your engine's cylinder head, preventing leaks and maintaining optimal compression. Crafted with precision and durability in mind, it offers superior performance and longevity, making it an ideal choice for BMW enthusiasts seeking reliable engine components.

Provides a reliable seal for the cylinder head
Prevents leaks and maintains optimal compression
Crafted with precision for superior performance
Durable construction ensures longevity
Compatible with BMW 135i, 335i, X6, and Z4 models

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

T#:1331984

Part#: 601-0062

In Stock

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Genuine BMW Hydraulic Valve - 11417584989 - E71,E82,E90,E92,E93,F10 ...

T#:35056

Part#: 11417584989

In Stock

3% off MSRP $ 246.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD

Add to Wish List

Qty

3% off MSRP

$ 246.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD

Add to Wish List

Genuine BMW Hydraulic Valve -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F10

Fits BMW Engines including:
N55

E82/E9X Genuine BMW Motor Mount - Right

T#:19667

Part#: 22116773744

In Stock

3% off MSRP $ 242.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 235.98 USD

Add to Wish List

Qty

3% off MSRP

$ 242.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 235.98 USD

Add to Wish List

Collapsing and worn engine mounts can mean big trouble for N52/N54/N55 cars. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts.
This is a Genuine BMW replacement. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Genuine BMW 3 Pin Socket Housing Repair Kit - Multiple BMWs

T#:215615

Part#: 61132359997

In Stock

4% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

Qty

4% off MSRP

$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

This is Genuine BMW 3 pin electrical socket repair kit.

Genuine BMW Alternator/AC/Power Steering Accessory Belt - E60/61 N54,...

T#:361829

Part#: 11287628653

In Stock

Sale - Save 11% $ 56.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.59 USD

Add to Wish List

Qty

Sale - Save 11%

$ 56.99

This product was last offered at the strikethrough price on
06-03-2026

$ 50.59 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance.

Show More Show Less

E82 135i, E9X 335i, E60 535i ECS Baffled Oil Catch Can

10X Entries Into Our F80 M3 Sweepstakes

T#:388332

Part#: 003779ECS05A0

In Stock

Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 215.09 USD

Add to Wish List

Sale - Save 10%

$ 238.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 215.09 USD

Add to Wish List

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. A dipstick is integrated into the cap so you can monitor the oil level. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. Multiple brackets are available so you're not limited on where to mount it. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xi

Show More Show Less

Genuine BMW Fuel hose

T#:42244

Part#: 13537594825

Ships in 2 Business Days

5% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.00 USD

Add to Wish List

Qty

5% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.00 USD

Add to Wish List

Genuine BMW Fuel Hose
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F25 X3

Fits BMW Engines including:
N54,N54T,N55

Turbo Water Feed Line - Rear Turbo

10X Entries Into Our F80 M3 Sweepstakes

T#:26771655

Part#: 11537558901

In Stock

Sale - Save 20% $ 50.99

This product was last offered at the strikethrough price on
05-03-2026

$ 40.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 50.99

This product was last offered at the strikethrough price on
05-03-2026

$ 40.79 USD

Add to Wish List

N54 Mishimoto Baffled Oil Catch Can

T#:383384

Part#: MMBCCN5406CBE

In Stock

$ 253.99 USD

Add to Wish List

Qty

$ 253.99 USD

Add to Wish List

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N54 twin-turbo engine: 2008-2010 E82 E88 BMW 135i 2007-2010 E9X BMW 335i 335xi 2006-2010 E60 BMW 535i 535xi WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Bav Auto Ratcheting Serpentine Belt Wrench Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580390

Part#: B8800077

In Stock

Sale - Save 10% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Used to retract your serpentine belt tensioner. This kit includes 18mm, 5/8 in, 14mm, 13mm, 12mm, sockets and 3/8 in and 1/4 in drive adapters

Bosch Starter Motor With Hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:56110332

Part#: SR0492NKT4

In Stock

$ 273.99

This product was last offered at the strikethrough price on
08-14-2026

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.

Show More Show Less

Crankshaft Thrust Bearing - Yellow - E60, E63, E64, E90, E92, E93 ...

T#:32721

Part#: 11217841613

Ships on Sep 8, 2026

6% off MSRP $ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

6% off MSRP

$ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Genuine BMW Guide-Bearing Shell Yellow - 70,00Mm(0)
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63,E90,E92,E93

Fits BMW Engines including:
S65,S85

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344808

Part#: N54OFHGKT

In Stock

Sale - Save 1% $ 171.99

This product was last offered at the strikethrough price on
08-18-2026

$ 171.09 USD

Add to Wish List

Qty

Sale - Save 1%

$ 171.99

This product was last offered at the strikethrough price on
08-18-2026

$ 171.09 USD

Add to Wish List

If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series E92 (2007-2013)

Sub-Categories

Fuel Filter Replacement Guidelines:

Upgrade your BMW 135i, 335i, X6, or Z4 with the Cometic 85.5mm Bore .052in MLX Head Gasket.

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results