BMW Intake Parts for BMW 3 Series E92 (2007-2013)

T-Bolt clamp used for the intercooler piping. This ensure that there will be no leaks from the intake hoses or pipes, holding everything tightly together.

Genuine BMW Clamp
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N54,N54T,N63,N63N

Enhance your BMW's performance and sound with the Turner Motorsport N54 Valved Catback Exhaust. This exhaust system delivers a dual-purpose experience, offering a subdued note with the muffler valves closed, maintaining a near-factory sound. Open the valves with the included controller, and unleash a menacing growl, transforming your driving experience. Crafted with mandrel-bent dual 2.5" 304SS pipes and a high-flow valved stainless steel muffler, this system is a bolt-on replacement for the OE version, ensuring easy fitment with Accuseal slip-fit joints. Elevate your 335i's exhaust with the Turner Motorsport E9X 335i full exhaust system, available as Axle Back, Cat-back, or Turbo back.

Key Features:

• Dual 2.5" 304SS pipes with brushed finish
• Valved stainless steel muffler for dual-sound experience
• Accuseal slip-fit joints for easy fitment
• Turner Engraved Polished exhaust tips
• Utilizes factory exhaust hangers for straightforward installation

Kit Includes:

• Turner Mid Pipes for factory catted mid pipes
• Turner Valved Exhaust
• Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips
• Gaskets and Nuts

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2007-2010 BMW 335i (E9X) L6-3.0L (tt) N54 engines, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16" TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed gains up to +14 horsepower and +18 lbs. x ft. without any type of tune, and dropped the intake air temperature up to 10 degrees.

End Tanks: 
The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection.

5" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory.

TIG-Welded:
100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks.

Pressure Tested: 
The BladeRunner Intercooler is test pressure rated at 200psi.

Perfect Fit:
Utilizes the factory mounting locations for a hassle-free installation. The billet 2 1/2" intercooler inlet utilizes a factory style quick connect to assure compatibility with the factory hot side inlet tube. The supplied cold side tube retains the factory style throttle body quick connect and retains the factory diverter valve connections. This kit will not work with the factory cold side intercooler tubing.

DETAILS:

• Up to +14 HP / +18 lbs. x ft. Torque max gains without any tuning
•  Lowers manifold intake air temperature by up to 10 degrees
•  2-1/2" Billet aluminum inlet and outlet for superior strength & durability
•  Incorporates the factory style quick connect adaptor for the hot side intercooler tube and throttle body connection
•  5" Bar and plate core design that is 29% larger than stock
•  This intercooler is 100% TIG-Welded by certified craftsmen for strength and durability
•  1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
•  3" Upper cold-Side mandrel-bent aluminum tubing powder-coated wrinkle-black for heat resistance
•  5-Ply polyester reinforced silicone lower cold-side hose with metal inserts to withstand extreme amounts of boost pressure
•  Absolutely no cutting or modifications are needed for the installation of this intercooler kit

Fits the following BMWs:
2007-2010 E9X 335i w/ N54