Packaged by Turner for BMW 3 Series E92 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

DCT Transmission Service Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644257
Part#: 17222245358-KT
In Stock
Sale - Save 1% $ 499.95

This product was last offered at the strikethrough price on
05-03-2026

$ 494.69 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 499.95

This product was last offered at the strikethrough price on
05-03-2026

$ 494.69 USD
Free Shipping on orders $49 and up
The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that last a lifetime. With that being said, Turner Motorsport has assembled a proper DCT service kit that takes the guesswork out of the equation. No need to track down the correct fluid and plugs, simply open the box, and get the job done the correct way. By servicing your DCT transmission, you will be assured that old, broken down fluid won't cause a several thousand dollar nightmare. Turner Motorsport recommends this service every 40,000 miles to keep your transmission going strong for years to come. Kit includes: 5 quarts of Pentosin DCTF-1 fluid DCT transmission cartridge and suction filters Drain and fill plugs Oil pan with gasket
Show More Show Less
Bosch - Factory Spec Ignition Service Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556734
Part#: N55TISKT
In Stock
$ 276.99 USD
Free Shipping
$ 276.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Oil Filter Housing Gasket Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677487
Part#: 11427542983-KT
In Stock
$ 122.99 USD
Free Shipping on orders $49 and up
Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less

Performance Water Pump And Thermostat Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710799
Part#: 11517632426-KT
In Stock
Sale - Save 20% $ 514.99

This product was last offered at the strikethrough price on
05-03-2026

$ 410.34 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 514.99

This product was last offered at the strikethrough price on
05-03-2026

$ 410.34 USD
Free Shipping on orders $49 and up
The stock thermostat is designed to open at 97C. This leaves your engine running fairly hot, and running for quite awhile before your thermostat will begin operation. With the Mishimoto Racing thermostat, the activation temperature becomes 74C. That's 23C cooler, meaning you can rest easy knowing your engine will stay cooler to help avoid all the problems that can be associated with an engine running hot. The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road. Mishimoto Racing thermostat Bavarian Autosport water pump Genuine BMW coolant Mounting hardware required for both the thermostat and water pump
Show More Show Less

Top-Tier BMW N54/N55 Ignition Service Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:21670137
Part#: TMSN5SPCOILKT
In Stock
Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Sale - Save 13%
$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Upgrade your BMW N54 and N55 engine with Packaged by Turner kits for optimized performance and fuel efficiency. Our BMW ignition coils feature specialized modifications to boost firepower, delivering increased torque at lower RPMs and more horsepower at higher RPMs. The extent of improvement depends on your engine's current condition, but you'll undoubtedly experience a noticeable difference in performance. Ensure your BMW's engine runs smoothly and efficiently with our comprehensive ignition service kit from ECS Tuning. This kit includes six Bav Auto ignition coils with plug boots, NGK spark plugs, American Grease Stick dielectric grease, and a BMW spark plug service indicator label. Rest assured with a 2-year warranty on all Bavarian Autosport brand parts. Upgrade your BMW N54 and N55 engine's ignition system today for a remarkable driving experience.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:340286
Part#: TMS14349
In Stock
Starting at $ 137.54 USD
Free Shipping
Starting at $ 137.54 USD
Free Shipping
Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • replace drain bolt crush washer
  • reset oil service/maintenance indicator
  • inspect and top off any other fluids
Annual Service
(click to expand)
  • air filter cleaning or replacement
  • airflow/MAF sensor cleaning
  • A/C microfilter/cabin filter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid (make sure you use the correct Pentosin fluid!)
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect spare tire or tire repair kit, and tire-changing tools
  • inspect drive belt for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
40,000 Mile Major Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance indicator
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD4
  • differential fluid change, using Red Line 75/90 or Motul Gear300 75/90
  • brake fluid flush/bleeding
  • serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation) and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • inspect spark plug cavity in valve cover for leaking valve cover gasket (also inspect coil connector boots)
  • inspect valve cover and throttle body for presence of oil (possible failed oil separator valve)
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
80,000 Mile Major Service
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance indicator
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD4
  • differential fluid change, using Red Line 75/90 or Motul Gear300 75/90
  • brake fluid flush/bleeding
  • fuel filter, pressure regulator replacement (not N51 SULEV engines)
  • serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
  • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

You may also want to pick up these other helpful items:
  • E90/E92 Bentley Service Manual
  • We offer many DIY-related tools, specifically for the E90 owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
    This package fits the following BMWs:
    2006-2011 E90 BMW 325i 328i 330i - Sedan
    2006-2012 E91 BMW 328i - Wagon
    2007-2013 E92 BMW 328i - Coupe
    2007-2013 E93 BMW 328i - Convertible



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less

    Ultimate Performance Brisk Ignition Service Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:5416750
    Part#: E9XUPIGSVTMSKT
    Ships on Oct 26, 2026
    Sale - Save 10% $ 282.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 254.63 USD
    Free Shipping
    Sale - Save 10%
    $ 282.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 254.63 USD
    Free Shipping
    Includes coils, Brisk 1 stage colder plugs, and dielectric grease. Failing ignition coils or plugs can cause sputtering, rough idle, hesitation on acceleration, misfires, and a check engine light. If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connection. Great for modified or Tuned cars This kit contains: 6 Brisk 1 stage colder spark plugs 6 Bav Auto ignition coils One packet of dielectric grease (AGS )
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:558209
    Part#: E9XM3RPRPKT2
    Ships in 1-2 days
    Sale - Save 17% $ 1,133.99

    This product was last offered at the strikethrough price on
    07-14-2026

    $ 940.60 USD
    Free Shipping
    Sale - Save 17%
    $ 1,133.99

    This product was last offered at the strikethrough price on
    07-14-2026

    $ 940.60 USD
    Free Shipping

    When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

    Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

    Brake components in this kit:

    • Pagid Front Brake Pads
    • Zimmerman Front Rotors
    • New Front Wear Sensors
    • Brand New Stainless Steel Set Screws
    • Syl-Glide Silicone Brake Lubricant 

    Fits the following BMWs:
    2006-2013 E9X BMW M3
    2011-2012 E82 BMW 1M

    Show More Show Less

    E9X M3 Build Your Own Maintenance Service Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340275
    Part#: TMS14374
    Ships in 1 Business Day
    Sale - Save 8% $ 241.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 223.57 USD
    Free Shipping
    Sale - Save 8%
    $ 241.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 223.57 USD
    Free Shipping
    Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

    Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW-Castrol 10W60 oil
    • replace drain bolt crush washer
    • reset oil service/maintenance light
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • A/C cabin microfilter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid
    • engine oil analysis (to check for internal engine wear)
    • DCT transmission filter replacement (BMW recommends every 3rd oil change)
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect or replace emergency tire repair kit
    • inspect belts for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    40,000 Mile Major Service
    (click to expand)
    • engine oil change with filter, using OE BMW-Castrol 10W60 oil
    • reset oil service/maintenance light
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • transmission fluid and filter change
    • differential fluid change, using Red Line 75/140 or Motul GearComp 75/140
    • brake fluid flush/bleeding
    • spark plug replacement
    • valve cover gasket replacement
    • engine and A/C serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement

    This package fits the following BMWs:
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible



    Put a check in the boxes next to the items you wish to order.
    Show More Show Less

    Oil Pan Gasket Replacement Kit
    For vehicles with automatic transmission only
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:5403285
    Part#: 11137548031TMSKT
    In Stock
    $ 229.99 USD
    Free Shipping
    $ 229.99 USD
    Free Shipping
    Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
    ClutchMasters Complete Clutch Kit w/ Aluminum Flywheel - FX250 Stage ...
    For Vehicles With 6 Bolt Crankshaft (Production Date From 02/09)
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:41897500
    Part#: FW-075-AL250TKT
    Ships on Dec 14, 2026
    $ 1,759.99 USD
    $ 1,759.99 USD
    Upgrade your BMW's drivability and clutch durability with the ClutchMasters Complete Clutch Kit w/ Aluminum Flywheel – FX250 Stage 2 from Turner Motorsport—a refined yet capable solution for the performance-minded daily driver
    Show More Show Less
    DCT Transmission Service Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710778
    Part#: 28107850241-KT
    In Stock
    Sale - Save 1% $ 396.99

    This product was last offered at the strikethrough price on
    07-14-2026

    $ 394.63 USD
    Free Shipping on orders $49 and up
    Sale - Save 1%
    $ 396.99

    This product was last offered at the strikethrough price on
    07-14-2026

    $ 394.63 USD
    Free Shipping on orders $49 and up
    The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that last a lifetime. Kit includes: 5 quarts of Pentosin DCTF-1 fluid DCT transmission cartridge and suction filters Drain and fill plugs Please note: We include 5 quarts of DCT fluid because without a GT1 diagnostic tool and much more involved labor, you will not be able to replace over 5 quarts of fluid. Many elect to do this service and simply flush the fluid 5,000 miles later to ensure all fluid has been flushed, but this is not mandatory.
    Show More Show Less


    Premium Differential Service Kit - E46 M3, E9X M3, E82 1 M Coupe ...
    10X Entries Into Our F80 M3 Sweepstakes
    Includes BMW SAF-XJ limited slip differential fluid with FM booster
    Packaged by Turner - Corporate Logo
    T#:598688
    Part#: E46M3DIFSERTMSKT
    In Stock
    Sale - Save 5% $ 301.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 286.01 USD
    Free Shipping
    Sale - Save 5%
    $ 301.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 286.01 USD
    Free Shipping
    Servicing your differential is an important job and should only be completed using high quality components! To ensure our customers are getting exactly what they need, we have put together this limited-slip differential service kit that includes all new fluid from BMW, a new BMW drain plug, and one of our new Titanium Magnetic Differential Drain Plugs!
    Show More Show Less
    Ignition Service Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677540
    Part#: 12138616153-KT
    In Stock
    $ 240.99

    This product was last offered at the strikethrough price on
    07-27-2026

    $ 203.99 USD
    Free Shipping on orders $49 and up
    $ 203.99 USD
    Free Shipping on orders $49 and up
    If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 6 Coils with locks 6 spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease
    Show More Show Less
    Cam Bearing Ledge Replacement Kit - BMW N54 3.0L
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:23748158
    Part#: 11127531224TKT
    Ships Today
    $ 1,663.66 USD
    Free Shipping on orders $49 and up
    Have your camshaft bearing ledges seen better days? This kit includes everything needed to replace your cam bearing ledges with Genuine BMW and high-quality OEM components. Included in this kit: Intake Cam Bearing Ledge Exhaust Cam Bearing Ledge Valve Cover Gasket Timing Chain Tensioner Cylinder Head Hardware Assembly Lubricant BMW Engine Oil Hengst Oil Filter
    Show More Show Less

    Liqui Moly Special Tec LL Oil Change Kit / Inspection I
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15644277
    Part#: 071199631290KT
    In Stock
    Sale - Save 6% $ 109.06

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 102.07 USD
    Free Shipping on orders $49 and up
    Sale - Save 6%
    $ 109.06

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 102.07 USD
    Free Shipping on orders $49 and up
    To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
    Show More Show Less

    Brake Line Replacement/ Upgrade Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:597287
    Part#: 022756TMS09KT
    Ships on Nov 3, 2026
    Sale - Save 8% $ 412.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 379.75 USD
    Free Shipping
    Sale - Save 8%
    $ 412.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 379.75 USD
    Free Shipping
    Turner Motorsport stainless steel brake lines with fluid and tools for a complete DIY
    Rotor And Pad Replacement Package - Front And Rear - E9X 325 328 (up ...
    For vehicles with a production date up to 09/2007
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:558186
    Part#: E9XPRERPRPKT
    Ships in 1 Business Day
    Sale - Save 13% $ 580.99

    This product was last offered at the strikethrough price on
    09-26-2026

    $ 503.53 USD
    Free Shipping
    Sale - Save 13%
    $ 580.99

    This product was last offered at the strikethrough price on
    09-26-2026

    $ 503.53 USD
    Free Shipping

    When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

    Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

    Brake components in this kit:

    • Akebono Euro Front & Rear Brake Pads
    • Zimmerman Front & Rear Rotors
    • New Front & Rear Wear Sensors
    • Brand New Stainless Steel Set Screws
    • Syl-Glide Silicone Brake Lubricant 

    Fits the following BMWs:
    2006-09/2007 E9X BMW 325i 328i

    Show More Show Less

    M3/1M Front and rear Control Arm Upgrade Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:557628
    Part#: 33322283547KT9
    Ships on Feb 11, 2027
    Sale - Save 7% $ 975.99

    This product was last offered at the strikethrough price on
    10-08-2026

    $ 909.66 USD
    Free Shipping
    Sale - Save 7%
    $ 975.99

    This product was last offered at the strikethrough price on
    10-08-2026

    $ 909.66 USD
    Free Shipping
    Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.
    Show More Show Less
    Bosch Starter Motor With Hardware
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56110332
    Part#: SR0492NKT4
    In Stock
    New Item
    $ 273.99

    This product was last offered at the strikethrough price on
    08-14-2026

    $ 261.99 USD
    Free Shipping on orders $49 and up
    $ 261.99 USD
    Free Shipping on orders $49 and up
    At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:558198
    Part#: E9X335RPRPKT
    In Stock
    Sale - Save 13% $ 786.64

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 680.73 USD
    Free Shipping
    Sale - Save 13%
    $ 786.64

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 680.73 USD
    Free Shipping

    When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

    Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

    Brake components in this kit:

    • Akebono Euro Front & Rear Brake Pads
    • Zimmerman Front & Rear Rotors
    • New Front & Rear Wear Sensors
    • Brand New Stainless Steel Set Screws
    • Syl-Glide Silicone Brake Lubricant 

    Fits the following BMWs:
    2006+ E9X BMW 335i/is/xi/d
    2012-2015 E84 BMW X1 xDrive35i

    Show More Show Less

    Turner BMW 15mm Wheel Spacer Kit - Normal Pad Size
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:6181661
    Part#: TWH9905013T
    In Stock
    Sale - Save 23% $ 170.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 131.24 USD
    Free Shipping
    Sale - Save 23%
    $ 170.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 131.24 USD
    Free Shipping
    With these kit options you have the ability to transform the appearance and stance of your BMW. Get the wheels dialed in for a better look and wider track width! With optional stud conversion you will be able to change wheels quickly and with ease. Look no further for an affordable way to transform your vehicle! 15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Stud Conversion: Easy install with allen socket. Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. For safety retorque hardware after 25-50 miles. These studs may be used with spacers up to 15mm. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:24344795
    Part#: GA6L45RGSVKT
    Ships Today
    $ 453.99 USD
    Free Shipping on orders $49 and up
    A common failure point that causes the loss of gear selection, this kit includes everything needed to replace the gear selector valve connected to your transmission valve body.
    BMW Water Pump And Thermostat Kit - N54
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:378340
    Part#: 11517632426KT3
    In Stock
    Sale - Save 3% $ 665.86

    This product was last offered at the strikethrough price on
    06-15-2026

    $ 647.35 USD
    Free Shipping
    Sale - Save 3%
    $ 665.86

    This product was last offered at the strikethrough price on
    06-15-2026

    $ 647.35 USD
    Free Shipping

    The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

    Included in this kit:

    Thermostat
    Water pump
    Genuine BMW coolant
    Mounting hardware required for both the thermostat and water pump

    Show More Show Less


    Automatic Transmission Service Kit - E82/88 E83 E9X
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:554533
    Part#: N5XATSKT2
    In Stock
    Sale - Save 5% $ 248.99

    This product was last offered at the strikethrough price on
    06-04-2026

    $ 237.18 USD
    Free Shipping
    Sale - Save 5%
    $ 248.99

    This product was last offered at the strikethrough price on
    06-04-2026

    $ 237.18 USD
    Free Shipping

    Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

    Kit Includes:

    • Automatic transmission filter with associated hardware
    • Oil pan gasket
    • Drain plug with sealing washer
    • Fill plug with sealing washer
    • 7 quarts Redline D6 automatic transmission fluid

    Fits the following BMWs:
    E82/88 BMW 128i - with GA6L45R automatic transmission 
    E83 BMW X3 N52 3.0L - with GA6L45R automatic transmission 
    E9X BMW 328i/xi  - with GA6L45R automatic transmission 

    Show More Show Less
    Front Lower Control Arm - Right - E82 1M, E9X M3
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:338352
    Part#: 31102283578X
    Ships on Feb 11, 2027
    $ 145.99

    This product was last offered at the strikethrough price on
    04-28-2026

    Starting at $ 110.27 USD
    Free Shipping
    Starting at $ 110.27 USD
    Free Shipping
    This right/passenger's front lower control arm - also know as a wishbone - 31102283578 . This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2012 E92 BMW M3 Coupe
    2008-2012 E93 BMW M3 Convertible
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340287
    Part#: TMS211086
    In Stock
    Starting at $ 137.54 USD
    Free Shipping
    Starting at $ 137.54 USD
    Free Shipping
    Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

    Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • replace drain bolt crush washer
    • reset oil service/maintenance indicator
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • airflow/MAF sensor cleaning
    • A/C microfilter/cabin filter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid (make sure you use the correct Pentosin fluid!)
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect spare tire or tire repair kit, and tire-changing tools
    • inspect drive belt for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    40,000 Mile Major Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
    • differential fluid change, using Red Line 75/90 or Motul Gear300 75/90
    • for AWD cars, front differential using Red Line 75/90 or Motul Gear300 75/90 and transfer case using only Genuine BMW TF 0870
    • brake fluid flush/bleeding
    • serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation) and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • inspect spark plug cavity in valve cover for leaking valve cover gasket (also inspect coil connector boots)
    • inspect valve cover and throttle body for presence of oil (possible failed oil separator valve)
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    80,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
    • differential fluid change, using Red Line 75/90 or Motul Gear300 75/90
    • for AWD cars, front differential using Red Line 75/90 or Motul Gear300 75/90 and transfer case using only Genuine BMW TF 0870
    • brake fluid flush/bleeding
    • fuel filter, pressure regulator replacement
    • serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

    You may also want to pick up these other helpful items:
  • E90/E92 Bentley Service Manual
  • We offer many DIY-related tools, specifically for the E90 owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
    This package fits the following BMWs:
    2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi - Sedan
    2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328xi 328i xDrive - Coupe



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less

    Basic High Pressure Fuel Pump Replacement Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15644266
    Part#: 13517616170-KT
    In Stock
    $ 1,678.35

    This product was last offered at the strikethrough price on
    06-19-2026

    $ 1,677.85 USD
    Free Shipping on orders $49 and up
    $ 1,677.85 USD
    Free Shipping on orders $49 and up
    HPFP woes? Replacement high pressure exchange pump for the N54 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket

    Valvetronic Camshaft Adjuster replacement kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677492
    Part#: 11127556161-KT
    In Stock
    Sale - Save 19% $ 220.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 179.28 USD
    Free Shipping on orders $49 and up
    Sale - Save 19%
    $ 220.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 179.28 USD
    Free Shipping on orders $49 and up
    Valv-tronic adjuster unit, Changes the the timing shaft to adjust the valve timing.
    M3 Rear Guide Rod Upgrade - Left and Right - E82, E9x
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340278
    Part#: TMS12080
    Ships in 1 Business Day
    Starting at $ 302.98 USD
    Free Shipping
    Starting at $ 302.98 USD
    Free Shipping

    As Used on Project E92 335i
    These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

    This package includes:

    • Left M3 Guide Rod - 33322283547
    • Right M3 Guide Rod - 33322283548

    Buy as a package and save $$!

    This item fits the following BMWs:
    2008-2012  E82 BMW  128i 135i 1M Coupe
    2006-2011  E90 BMW  325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012  E91 BMW  325xi 328i 328xi 328i xDrive - Wagon
    2007-2013  E92 BMW  328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013  E93 BMW  328i 335i M3 - Convertible

     

    Show More Show Less

    High Pressure Fuel Pump Replacement Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:5389771
    Part#: N55HPFKKT
    In Stock
    $ 1,783.99

    This product was last offered at the strikethrough price on
    07-06-2026

    $ 1,743.99 USD
    Free Shipping
    $ 1,743.99 USD
    Free Shipping
    HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!
    Show More Show Less
    Oil Pan Gasket - With Bolts
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15644297
    Part#: 11132210959-KT
    In Stock
    $ 83.40 USD
    Free Shipping
    $ 83.40 USD
    Free Shipping
    A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

    Rod Bearing Replacement Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:41695012
    Part#: 6B1584H-STDLMTKT
    In Stock
    Sale - Save 1% $ 466.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 463.49 USD
    Free Shipping on orders $49 and up
    Sale - Save 1%
    $ 466.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 463.49 USD
    Free Shipping on orders $49 and up
    Rod bearings are a known issue for your N54, replace them to prolong life of your Engine!

    Wastegate Repair Kit - N54
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:41863724
    Part#: 116575857456TKT
    Ships on Oct 26, 2026
    $ 164.99 USD
    Free Shipping on orders $49 and up
    Get rid of that annoying N54 Wastegate Rattle for good!
    Fuel Injector Replacement Kit - N52
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:53044116
    Part#: 13537531634RKT2
    Ships in 3 Business Days
    New Item
    Sale - Save 16% $ 318.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 268.69 USD
    Free Shipping on orders $49 and up
    Sale - Save 16%
    $ 318.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 268.69 USD
    Free Shipping on orders $49 and up
    Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.
    Packaged by Turner - Corporate Logo
    T#:582866
    Part#: T31126768989KT
    Ships in 1 Business Day
    Sale - Save 14% $ 502.42

    This product was last offered at the strikethrough price on
    04-15-2026

    $ 433.51 USD
    Free Shipping
    Sale - Save 14%
    $ 502.42

    This product was last offered at the strikethrough price on
    04-15-2026

    $ 433.51 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Front Control Arms
    Front Control Arm Bushings
    Front Sway Bar End Links & Bushings
    Front Ball Joints
    New Hardware

    Show More Show Less


    Pierburg Full Aluminum Water Pump With Hardware
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:6091465
    Part#: 11515A05704APKT
    Back Ordered
    Sale - Save 1% $ 532.99

    This product was last offered at the strikethrough price on
    05-30-2026

    $ 526.79 USD
    Free Shipping
    Sale - Save 1%
    $ 532.99

    This product was last offered at the strikethrough price on
    05-30-2026

    $ 526.79 USD
    Free Shipping
    If your water pump is starting to fail, you may notice coolant leaks, or even hear a whining noise coming from under the hood. If you think your water pump is starting to fail, replace it as soon as you can. The main downside to an electric water pump is you may also notice nothing - nothing but overheating! Keep your eyes peeled for warning signs it may be time to replace your water pump. N54 and N55 engines are prone to water pump failure - replace every 60,000 miles. Comes with electric water pump and installation hardware. Aluminum mounting bolts are one time use. Replace every time the water pump is removed.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:1241396
    Part#: TMSN54BPKT
    Back Ordered
    $ 565.99

    This product was last offered at the strikethrough price on
    09-29-2026

    $ 564.99 USD
    Free Shipping
    $ 564.99 USD
    Free Shipping
    BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924
    Show More Show Less
    70c Low Temp Oil Thermostat Kit - N54/N55
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:30031507
    Part#: N54N55LTKT1
    Back Ordered
    Sale - Save 18% $ 152.97

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 125.58 USD
    Free Shipping on orders $49 and up
    Sale - Save 18%
    $ 152.97

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 125.58 USD
    Free Shipping on orders $49 and up

    Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

    Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

    Kit contents:

    Billet thermostat housing cover
    Replacement gasket
    Hardware
    Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
    Low temp thermostat spring

    Show More Show Less

    Mobil 1 Oil Change Kit / Inspection I
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15744015
    Part#: 11427566327KT-KT
    In Stock
    Sale - Save 6% $ 105.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 100.08 USD
    Free Shipping on orders $49 and up
    Sale - Save 6%
    $ 105.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 100.08 USD
    Free Shipping on orders $49 and up
    To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: Seven Quarts of Mobil 1 0W-40 Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
    Show More Show Less

    Oil Filter Housing Gasket Kit - N52 3.0L
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:24212294
    Part#: N52OFHGKT
    In Stock
    Sale - Save 3% $ 138.99

    This product was last offered at the strikethrough price on
    06-15-2026

    $ 134.82 USD
    Free Shipping on orders $49 and up
    Sale - Save 3%
    $ 138.99

    This product was last offered at the strikethrough price on
    06-15-2026

    $ 134.82 USD
    Free Shipping on orders $49 and up
    A leaking gasket can cause headaches down the road, usually when you least expect it. The N52 engine can suffer a particularly troublesome leak around the oil filter housing gasket. Generally seen as something to keep an eye on, this is not something that should be put off. The upgraded Bavarian Autosport gasket is made from a DuPont Viton rubber that has a higher temperature and chemical resistance than the stock gasket material. This gasket should last the lifetime of the engine without breaking down and leaking like the Genuine BMW parts do.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554529
    Part#: N5XATSKT
    In Stock
    Sale - Save 4% $ 217.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 209.71 USD
    Free Shipping
    Sale - Save 4%
    $ 217.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 209.71 USD
    Free Shipping

    Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. 

    Kit Includes:

    • Automatic transmission oil pan with integrated filter 
    • Oil pan gasket
    • Drain plug with sealing washer
    • Fill plug with sealing washer
    • 7 quarts Redline D4 automatic transmission fluid

    Fits the following BMWs:
    E84 BMW
    X1 xDrive35i
    ​E90 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission), 330i/xi, 335i/xi
    ​E91 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission)
    ​E92 BMW 328i/xi (with GA6HP19Z automatic transmission), 335i/x
    ​E93 BMW 328i (with GA6HP19Z automatic transmission),  335i
    E60 BMW 525i/xi, 528i/xi, 530i/xi, 535i/xi
    E61 BMW 525i, 530xi, 535xi
    E70 BMW X5 xDrive30i
    E71 BMW X6 35iX
    E82/88 BMW 128i(with GA6HP19Z automatic transmission), 135i (N54)
    F01/02 BMW 740i/Li
    E85/86/89 BMW Z4 3.0i/Si sDrive30i M54 N52

    Show More Show Less

    Cabin Air Filter Cover Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677543
    Part#: 64316987498-KT
    In Stock
    $ 207.99

    This product was last offered at the strikethrough price on
    08-04-2026

    $ 206.99 USD
    Free Shipping on orders $49 and up
    $ 206.99 USD
    Free Shipping on orders $49 and up
    Over time plastic parts in your engine compartment that are exposed to the elements will become brittle and break or deteriorate. Replace yours today to keep your plastic trim looking fresh.
    Packaged by Turner - Corporate Logo
    T#:558201
    Part#: E9X335RPRPKT3
    In Stock
    Sale - Save 8% $ 359.66

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 329.81 USD
    Sale - Save 8%
    $ 359.66

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 329.81 USD

    When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

    Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

    Brake components in this kit:

    • Akebono Euro Rear Brake Pads
    • Zimmerman Rear Rotors
    • New Rear Wear Sensors
    • Brand New Stainless Steel Set Screws
    • Syl-Glide Silicone Brake Lubricant 

    Fits the following BMWs:
    2006+ E9X BMW 330i/xi 335i/is/xi/d
    2012-2015 E84 BMW X1 xDrive35i

    Show More Show Less

    Brake Fluid Flush Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710809
    Part#: 007091ECS02-KT
    Ships on Nov 30, 2026
    Sale - Save 17% $ 162.31

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 135.16 USD
    Free Shipping on orders $49 and up
    Sale - Save 17%
    $ 162.31

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 135.16 USD
    Free Shipping on orders $49 and up
    Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first. A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush on your vehicle. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Pentosin Super DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench
    Show More Show Less

    Basic Cooling System Service Kit - E82/88 E9X N54 3.0L w/ Auto or DCT...
    For vehicles with automatic or DCT transmissions
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:557234
    Part#: E8XE9XN54BCKT
    Ships in 1-2 days
    $ 1,034.99

    This product was last offered at the strikethrough price on
    04-17-2026

    $ 996.99 USD
    Free Shipping
    $ 996.99 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:23847534
    Part#: F&RSERVBRAKEKT
    In Stock
    Sale - Save 4% $ 2,498.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,401.87 USD
    Sale - Save 4%
    $ 2,498.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,401.87 USD

    Upgrade your front and rear brakes effortlessly with Turner Motorsport's all-inclusive kit. This comprehensive performance brake service package offers everything you require for a seamless brake upgrade. The kit, meticulously assembled by experts, includes rotors, pads, sensors, assembly grease, and a full set of set screws for a hassle-free installation. Enhance your braking system's performance and maintain perfect harmony between components.

    Kit Includes:

    Front ECS 2-piece semi-floating cross-drilled and slotted rotors Rear ECS 2-piece semi-floating cross-drilled and slotted rotors Front and Rear ECS EP24 "Enthusiast Performance" Brake Pads Front and rear pad wear sensors Stainless steel rotor set screws Brake lubricant compound Turner Motorsport boasts a vast inventory of top-notch brake components, encompassing hoses, hard lines, fluids, hardware, and high-temperature lubricants. Find everything essential for a professional-grade brake service at Turner Motorsport.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:1241397
    Part#: TMSE90N55BPKT
    Ships in 1 day
    $ 624.99 USD
    Free Shipping
    $ 624.99 USD
    Free Shipping
    BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter
    Show More Show Less


    E9X 335i/xi N55 Build Your Own Maintenance Service Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340263
    Part#: TMS213603
    In Stock
    Starting at $ 137.54 USD
    Free Shipping
    Starting at $ 137.54 USD
    Free Shipping
    Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

    Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • replace drain bolt crush washer
    • check and empty oil catch can (if equipped)
    • reset oil service/maintenance indicator
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • MAF/airflow sensor cleaning
    • A/C microfilter/cabin filter replacement
    • brake fluid flush/bleeding with correct low viscosity fluid
    • top off power steering fluid (make sure you use the correct Pentosin fluid!)
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect spare tire or tire repair kit, and tire-changing tools
    • inspect drive belt for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    • remove intercooler hoses and check for engine oil accumulation (sign of excessive oil blow-by)
    40,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • inspect spark plug holes and valve cover for leaks (complete valve cover replacement encouraged, click here)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • check and empty oil catch can (if equipped)
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
    • differential fluid change, using Red Line 75/90 or Motul Gear300 75/90
    • for AWD cars, front differential using Red Line 75/90 or Motul Gear300 75/90 and transfer case using only Genuine BMW TF 0870
    • brake fluid flush/bleeding with correct low viscosity fluid
    • serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation) and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis (check for cracked valve cover, oil accumulating in intercooler)
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    80,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • inspect spark plug holes and valve cover for leaks (complete valve cover replacement encouraged, click here)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • check and empty oil catch can (if equipped)
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
    • differential fluid change, using Red Line 75/90 or Motul Gear300 75/90
    • for AWD cars, front differential using Red Line 75/90 or Motul Gear300 75/90 and transfer case using only Genuine BMW TF 0870
    • brake fluid flush/bleeding with correct low viscosity fluid
    • serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • complete chassis inspection, including: front upper and lower control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper and lower shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis (check for cracked valve cover, oil accumulating in intercooler)
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    • carbon and oil accumulation in cylinder head (walnut or chemical blast to remove deposits)
    • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

    You may also want to pick up these other helpful items:
  • E90/E92 Bentley Service Manual
  • We offer many DIY-related tools, specifically for the E90 owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
    This package fits the following BMWs:
    2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
    2011-2013 E93 BMW 335i - Convertible



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    BMW E6X / E8X / E9X / Z4 Cam Bearing Ledge Replacement Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:21703017
    Part#: N54CAMBRINGKT
    Ships Today
    $ 1,663.66 USD
    Free Shipping on orders $49 and up
    Maintaining your BMW E6X, E8X, E9X, or Z4 engine health is paramount to ensure optimal performance and longevity. Two crucial components that require periodic attention are the cam bearing ledge and valve cover gasket. Regular servicing of these components, along with other critical elements such as the camshaft O-ring, chain tensioner (with gasket), and oil filter, is imperative to keep your BMW running smoothly. Included in Kit: 1 - Cam Bearing Ledge - Exhaust 29 - Torx Bolt 1 - Genuine Cam Bearing Ledge - Intake 1 - Genuine Cam Bearing Ledge - Exhaust 1 - Valve Cover Gasket 4 - Genuine Camshaft O-rings 7 - Genuine BMW TwinPower Turbo 5W-30 Engine Oil 1 - Assembly Lube 1 - Chain Tensioner - With Gasket Ring 1 - Hengst Oil Filter 2 - Collar Screws Cam Bearing Ledge: The cam bearing ledge is vital for proper camshaft support and lubrication. Over time, wear and tear can compromise its effectiveness, potentially leading to camshaft damage. Servicing this component ensures that your camshaft operates optimally, preventing costly repairs. Valve Cover Gasket: A well-maintained valve cover gasket is essential to prevent oil leaks and maintain proper sealing in the engine. Ignoring gasket issues can lead to oil contamination, loss of engine performance, and even engine damage. Camshaft O-Ring: The camshaft O-ring helps maintain proper oil pressure and prevents oil leakage. A deteriorated O-ring can result in oil seepage, leading to lubrication issues that affect engine performance and longevity. Chain Tensioner (with Gasket Ring): Proper timing chain tension is crucial for engine synchronization. Servicing the chain tensioner and its gasket ensures correct timing, preventing potential engine misfires and damage. Oil Filter: Regularly replacing the oil filter is fundamental to maintaining clean engine oil. Clean oil is essential for lubrication and heat dissipation, safeguarding the engine against wear and tear. Kit is for these BMW models: E60 / E61 - N54 3.0L E82 / E88 - N54 3.0L E90 / E92 / E93 - N54 3.0L Z4 - N54 3.0L
    Show More Show Less