Find Parts That Fit Your Vehicle

Cylinder Head

BMW makes their cylinder heads from aluminum. While this is beneficial for many reason, they do not react well to overheating. Especially prevalent on older BMW engines, and over-temp situation has been known to cause the head to warp. Turner Motorsport carries Genuine BMW replacement heads and parts to make your next rebuild a success.

Sub-Categories

Sort By:

VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
In Stock
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
VAC Motorsports - Corporate Logo
T#:1061441
Part#: ARP-HSK-N54
Ships in 3 Business Days
$ 554.99 USD
Free Shipping
$ 554.99 USD
Free Shipping
Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.
Show More Show Less
Genuine MINI - Corporate Logo
T#:405907
Part#: 11127560274
In Stock
22% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD
Free Shipping
22% off MSRP
$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD
Free Shipping

Genuine MINI - Corporate Logo
T#:15777325
Part#: 11122470427
Ships in 6 Business Days
6% off MSRP $ 4,526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,234.99 USD
Free Shipping
6% off MSRP
$ 4,526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,234.99 USD
Free Shipping

Introducing the Genuine Mini Cylinder Head (Part Number: 11122470427) for your Mini Cooper – the ultimate solution to enhance your engine's performance and reliability.

Precision-engineered to exacting standards, this cylinder head is an authentic replacement part from Genuine Mini, ensuring seamless compatibility and a perfect fit for your Mini Cooper. Crafted with the utmost attention to detail, it's designed to deliver exceptional combustion efficiency, improving power output and fuel economy.

Whether you're looking to replace a worn-out cylinder head or boost your Mini Cooper's performance, this Genuine Mini Cylinder Head is the ideal choice. Rest assured that you're investing in a top-quality component that meets the highest industry standards, backed by the reputation of Genuine Mini for excellence.

Upgrade your Mini Cooper's engine with the Genuine Mini Cylinder Head (Part Number: 11122470427) and experience the perfect balance of performance, durability, and reliability. It's time to unleash the full potential of your Mini Cooper with this authentic and high-quality component.

Show More Show Less

VAC Motorsports - Corporate Logo
T#:1061435
Part#: ARP-RBS-M20
Ships on Aug 5, 2026
$ 314.99 USD
Free Shipping
$ 314.99 USD
Free Shipping
ARP, the world’s leader in fastener technology. There is no substitute for the best! Planning to boost your M20? Building a high HP stroker engine? This rod bolt kit is for you! This kit provides higher strength, more clamping power, and the option to re-use the hardware unlike your OEM bolts. We run these in many of our own builds as well and are 110% satisfied with the fit and finish of these ARP bolts. We offer a 53mm UHL version for those running OEM M20 rods or a 44mm UHL version for those who have upgraded to S50/S52 OEM rods.
Show More Show Less
Genuine MINI - Corporate Logo
T#:33527
Part#: 11257566019
Special Order: No Guaranteed ETA
10% off MSRP $ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD
Free Shipping
10% off MSRP
$ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD
Free Shipping
Genuine MINI MAHLE PISTON
Fits BMW Engines including:
N14


Schrick - Corporate Logo
T#:359938
Part#: 086311700KT
Ships on Nov 5, 2026
$ 833.52 USD
Free Shipping
$ 833.52 USD
Free Shipping
One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.
Show More Show Less
OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591661
Part#: 11337548690
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Hydraulic valve lifter

OEM INA Hydraulic Lifter - BMW M5X S5X M62 S62
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:360996
Part#: 11321748884
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Stock replacement hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts. This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe
Show More Show Less

Genuine MINI - Corporate Logo
T#:29902
Part#: 07147543890
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up

Ensure the secure assembly of components in your Mini with the Genuine MINI Hex Bolt With Washer - 07147543890. This high-quality bolt and washer combination is designed specifically for Mini vehicles, providing reliability and peace of mind for various automotive applications.

  • Genuine OEM part ensures compatibility and fitment
  • High-quality construction for durability and longevity
  • Designed to meet Mini's specifications and standards
  • Ideal for various assembly and maintenance tasks in your Mini
Genuine MINI HEX BOLT WITH WASHER
Show More Show Less
Ina - Corporate Logo
T#:596290
Part#: 11337605330
In Stock
$ 9.99 USD
Free Shipping on orders $49 and up
If your BMW has noisy or stuck lifters, replace them to improve performance and stop the annoying chatter
Ina - Corporate Logo
T#:41492602
Part#: 11337559797
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Rocker arms work in conjunction with your camshafts and valves, applying pressure from the camshaft to open and close your intake and exhaust valves. If your rocker arm rollers have failed, this can lead to extreme camshaft damage, requiring the camshaft to be replaced. Replace your rockers whenever servicing your camshafts or replacing your hydraulic lifters to ensure long-term engine reliability.
Show More Show Less


Genuine MINI - Corporate Logo
T#:407348
Part#: 11377539969
Ships in 4 Business Days
7% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping
7% off MSRP
$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping
Genuine MINI - Corporate Logo
T#:512533
Part#: 11377539970
Ships in 6 Business Days
7% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping
7% off MSRP
$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping
Genuine MINI - Corporate Logo
T#:516854
Part#: 11377539967
Special Order: No Guaranteed ETA
7% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up

Genuine MINI - Corporate Logo
T#:407346
Part#: 11377539966
Special Order: No Guaranteed ETA
7% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up

Genuine MINI - Corporate Logo
T#:30164603
Part#: 11122470430
Special Order: No Guaranteed ETA
6% off MSRP $ 4,994.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,672.99 USD
6% off MSRP
$ 4,994.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,672.99 USD

Genuine MINI N18 1.6L Cylinder Head is an essential component for optimizing engine performance in your MINI vehicle. This cylinder head replacement is designed to restore power and efficiency to your MINI's 1.6L engine, ensuring reliable operation and longevity. Engineered to OEM specifications, it guarantees a perfect fit and seamless integration with the engine block, making it an ideal choice for MINI owners looking to maintain or enhance their vehicle's performance.

  • Restores power and efficiency to MINI N18 1.6L engines
  • Ensures reliable operation and longevity
  • Engineered to OEM specifications for perfect fit
  • Essential component for engine restoration
Show More Show Less
Ina Rocker Arm - E28, E30, E34
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:557719
Part#: 11331271429
Back Ordered
$ 26.99 USD
Free Shipping on orders $49 and up
Broken rocker arms are a real concern. Replace your broken arm or preventatively replace all of them.