Find Parts That Fit Your Vehicle

BMW Seat Belts and Racing Harnesses

The advantage of racing harnesses cannot be understated. Aside from the obvious improvement to your safety, harnesses keep your body planted in the seat and allow a much more confident and focused driving experience. Without your body strapped in you're constantly fighting to keep youself planted in the seat and these forces distract you from controlling the car. It also prevents you from getting and maintaining the ideal leverage point for working the steering wheel and pedals. Turner Motorsports offers several harness and seat belt accessories to make the use of harness belts easier.

E46 Schroth Quick Fit Pro Harnesses
E46 Schroth Quick Fit Pro Harnesses
There are many benefits to installing harnesses in your E...
Schroth - Corporate Logo
T#:390805
Part#: SCR18-E46
In Stock
Starting at $327.75
Free Shipping
Starting at $327.75
Free Shipping

There are many benefits to installing harnesses in your E46 -

  • maintain a proper driving position
  • keep you planted in the seat and not bracing with your left leg or shoulder
  • lower lap times thanks to improved driver confidence
  • advanced technology is safer than standard 3-point belts
  • Schroth Quick-Fit harness integrates with standard tensioner and airbag logic
  • Quick Fit Pro tested and approved with HANS device

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Schroth Quick Fit Pro tuning harnesses are the most advanced 4-point safety belt on the market. They are perfect for daily street or dual-duty street-track use. Quick Fit Pro harnesses mount with the existing female belt receptacles and the reinforced seat belt anchor points in the chassis. By using the standard receptacles the vehicle's SRS system remains active, adjusting airbag deployment and tensioner response accordingly. Other harnesses that do not clip into the stock belt recepacles may not integrate with the SRS with potentially harmful results. On factory BMW systems the SRS also employs a pyrotechnic charge that automatically tightens the belt in anticipation of a crash. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Schroth has revolutionized the racing and tuning harness industry which is why you will find their safety belts on everything from rally cars to military helicopters.

Quick Fit and Quick Fit Pro harnesses are vehicle-specific with the correct anchor points and seat belt clips included. The main harness is easily un-clipped and removed from the car with almost no trace left behind. Quick Fit and Quick Fit Pro use different latch types with the Pro being compatible with a HANS device and a slightly better and safer overall design. All Schroth Quick Fit harnesses are TUV approved and meet US DOT seatbelt regulations.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

QuickFit Pro Harness Summary:

  • Suggested Use: track, autocross, daily driver
  • Shoulder Belt: 2" pull down
  • Lap Belt: 2" pull down
  • Buckle: FE cam lock push button
  • Installation: click in/click out with stock receptacles; partial permanent bolt-in
  • Seat Compatability: approved only for stock seats
  • HANS compatible? Yes.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

Genuine BMW Hand, Belt Extender, Left - 72117330781 - E92
Genuine BMW Hand, Belt Extender, Left - 72117330781 - E92
Genuine BMW Hand, Belt Extender, Left -This item fits th...
Genuine BMW - Corporate Logo
T#:157991
Part#: 72117330781
In Stock
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up


Genuine BMW Hand, Belt Extender, Left -
This item fits the following BMW Chassis:
E92

Genuine BMW Seat Belt Guide - 52107009662 - E46,E46 M3
Genuine BMW Seat Belt Guide - 52107009662 - E46,E46 M3
Genuine BMW Seat Belt GuideThis item fits the following B...
Genuine BMW - Corporate Logo
T#:10331
Part#: 52107009662
In Stock
$6.82
Free Shipping on orders $99 and up


Genuine BMW Seat Belt Guide
This item fits the following BMW Chassis:
E46 M3,E46


BMW Motorsport Seat Belt Shoulder Pad Set
BMW Motorsport Seat Belt Shoulder Pad Set
These original BMW Motorsport shoulder pads fit over any ...
Genuine BMW - Corporate Logo
T#:340352
Part#: MSBELT50MM
In Stock
Sale - Save 26% $99.95
Starting at $73.59
Free Shipping
Sale - Save 26% $99.95
Starting at $73.59
Free Shipping
These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.

Genuine BMW Hand, Belt Extender, Right - 72117330782 - E92
Genuine BMW Hand, Belt Extender, Right - 72117330782 - E92 ...
These can break and fail to hold the seat belt forward. R...
Genuine BMW - Corporate Logo
T#:157992
Part#: 72117330782
In Stock
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up

These can break and fail to hold the seat belt forward. Replace it with a brand new OE BMW


Genuine BMW Hand, Belt Extender, Right -
This item fits the following BMW Chassis:
E92

Schroth Adjusting Grips - 2"
Schroth Adjusting Grips - 2"
Schroth harness grips slide into the ends of your Schroth...
Schroth - Corporate Logo
T#:390773
Part#: SR00092
In Stock
$15.95
$15.95
Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Schroth Grips make life easier and pit stops quicker! An accessory that you really can't live without. Sold per harness for both shoulder and both lap belts (4 Grips total). Fits Schroth 2" harnesses only.

Genuine BMW Harman Kardon Amplifier - F3X F80/82/83 (07/2015+)
Genuine BMW - Corporate Logo
T#:526855
Part#: 65129393194
In Stock
9% off MSRP $1,333.45
$1,217.54
Limited Qty Sale
Free Shipping on orders $99 and up
9% off MSRP $1,333.45
$1,217.54
Limited Qty Sale
Free Shipping on orders $99 and up
Genuine BMW Hand, Belt Extender, Left - 72119144937 - E92
Genuine BMW Hand, Belt Extender, Left - 72119144937 - E92
This often break over time due to their plastic design. R...
Genuine BMW - Corporate Logo
T#:158478
Part#: 72119144937
In Stock
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up

This often break over time due to their plastic design. Replace yours with a Genuine BMW Belt Extender to restore the ease of seat-belt use.


Genuine BMW Hand, Belt Extender, Left -
This item fits the following BMW Chassis:
E92


Genuine BMW Hand, Belt Extender, Right - 72119144938 - E92
Genuine BMW Hand, Belt Extender, Right - 72119144938 - E92 ...
These often break and no longer hold the seat belt forwar...
Genuine BMW - Corporate Logo
T#:158479
Part#: 72119144938
In Stock
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up
17% off MSRP $84.94
$70.56
Free Shipping on orders $99 and up

These often break and no longer hold the seat belt forward. Replace it with an OE BMW Seat belt extender to easily reach the seat belt again.


Genuine BMW Hand, Belt Extender, Right -
This item fits the following BMW Chassis:
E92


Racing Seat Belt Harness Retaining Guide Collars (Pair)
Racing Seat Belt Harness Retaining Guide Collars (Pair)
These little guys are one of our favorite final touches o...
Turner Motorsport - Corporate Logo
T#:339005
Part#: TIN9903150
In Stock
Starting at $79.90
Free Shipping on orders $99 and up
These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
Schroth Racing 2 Inch Harness Pads
Schroth Racing 2 Inch Harness Pads
Cushioned pads that cover the 2" shoulder belts ...
Schroth - Corporate Logo
T#:390796
Part#: SR-2IN-PADS
In Stock
Starting at $31.95
Starting at $31.95
Cushioned pads that cover the 2" shoulder belts so they don't dig into your shoulders. These pads simply cover the belts and fasten with a zipper. Available in multiple colors with a "Schroth Racing" patch sewn on (flip the pad over if you don't want the logo showing). These can even be used on stock 3-point seatbelts to prevent the belt from rubbing against your neck. Sold as a pair of pads (enough to fit one racing harness).
RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Ap...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
In Stock
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration


E46 Schroth Quick Fit Harnesses
E46 Schroth Quick Fit Harnesses
There are many benefits to installing harnesses in your E...
Schroth - Corporate Logo
T#:390641
Part#: SCR16-E46
Direct Ship
Starting at $234.95
Free Shipping
Starting at $234.95
Free Shipping

There are many benefits to installing harnesses in your E46 -

  • maintain a proper driving position
  • keep you planted in the seat and not bracing with your left leg or shoulder
  • lower lap times thanks to improved driver confidence
  • advanced technology is safer than standard 3-point belts
  • Schroth Quick-Fit harness integrates with standard tensioner and airbag logic

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Schroth Quick Fit line of tuning harnesses are the most advanced 4-point safety belt on the market. They are perfect for daily street or dual-duty street-track use. Quick Fit harnesses mount with the existing female belt receptacles and the reinforced seat belt anchor points in the chassis. By using the standard receptacles the vehicle's SRS system remains active, adjusting airbag deployment and tensioner response accordingly. Other harnesses that do not clip into the stock belt recepacles may not integrate with the SRS with potentially harmful results. On factory BMW systems the SRS also employs a pyrotechnic charge that automatically tightens the belt in anticipation of a crash. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Schroth has revolutionized the racing and tuning harness industry which is why you will find their safety belts on everything from rally cars to military helicopters.

Quick Fit and Quick Fit Pro harnesses are vehicle-specific with the correct anchor points and seat belt clips included. The main harness is easily un-clipped and removed from the car with almost no trace left behind. Quick Fit and Quick Fit Pro use different latch types with the Pro being compatible with a HANS device and a slightly better and safer overall design. All Schroth Tuning harnesses are TUV approved.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

QuickFit Harness Summary:

  • Suggested Use: track, autocross, daily driver
  • Shoulder Belt: 2" pull down
  • Lap Belt: 2" pull down
  • Buckle: Rallye push button
  • Installation: click in/click out with stock receptacles; partial permanent bolt-in
  • Seat Compatability: approved only for stock seats
  • HANS compatible? No.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

E90 Schroth Quick Fit Harnesses
E90 Schroth Quick Fit Harnesses
There are many benefits to installing harnesses in your E...
Schroth - Corporate Logo
T#:390639
Part#: SCR16-E90
Direct Ship
Starting at $234.95
Free Shipping
Starting at $234.95
Free Shipping

There are many benefits to installing harnesses in your E90 -

  • maintain a proper driving position
  • keep you planted in the seat and not bracing with your left leg or shoulder
  • lower lap times thanks to improved driver confidence
  • advanced technology is safer than standard 3-point belts
  • Schroth Quick-Fit harness integrates with standard tensioner and airbag logic

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Schroth Quick Fit line of tuning harnesses are the most advanced 4-point safety belt on the market. They are perfect for daily street or dual-duty street-track use. Quick Fit harnesses mount with the existing female belt receptacles and the reinforced seat belt anchor points in the chassis. By using the standard receptacles the vehicle's SRS system remains active, adjusting airbag deployment and tensioner response accordingly. Other harnesses that do not clip into the stock belt recepacles may not integrate with the SRS with potentially harmful results. On factory BMW systems the SRS also employs a pyrotechnic charge that automatically tightens the belt in anticipation of a crash. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Schroth has revolutionized the racing and tuning harness industry which is why you will find their safety belts on everything from rally cars to military helicopters.

Quick Fit and Quick Fit Pro harnesses are vehicle-specific with the correct anchor points and seat belt clips included. The main harness is easily un-clipped and removed from the car with almost no trace left behind. Quick Fit and Quick Fit Pro use different latch types with the Pro being compatible with a HANS device and a slightly better and safer overall design. All Schroth Tuning harnesses are TUV approved.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

QuickFit Harness Summary:

  • Suggested Use: track, autocross, daily driver
  • Shoulder Belt: 2" pull down
  • Lap Belt: 2" pull down
  • Buckle: Rallye push button
  • Installation: click in/click out with stock receptacles; partial permanent bolt-in
  • Seat Compatability: approved only for stock seats
  • HANS compatible? No.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

E92 Coupe Schroth Quick Fit Pro Harnesses
E92 Coupe Schroth Quick Fit Pro Harnesses
There are many benefits to installing harnesses in your E...
Schroth - Corporate Logo
T#:390803
Part#: SCR18-E92
Direct Ship
Starting at $365.00
Free Shipping
Starting at $365.00
Free Shipping

There are many benefits to installing harnesses in your E92 -

  • maintain a proper driving position
  • keep you planted in the seat and not bracing with your left leg or shoulder
  • lower lap times thanks to improved driver confidence
  • advanced technology is safer than standard 3-point belts
  • Schroth Quick-Fit harness integrates with standard tensioner and airbag logic
  • Quick Fit Pro tested and approved with HANS device

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Schroth Quick Fit Pro tuning harnesses are the most advanced 4-point safety belt on the market. They are perfect for daily street or dual-duty street-track use. Quick Fit Pro harnesses mount with the existing female belt receptacles and the reinforced seat belt anchor points in the chassis. By using the standard receptacles the vehicle's SRS system remains active, adjusting airbag deployment and tensioner response accordingly. Other harnesses that do not clip into the stock belt recepacles may not integrate with the SRS with potentially harmful results. On factory BMW systems the SRS also employs a pyrotechnic charge that automatically tightens the belt in anticipation of a crash. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Schroth has revolutionized the racing and tuning harness industry which is why you will find their safety belts on everything from rally cars to military helicopters.

Quick Fit and Quick Fit Pro harnesses are vehicle-specific with the correct anchor points and seat belt clips included. The main harness is easily un-clipped and removed from the car with almost no trace left behind. Quick Fit and Quick Fit Pro use different latch types with the Pro being compatible with a HANS device and a slightly better and safer overall design. All Schroth Quick Fit harnesses are TUV approved and meet US DOT seatbelt regulations.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and i