Find Parts That Fit Your Vehicle

Sockets

A complete garage has every socket the enthusiast would need to tackle any job. If someone is starting their collection, adding to it, or replacing old tools, everything they would need is on this page. Our complete socket kits, wrenches, specialty sockets, and more tools to maintain any BMW or install brand new performance parts are all in one place.

VANOS Solenoid 32mm Socket - E39 540i, E38 740i, E53 X5 4.4 (M62TU)
Genuine BMW - Corporate Logo
T#:14260
Part#: 83300493363
Ships in 1 day
$71.01
Free Shipping on orders $99 and up
On the M62TU engine the VAN0S solenoids on both banks are buried behind the timing covers. This makes it impossible to use a wrench on them. They're also an extra-large 32mm hex size which most people won't have in their toolbox. This socket is the factory BMW tool for removing the solenoids in the M62TU. It's a thin wall for easy access in the timing cover and a 1/2" drive.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Schwaben Water Pump Pulley Holder for Removal of Fan Clutch
Schwaben - Corporate Logo
T#:362357
Part#: 001170SCH01A
In Stock
Sale - Save 25% $24.95
$18.71
Free Shipping on orders $99 and up
Sale - Save 25% $24.95
$18.71
Free Shipping on orders $99 and up
Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
Schwaben 14mm Deep Well Spark Plug Socket - 3/8" Drive
Schwaben - Corporate Logo
T#:373727
Part#: 001247SCH01A
In Stock
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up

When it comes to replacing the spark plugs on a N54 or N55 engine you may have already noticed the standard small spark plug socket is a bit to big. This socket is a more affordable option for your weekend tune-up.

Features:

  • BMW N54 and N55 3.0 liter engines
  • MINI Gen 2 (R55, R56, R57 & R60+) Models
  • 14mm 12-point socket
  • 3.5" long socket
  • Internal magnet to retain the spark plug
  • knurled grip

Don't attempt an N54/N55 spark plug replacement with a conventional spark plug socket!


Schwaben Strut Nut Socket - 19mm
Schwaben - Corporate Logo
T#:362740
Part#: 003046SCH01A-02
In Stock
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Schwaben Strut Nut Socket - 22mm
Schwaben - Corporate Logo
T#:362742
Part#: 003046SCH01A-04
In Stock
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
M6x1.0 Rivnut Installation Tool
Bremmen Parts - Corporate Logo
T#:401281
Part#: 09331786
In Stock
Sale - Save 10% $14.95
$13.46
Free Shipping on orders $99 and up
Sale - Save 10% $14.95
$13.46
Free Shipping on orders $99 and up
A simple design used to install rivnuts .

Schwaben Strut Nut Socket - 21mm
Schwaben - Corporate Logo
T#:362741
Part#: 003046SCH01A-03
In Stock
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
Schwaben Strut Nut Socket - 18mm
Schwaben - Corporate Logo
T#:362739
Part#: 003046SCH01A-01
In Stock
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Schwaben Automatic Center Punch
Schwaben - Corporate Logo
T#:361300
Part#: PMJ-845
In Stock
Sale - Save 25% $9.95
$7.46
Free Shipping on orders $99 and up
Sale - Save 25% $9.95
$7.46
Free Shipping on orders $99 and up

One hand operation makes this center punch a valued addition to any tool box.

Center punching any flat metal surface keeps your drill bit from wandering and puts the hole where you want it.

Features:

  • Knurled punch handle
  • Press it against the metal to be drilled, and an internal, spring-loaded hammer center punches the metal, placing a small dimple in the surface
  • Especially useful when working in locations where you do not have room to swing a hammer.
  • All metal construction: 5 inches long; A1/2 inch in diameter.

aEUR<


Schwaben 7/8"(22mm) Flexible Oxygen Sensor Wrench
Schwaben - Corporate Logo
T#:368923
Part#: FO-78
In Stock
Sale - Save 25% $29.95
$22.46
Free Shipping on orders $99 and up
Sale - Save 25% $29.95
$22.46
Free Shipping on orders $99 and up

The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.

Features:

  • Premium chrome plated
  • Slotted socket head that slips over the sensor wire
  • Long angled handle for leverage

Schwaben Long Reach Protecta Socket Kit - 3 Pieces
Schwaben - Corporate Logo
T#:385658
Part#: PPS-1721LC
In Stock
Sale - Save 25% $45.95
$34.46
Free Shipping on orders $99 and up
Sale - Save 25% $45.95
$34.46
Free Shipping on orders $99 and up

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

  • Coated six-point long reach deep-well impact sockets
  • Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
  • 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben A1/2-inch torque wrench for a complete wheel fastener solution.

Schwaben 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench
Schwaben - Corporate Logo
T#:361021
Part#: DO-3236
In Stock
Sale - Save 25% $19.95
$14.96
Free Shipping on orders $99 and up
Sale - Save 25% $19.95
$14.96
Free Shipping on orders $99 and up

Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport tech's use!

Features:

  • Made of Chrome Vanadium Steel for strength
  • 32/36mm open end sides



Schwaben BMW Belt Tensioner Tool - N54/N55
Schwaben - Corporate Logo
T#:387204
Part#: 020023SCH01A
In Stock
Sale - Save 25% $41.95
$31.46
Free Shipping on orders $99 and up
Sale - Save 25% $41.95
$31.46
Free Shipping on orders $99 and up

Featuring a T60 Torx head, the belt tensioner found on the N54/N55 engine has exceptionally tight quarters. Use of this tool will allow access to the lock pin hole without excessive component removal, making belt removal and installation a much easier task.

This tool fits all N54/N55 powered BMW, including:
2008+ E82 BMW 135i 1M Coupe
2014+ F22 BMW M235i
2006+ E90 BMW 335i 335xi 335i xDrive - Sedan
2007+ E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007+ E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
2006-2010 E60 BMW 535i 535xi 535i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT
2011+ F10 BMW 535i 535i xDrive
2012+ F13 BMW 640i
2009+ F01 BMW 740i 740li
2011+ F25 BMW X3 xDrive35i
2007-2013 E70 BMW X5 xDrive35i
2007-2014 E71 BMW X6 xDrive35i
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

Schwaben 1/2" Drive Torque Wrench - ft-lbs
Schwaben - Corporate Logo
T#:361842
Part#: TW-12450
In Stock
Sale - Save 25% $39.95
$29.96
Free Shipping on orders $99 and up
Sale - Save 25% $39.95
$29.96
Free Shipping on orders $99 and up

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

  • Reversible A1/2-inch drive click-to-stop
  • Torque range of 10 to 150 ft-lb
  • Accurate to within +/-4%
  • 18 inches in length with a convenient carry case
Schwaben Extended 17mm Wheel Stud Socket Adapter
Schwaben - Corporate Logo
T#:386434
Part#: 004351SCH01A
In Stock
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up
Sale - Save 25% $14.95
$11.21
Free Shipping on orders $99 and up

Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

Features:

  • This specially made socket features 17mm male hex on one end and 17mm socket on the other
  • Works to extend reach between wrench and lug nut
  • Keep inside your glove box so it is ready for any tire change on the road or on the track

NOTE: Not for use with impact.


Schwaben 6" Pistol Grip Locking Pliers
Schwaben - Corporate Logo
T#:383917
Part#: 014565SCH01A
In Stock
Sale - Save 25% $34.95
$26.21
Free Shipping on orders $99 and up
Sale - Save 25% $34.95
$26.21
Free Shipping on orders $99 and up

The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

Features:

  • The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
  • Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
  • Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster

Specialty Bit Kit - 100 Pieces
Schwaben - Corporate Logo
T#:361900
Part#: P-100B
In Stock
Sale - Save 25% $21.95
$16.46
Free Shipping on orders $99 and up
Sale - Save 25% $21.95
$16.46
Free Shipping on orders $99 and up

All the right bits in one box. The perfect assortment to keep the job going.

Features:

  • 10 fractional SAE hex, 9 TorxA(r) tamper-proof, 9 TorxA(r)

  • 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing

  • 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder

  • Made of hardened Chrome Vanadium steel for years of dependable use

  • Packaged in a handy blow molded case with individually marked bit slots for easy organization

Schwaben Torque-Limiting Wheel Bolt Socket Kit - 3 Pieces
Schwaben - Corporate Logo
T#:386444
Part#: PTS-12-1721
In Stock
Sale - Save 25%