Top Turner Suspension & Camber Products | E9X M3

Turner has everything you need to control body roll, manage your ride height, stiffen up and give you the adjustability you need to set up your BMW.

Front Upper and Lower Control Arm Monoball Upgrade - Left And Right -...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:386421
Part#: E9X0031313TKT
Ships on Mar 22, 2027
Sale - Save 20% $ 1,143.99

This product was last offered at the strikethrough price on
11-07-2026

$ 915.19 USD
Free Shipping
Sale - Save 20%
$ 1,143.99

This product was last offered at the strikethrough price on
11-07-2026

$ 915.19 USD
Free Shipping

M3 upper and lower control arms are a known upgrade for non-M E82 and E9X chassis. But our Monoball Thurst Arms are even more of an upgrade over the stock M3 arms. This package bundles the Turner Monoball upper thrust arms with the stock M3 lower control arms. If there's one big fail point in the E82/E9X front suspension it's the thrust arms. The front inner thrust arm bushing is filled with dampening fluid that leaks over time. Once it's gone the bushing has the strength of a rubber band. Even though we sell two types of upgraded rubber bushings there was still room for improvement. For someone looking for superior performance and longevity these sealed monoball bushings are the best out there. 

The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings, including the M3, move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. And when worn out, performance suffers. Our monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

The lower M3 control arm bushings use a similar sealed monoball bushing instead of rubber. This package gives you monoball precision and performance with OE-quality components.

This item fits the following BMWs: 
2008-2012 E82 BMW 128i 135i 1M Coupe 
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan 
2006-2012 E91 BMW 328i - Wagon 
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe 
2007-2013 E93 BMW 328i 335i M3 - Convertible 
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

Show More Show Less
Front Upper Control Arm Monoball Upgrade - Left and Right - E82, E89,...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:221983
Part#: TSUE9080QIS-ARMS
In Stock
Sale - Save 25% $ 745.99

This product was last offered at the strikethrough price on
11-07-2026

$ 559.49 USD
Free Shipping
Sale - Save 25%
$ 745.99

This product was last offered at the strikethrough price on
11-07-2026

$ 559.49 USD
Free Shipping

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

Sold as a pair for RWD models only.

Click here for installation instructions.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less
Front Upper Control Arm Bushing Set (FCAB) - Monoball - E82, E89, E90...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:221982
Part#: TSUE9080QIS
In Stock
Sale - Save 27% $ 418.99

This product was last offered at the strikethrough price on
11-07-2026

$ 307.49 USD
Free Shipping
Sale - Save 27%
$ 418.99

This product was last offered at the strikethrough price on
11-07-2026

$ 307.49 USD
Free Shipping

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

Features:

Bearing housing

  • Precision CNC machined from 6061-T6 blue anodized aluminum
  • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
  • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

  • OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

  • Nearly instantaneous, crisp steering and braking response.
  • Maintenance free, long lasting performance. 
  • Improved road feel without undesirable NVH.

Sold as a pair for RWD models only.

Click here for installation instructions.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Turner Hybrid Camber & Caster Plates - E90 E92 E93 M3
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Featuring spherical monoball bearing for full shaft articulation!
Turner Motorsport - Corporate Logo
T#:568607
Part#: 003407TMSKT1
Back Ordered
$ 629.99 USD
Free Shipping
$ 629.99 USD
Free Shipping
One of the tricks for getting your E9X M3 to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber, there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should. Designed in-house for the highest quality and versatility possible, we are confident our Hybrid Camber Plates are the perfect solution for your BMW M3! The first requirement we had envisioned for our plates is wide adjustability while the struts are still installed. This is to ensure that your suspension can be dialed in for either street or track without any issues. Our plates offer 3+ degrees of camber adjustment and 2.5+ degrees of caster adjustment. The next key feature of our camber plates is long term reliability. To achieve this, maintenance free, PTFE lined, stainless steel spherical monoballs were utilized along with replaceable 80A polyurethane bushings, giving these plates a long bearing life and reduced NVH. To further increase longevity, the bearing design features upper and lower seals to keep out moisture and contaminants. The final and most important design requirement was how these plates worked specifically with the E9X M3. To guarantee these plates were the best choice for your BMW, we designed these camber plates with as large of a surface area as possible to ensure even distribution of forces throughout the strut tower, preventing common mushrooming or cracking of the thin OE steel mounting location. We managed to accomplish this by staying close to the original suspension geometry, adding 13.5mm of height to the stock shock pin position and only 3.5mm overall to ride height. This ended up further benefitting vehicles with lowered suspension by improving shock travel distance and reducing the risk of bottoming out. These camber plates are fully compatible with OEM bump stops, factory style springs. and include hardware that accommodates both square seat and tapered seat shock pins. Features and Specifications: Camber adjustment range: 3+ degrees Caster adjustment range: 2.5+ degrees Wide plate offering superior load distribution Bolt rings: powder coated steel with 10.9 zinc plated knurled studs Housing constructed from 6061-T6 alloy with type 2 black anodizing 13.5mm higher shock pin position for longer travel OEM bump stop compatible Utilizes OEM spring perch pillow ball bearing 31331090612 Compatible with square and taper seat shock pins Race & stock spring compatible FK FKSSX12T Maintenance free, PTFE lined, stainless steel spherical bearing Bearing isolated by replaceable 80A polyurethane bushings Upper and lower sealed bearings
Show More Show Less

E82, E9X Front Strut Tower Reinforcement Plates (Pair)
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:2720
Part#: TSU9075STR
In Stock
Sale - Save 40% $ 89.99

This product was last offered at the strikethrough price on
11-07-2026

$ 53.99 USD
Free Shipping
Sale - Save 40%
$ 89.99

This product was last offered at the strikethrough price on
11-07-2026

$ 53.99 USD
Free Shipping
Made in the USA Help preserve the structural integrity of your BMW E82 1-series, or E90, E91, E92, or E93 3-series with these weld-in strut tower reinforcement plates. Deformation of the front upper strut tower has been common problem, especially in race-prepped cars, cars with lowered suspensions, any car that sees track use, or BMWs driven on rough roads. The strut tower deforms from suspension bottoming out, forces generated by the spring/shock assembly, and that forced concentrated in a relatively small area on the strut tower. The strut tower will exhibit deforming by cracking (especially around the stud holes), or "mushrooming" where the tower takes on a dome-shaped top instead of being flat. By thickening the sheetmetal material of the tower, you are making it stronger and more robust to prevent deformation. While the E82 and E9x cars are newer and better made than the previous E36 and E46 cars, any suspension modification or track use will make the new cars more susceptible to this problem.

These are mounted on the underside of the strut tower and need to be welded into place.

This chassis reinforcement fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive M3
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3
2007+ E93 BMW 328i 328xi 328i xDrive 335i 335xi 335i xDrive M3
Show More Show Less
Performance Front Adjustable Swaybar End Link Set - E9x M3, E82 1 M ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:588018
Part#: 025990TMS07
In Stock
Sale - Save 3% $ 331.99

This product was last offered at the strikethrough price on
11-07-2026

$ 322.03 USD
Free Shipping
Sale - Save 3%
$ 331.99

This product was last offered at the strikethrough price on
11-07-2026

$ 322.03 USD
Free Shipping
When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!
Show More Show Less

Turner Performance Adjustable Front Lower Control Arms - E82/88 E9X ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:588023
Part#: 025990TMS02
In Stock
Sale - Save 16% $ 956.99

This product was last offered at the strikethrough price on
11-07-2026

$ 799.99 USD
Free Shipping
Sale - Save 16%
$ 956.99

This product was last offered at the strikethrough price on
11-07-2026

$ 799.99 USD
Free Shipping
Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment
Show More Show Less
Turner Adjustable Toe Arms - E82/E9X M
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:590305
Part#: 024651TMS03
In Stock
Sale - Save 10% $ 410.99

This product was last offered at the strikethrough price on
11-13-2026

Starting at $ 370.99 USD
Free Shipping
Sale - Save 10%
$ 410.99

This product was last offered at the strikethrough price on
11-13-2026

Starting at $ 370.99 USD
Free Shipping
Eliminate any unwanted movement in your rear end by eliminating the cumbersome factory eccentric toe adjustment points! This opens up a wider range of toe adjustment for your alignment needs!