E30 325i Convertible H&R Touring Cup Kit Suspension Package
- Mfg Part #
- Turner Part #
Does this fit my vehicle?
For accurate results, specify your model below.
- Matching Shock & Spring Package
- Comparable to a H&R Sport spring - mild upgrade over stock
- Improved handling with minimal impact on ride comfort
The H&R Cup Kit is great for lowering the E30 a mild amount and use a stiffer spring for better handling and appearance. These are a matching shock and spring package that delivers less bodyroll while still retaining ride comfort for everyday driving.
H&R Touring Cup Kit springs lower the ride height as much as 1.4" in front and 0.75" in the rear and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs. Lowering amount will be less if replacing the factory sport suspension. This package fits with the stock strut and shock mounts, making for an easy and clean install.
This H&R Cup Kit is a tuned shock/spring package for the E30 325i Cabrio. H&R matches a set of springs to performance shocks for a perfectly setup and functioning suspension package. Instead of mixing and matching springs with shocks, H&R has tailored each shock for the specific model, taking into account spring rates, chassis setup, and suspension motions. Without the shocks and springs working together the suspension may have incorrect travel or be a mis-match for spring rate (under-dampened) or too stiff. This E30 Cup Kit addresses all of that.
This item fits the following BMWs:
1987-1992 E30 BMW 325ic Convertible
This Part Fits the Following BMWs