Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Engines make more power when you're able to move as much air and fuel as possible through them. However, air density is just as important as air volume. Cooler air is denser air, so in addition to keeping your engine cool, it's important to make sure that your intake charge is as cool as possible. Turner Motorsport's upgraded intercooler works to reduce air temperatures with a bare minimum of pressure drop. Less pressure drop means less restriction, and a turbocharger that doesn't have to work as hard. This results not only in a longer service life for your turbocharger, but a substantial increase in performance as well.
The stepped design increases volume and surface are in a limited space by adding an additional smaller core at the top of the intercooler. Both cross sectional area and frontal surface area are increased by a whopping 56%, with a design that still weighs under 20 pounds. On the stock intercooler, the temperature differential between the inlet and outlet sides of the intercooler represented a 95 degree drop. With the Turner Motorsport intercooler, that drop was increased to a chilling 140 degrees. The dyno results don't lie: as a bolt-in upgrade, expect gains of 18 wheel horsepower and 10 lb/ft of torque. With a tune and supporting modifications, further gains are possible, up to 36 horsepower and 28 lb/ft of torque.
This cast aluminum intercooler features an attractive, easy to clean matte black finish, with etched Turner logos on the front and bottom. If you're looking for the ultimate cooling system upgrade for your turbo BMW, look no further.
Upgrade to the following OE Intercoolers: 17517600531, 17517600530, 17517618809
Fits the Following BMWs:
F22 F23 228i 228i M235i M235ix
F30 F31 F32 F33 F34 F36 328i 328ix 335i 335ix 428i 428ix 435i 435ix
Wagner Competition intercoolers (#200001071) are engineered in Germany to be a superior N20/N55 intercooler than the factory part. With 85% more surface area and 90% more volume than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss.
This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core!
Compared to the stock OEM intercooler:
One of the best features of this kit is that it's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the F30 335! Fits both N20 and N55 cars.
Size Comparison
LDH
Wagner Performance 520mm x 215mm x 145mm /stepped with a 13.8cm flow rate weighing 8.6 grams
stock OEM 510mm x 130mm x 110mm with a 7.3 cm flow rate
This FMIC fits the following BMWs:
2014+ F22 BMW 228i M235i
2016+ F87 BMW M2
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F31 BMW 328i - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F32 BMW 428i 435i 435iX - Coupe
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
A performance intercooler is a must when looking to get the most performance possible from your vehicle. Stock intercoolers are great for daily drivers but don't quite meet the demands for airflow and cooling when used on the track. CSF is here to remedy this situation with their all new High Performance Intercooler.
CSF has built up a reputation for themselves as one of the top contenders in the aftermarket community for performance cooling. With the success of their side mounted intercoolers for the S55 engine in the F8X M3 and M4, they have shifted their focus to the N55 and N20 platform. Their designs are a tried and true method using a bar and plate, stepped core intercooler. This, combined with the naturally high build quality of CSF products, will enable this motors to freely pull a much greater amount of air into the intake all while keeping things cooler than stock. This allows the engine to build power all throughout the RPM-band without the restriction that would normally start to be seen above 4500 RPM.
Features:
Wagner Competition intercoolers (#200001046) are engineered in Germany to be a superior N20/N55 intercooler than the factory part. With 85% more surface area than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss.
This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core!
Compared to the stock OEM intercooler:
One of the best features of this kit is that it's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the F30 335! Fits both N20 and N55 cars.
Size Comparison
LDH
Wagner Competition 520mm x 210mm x 130mm
stock OEM 510mm x 130mm x 110mm
This FMIC fits the following BMWs:
2014+ F22 BMW 228i M235i
2016+ F87 BMW M2
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F31 BMW 328i - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F32 BMW 428i 435i 435iX - Coupe
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
12-29-2025
When modifying the car and increasing boost, installing an upgraded intercooler is essential to keep the engine computer from restraining boost as temperatures climb. The stock air-air intercooler is quickly overcome with heat and can't keep the intake air cool enough. If it's too hot the engine computer will reduce power to safer levels. This Dinan intercooler is a dual-core air-air design with an astounding 240% more surface area than the factory intercooler. The temperature at boost is 60% cooler at 6,250 RPM with the Dinan Dual Core compared to stock. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines. Professional installation is strongly recommended as bumper removal is required and several pieces in the front end need to be cut and trimmed. The factory charge piping in and out of the intercooler is re-used.
For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The intercooler is worth 2 points towards your Dinan badge.
Click here for full installation instructions, including fitment details. We strongly recommend reviewing these instructions prior to purchasing so you will be familiar with the small differences among models and front bumper designs.
This item fits the following BMWs:
2014+ F22 F23 BMW 228i 228iX M235i M235iX
2012-2015 F30 BMW 320i 328i 328i X-Drive 335i 335i X-Drive - Sedan
2012-2015 F31 BMW 328i X-Drive - Touring Wagon
2012-2016 F32 BMW 428i 428i X-Drive 435i 435i X-Drive - Coupe
2012-2015 F34 BMW 328i 328i X-Drive 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 428i 428i X-Drive 435i 435i X-Drive - GranCoupe
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
The Full Kit consists of everything included in the Standard Kit but adds the Turbo to Intercooler Pipe Kit (TIC Pipe). Increase throttle response, as well as decrease turbo lag, are the benefits of the new TIC Pipe Kit. With the Full Kit, ALL the factory rubber and plastic intercooler pipes will be replaced. You will have full hard piping throughout your system.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Features:
Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded turbo intercooler piping with silicone couplers
Upgraded charge pipes with silicone couplers
Installation Hardware
This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX
2012+ F31 3 Series Touring Wagon 328i 328iX
2014+ F32 4 Series Coupe 428i 428iX
2014+ F33 4 Series Convertible, 428i 428iX
2014+ F34 Gran Turismo (GT) 328i 328iX
2015+ F36 4 Series Gran Coupe 428i 428iX
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
The Full Kit consists of everything included in the Standard Kit but adds the Turbo to Intercooler Pipe Kit (TIC Pipe). Increase throttle response, as well as decrease turbo lag, are the benefits of the new TIC Pipe Kit. With the Full Kit, ALL the factory rubber and plastic intercooler pipes will be replaced. You will have full hard piping throughout your system.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Features:
Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded turbo intercooler piping with silicone couplers
Upgraded charge pipes with silicone couplers
Installation Hardware
This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX
2012+ F31 3 Series Touring Wagon 328i 328iX
2014+ F32 4 Series Coupe 428i 428iX
2014+ F33 4 Series Convertible, 428i 428iX
2014+ F34 Gran Turismo (GT) 328i 328iX
2015+ F36 4 Series Gran Coupe 428i 428iX
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
The Full Kit consists of everything included in the Standard Kit but adds the Turbo to Intercooler Pipe Kit (TIC Pipe). Increase throttle response, as well as decrease turbo lag, are the benefits of the new TIC Pipe Kit. With the Full Kit, ALL the factory rubber and plastic intercooler pipes will be replaced. You will have full hard piping throughout your system.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Features:
Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded turbo intercooler piping with silicone couplers
Upgraded charge pipes with silicone couplers
Installation Hardware
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Features:
Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded charge pipes with silicone couplers
Installation Hardware
This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX
2012+ F31 3 Series Touring Wagon 328i 328iX
2014+ F32 4 Series Coupe 428i 428iX
2014+ F33 4 Series Convertible, 428i 428iX
2014+ F34 Gran Turismo (GT) 328i 328iX
2015+ F36 4 Series Gran Coupe 428i 428iX
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Kit Includes:
1 High-density bar & plate type Competition intercooler
Installation Hardware
Features:
This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX
2012+ F31 3 Series Touring Wagon 328i 328iX
2014+ F32 4 Series Coupe 428i 428iX
2014+ F33 4 Series Convertible, 428i 428iX
2014+ F34 Gran Turismo (GT) 328i 328iX
2015+ F36 4 Series Gran Coupe 428i 428iX
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Kit Includes:
1 High-density bar & plate type Competition intercooler
Installation Hardware
Features:
This part fits the following BMWs:
2014+ F22 2 Series Coupe M235i M235iX
2014+ F23 2 Series Convertible M235i Convertible
2012+ F30 3 Series Sedan 335i 335iX
2012+ F31 3 Series Touring Wagon 335i 335iX
2014+ F32 4 Series Coupe 435i 435iX
2014+ F33 4 Series Convertible, 435i 435iX
2014+ F34 Gran Turismo (GT) 335i 335iX
2015+ F36 4 Series Gran Coupe 435i 435iX
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Features:
Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded charge pipes with silicone couplers
Installation Hardware
This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX
2012+ F31 3 Series Touring Wagon 328i 328iX
2014+ F32 4 Series Coupe 428i 428iX
2014+ F33 4 Series Convertible, 428i 428iX
2014+ F34 Gran Turismo (GT) 328i 328iX
2015+ F36 4 Series Gran Coupe 428i 428iX
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Features:
Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded charge pipes with silicone couplers
Installation Hardware
Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.
Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.
Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.
Features:
Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded charge pipes with silicone couplers
Installation Hardware
This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16" TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 21% and lowered the intake air temperatures.
End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection.
5" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory.
TIG-Welded:
100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks.
Pressure Tested:
The BladeRunner Intercooler is test pressure rated at 200psi.
Cold Side Tube:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion. Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.
Perfect Fit:
Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.
Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (turbo) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (turbo) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20
Note: This intercooler kit is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.
Reinforced Silicone:
These couplings feature high temperature 5-Ply polyester reinforced silicone material which meet or exceed SAEJ20 Standard.
Durable Couplings:
Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipe or other equipment break.
Note: This coupling kit fits aFe intercooler tube (46-20239-B, 46-20229-B/R, 46-20222-B) Only.