Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This category contains parts that fit the following chassis:
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex BMW E21 Rear Axle Carrier Mount Bushing (Heritage) is a high-quality suspension upgrade for BMW E21 models, designed specifically for enthusiasts who want to retain the classic feel of their vintage car while improving its performance and durability.
This bushing is perfect for owners of classic BMW E21 models who are looking for a subtle, period-correct upgrade that enhances the car’s handling and reliability while maintaining the vintage character of the vehicle. It's ideal for daily driving and occasional performance use.
This product was last offered at the strikethrough price on
05-29-2026
This product was last offered at the strikethrough price on
07-01-2026
Standard front control arm bushing made by an OEM supplier. Price is for the pair.
For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3).
Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.
The Powerflex Front Control Arm Bushing Set (Rear Position) for the BMW i3 enhances suspension and handling.
Ideal for i3 owners looking for a durable and effective suspension upgrade.
This product was last offered at the strikethrough price on
05-29-2026
This product was last offered at the strikethrough price on
07-08-2026
Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
The BMW 1502-2002 Front Lower Arm Outer Bushing is a crucial component of the suspension system for classic BMW models produced from 1962 to 1977. This bushing connects the front lower control arm to the wheel hub, ensuring proper alignment and allowing for smooth suspension movement.
Purpose:
Material Options:
Enhanced Handling:
Compatibility:
Upgrade Potential:
Installation Considerations:
In summary, the Front Lower Arm Outer Bushing for the BMW 1502-2002 is essential for maintaining the vehicle's suspension integrity and driving characteristics. Whether replacing worn-out bushings or upgrading to polyurethane, ensuring these components are in good condition is vital for optimal performance and comfort in these classic BMWs.
The Powerflex Rear Sway Bar Bushing for the BMW E30 and 318Ti, specifically designed for a 16mm sway bar, is a vital upgrade for enhancing the vehicle's suspension performance. By replacing the factory rubber bushings with high-quality polyurethane, this product delivers significant improvements in handling, stability, and overall driving experience.
Enhanced Cornering Performance: The firmer polyurethane material reduces unwanted flex in the sway bar, leading to improved body control during cornering. This results in reduced body roll and better traction, allowing for more confident cornering at higher speeds.
Superior Durability: Unlike traditional rubber bushings that can wear out over time, Powerflex bushings are designed to withstand harsh driving conditions. They resist deterioration from heat, oil, and road debris, providing longer-lasting performance and reliability.
Improved Steering Feedback: The stiffer construction enhances the connection between the sway bar and the chassis, leading to better steering response. Drivers will enjoy a more direct feel and improved handling characteristics, making the vehicle more responsive during dynamic driving.
Easy Installation Process: These bushings are specifically designed to fit the E30 and 318Ti models with a 16mm sway bar, ensuring a direct replacement for the factory components. Installation is straightforward and requires no modifications, making it accessible for DIY enthusiasts and professionals alike.
Versatile Use: Suitable for various driving conditions, these bushings excel in both everyday driving and performance situations. They help optimize the rear suspension geometry, enhancing overall handling and improving tire contact with the road.
This upgrade is ideal for BMW E30 and 318Ti owners who want to boost their vehicle's handling and stability. The Powerflex Rear Sway Bar Bushing for the 16mm sway bar offers a reliable solution for enhancing rear suspension performance, making it a great choice for drivers seeking an improved driving experience.
This product was last offered at the strikethrough price on
07-08-2026
Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2006 - 2008 E86 Z4 3.0si Z4 M Coupe
2002 - 2008 E85 Z4 Roadster Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster
The Powerflex Front Lower Control Arm Rear Bushing for the BMW E36, E30, Z3, and Z1, featuring an aluminum shell (centered), is a high-performance component designed to improve the vehicle's front suspension dynamics. By replacing the stock rubber bushings with this robust polyurethane and aluminum design, drivers can experience enhanced handling, stability, and durability.
Increased Durability: The aluminum shell enhances the structural integrity of the bushing, making it more resistant to wear and deformation compared to traditional rubber bushings. This durability ensures long-lasting performance, even under demanding driving conditions.
Enhanced Handling Performance: The firmer polyurethane material reduces unwanted flex and movement in the control arm, leading to improved alignment and stability. This results in better cornering ability and overall handling, allowing for a more confident driving experience.
Superior Feedback and Responsiveness: By minimizing unwanted suspension movement, these bushings provide improved steering feedback, allowing drivers to feel more connected to the road. This responsiveness translates to better control during cornering and enhanced confidence during spirited driving.
Easy Installation: Specifically designed for the BMW E36, E30, Z3, and Z1 models, these bushings are a direct replacement for the factory components. The installation is straightforward, requiring no modifications, making it a user-friendly upgrade for both professionals and DIY enthusiasts.
Versatile Applications: Suitable for a wide range of driving styles, these bushings excel in both daily driving and performance scenarios. They help optimize suspension geometry, enhancing tire contact with the road and improving overall handling capabilities.
This upgrade is ideal for BMW E36, E30, Z3, and Z1 owners looking to enhance their vehicle’s front suspension performance and longevity. The Powerflex Front Lower Control Arm Rear Bushing with an aluminum shell offers a reliable solution for improving handling, stability, and driving enjoyment, making it a perfect choice for enthusiasts who demand more from their vehicles.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1999 - 2001 E46 Convertible 323ci 325ci 330ci
2002-2006 E46 Convertible 325ci 330ci
1998 - 2001 E46 323ci 325ci 330ci M3
2002 - 2006 E46 325ci 330ci
1998 - 2001 E46 Touring 323i 325i
2002 - 2006 E46 Touring 325i 325xi
1998 - 2001 E46 Sedan 320i 323i 325i 328i 330i
2002 - 2006 E46 Sedan 320i 325i 325xi 330i 330xi
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
For a BMW X3 (2003-2010), if you're looking for front anti-roll bar bushings with a 22.5mm diameter, one well-regarded aftermarket option is Powerflex. Powerflex specializes in high-quality polyurethane bushings, which are more durable than traditional rubber bushings. These bushings help improve handling by reducing unwanted flex in the suspension components.
Here’s what you should consider when getting Powerflex bushings for your BMW X3:
Material: Powerflex bushings are made from polyurethane, which offers better resistance to wear, deformation, and harsh conditions compared to OEM rubber.
Fitment: Ensure that the 22.5mm size matches the diameter of your front anti-roll bar for your specific BMW X3 variant. This size typically fits certain versions of the 2003-2010 X3 models, but it’s always good to double-check with your specific vehicle's specifications.
Improved Handling: Replacing your worn-out bushings with Powerflex ones can result in sharper handling and less body roll, especially during cornering.
These bushings are typically sold as a kit with two bushings (one for each side of the anti-roll bar), and installation may require some mechanical experience or a professional.
