click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. CATuned Big Brake Kits
  18. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Shifter Bushings
  18. Transmission Mounts
  19. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
  6. Burger Motorsports Tuning
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
  15. Remus Performance Exhaust Systems
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
  18. Fire Extinguishers and Mounts
  19. Helmets
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
  9. Universal
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Fortune Auto Coilover Kits
  7. Dinan Coilover Spring Kits
  8. Turner / H&R Height Adjustable Spring Sets
  9. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  10. H&R Coil Over Suspensions
  11. KW Coil Over Suspensions
  12. Moton Coil Overs & Race Shocks
  13. ST Suspension Coilover Kits
  14. Turner Motorsport TrackSport Coil-Over Suspension Kits
  15. Turner Motorsport Racing Suspension Kits
  16. TC Kline Racing Coil Overs
  17. Chassis Reinforcement Kits & Parts
  18. Sway Bar Kits
  19. Sway Bar Links & Sway Bar Parts
  20. Camber / Caster Kits
  21. Strut Braces & Stress Bars
  22. Control Arm Replacements & Upgrades
  23. Suspension Bushings & Mounts
  24. Wheel Bearings & Hub Assemblies
  25. Steering Racks & Power Steering Pumps
  26. Tie Rods & Steering Parts
  27. Coil Over Spring Hardware
  28. CATuned Coilover Kits
  29. AC Schnitzer Suspension Kits
  30. Sachs Performance Coil Over Suspension
  31. AST Suspension
  32. Ohlins Coilover Kits
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
  16. BBS Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Schwaben Lighting
  15. Sockets
  16. Spark Plug Sockets
  17. Transmission and Differential Tools
  18. Wheel Pin Tools
  19. Workshop Chemicals
  20. Race Ramps
  21. Fender Rollers
  22. Vehicle Lifts
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 3-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Convertible 2012+
  6. (F13) 6-Series Coupe 2012+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW Cross Drilled Rotors & Discs

BMW Cross Drilled Rotors & Discs The natural enemy of braking performance is heat. When temperature levels reach critical levels, a thin layer of gasses actually prevent the brake pads from making complete contact with the rotor friction surface. The addition of cross-drilling the friction surface promotes the evacuation of these gasses and improves stopping performance and pedal feel. TMS cross drilled rotors and AXXIS brake pads result in improved braking performance and look great too!

All TMS cross drilled rotors are made to exacting standards by the worlds leading brake manufacturers. Each part is then analyzed for its specific application and design. Engineers then determine the optimal drilling pattern to maximize stopping power. These patterns are then cut into the rotor using today's most advanced CNC machines. This level of quality control ensures that each TMS High Performance rotor will perform to the highest levels every time under all driving conditions. All TMS cross-drilled rotors feature counter-sunkholes that reduce stress risers and fractures.
For accurate results, specify your model below.
Cross-Drilled Brake Rotors - Front - E30 325e 328i 325is 325ix 318is Direct replacement FRONT cross-drilled brake discs for the E30 325e 325es 325i 325is 325ix 318is 318ic. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325is 325ic 325ix
1990-1991 E30 BMW 318i 318is 318ic
StopTech
Part #: 34111160915CD
Price: $189.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E46 330i 330Ci 330xi (pair) REAR; priced by the pair

This item fits the following BMWs:
2001-2006 E46 BMW 330i 330ci 330xi
StopTech
Part #: 34201166073CD
Price: $197.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - F10 M5 F12 M6 F06 M6 (pair) Direct replacement cross-drilled brake discs (400x36mm). These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look. These front brake discs / brake rotors fit:
2011+ F10 BMW M5
2013+ F06 BMW M6 Gran Coupe
2012+ F12 BMW M6
Not for cars with Carbon Ceramic rotors.
StopTech
Part #: 34112284101CD
Price: $1019.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E9X 335i/335Xi (pair) Direct replacement Front cross-drilled brake discs for the 2007-2010 E9X 335i and 335Xi. These rotors/discs feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

These front brake discs / brake rotors fit:
2007-2010 E90 335i, 335Xi sedan
2007-2010 E92 335i, 335Xi coupe
2007-2010 E93 335i, 335Xi convertible
StopTech
Part #: 34116770729CD
Price: $253.80 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors - Rear - E46 325i/328i (pair) REAR; price is for the pair; also fits E46 323i Touring and Convertible (these do NOT fit all wheel drive XI models)

This item fits the following BMWs:
1999-2000 E46 BMW 323i Wagon 323ci Convertible
1999-2005 E46 BMW 325i 325ci 328i 328ci
StopTech
Part #: 34211165563CD
Price: $173.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - F01 750i 750xi, F07 550i GT, 550xi GT (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2010+ F07 BMW 550i GT, 550i xDrive GT
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive B7 Alpina
StopTech
Part #: 34216775291CD
Price: $325.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E30 318, 325e/i (Pair) Rear cross-drilled rotors/discs; priced for the pair; FITS E30 318i, 325e, 325i/is only (will not fit 325iX)

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1984-1991 E30 BMW 325e 325es 325i 325ic 325is
StopTech
Part #: 34216755407CD
Price: $145.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E46 325i/328i, Z3 3.0, Z4 3.0i  (pair) Direct replacement Front cross-drilled brake discs for the E46 3 series and Z3 3.0i These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1999-2000 E46 BMW 323i Wagon, 323ci Convertible - Not for Coupe or Sedan
1999-2005 E46 BMW 325i 325ci 325xi 328i 328ci
2001-2002 Z3 BMW Z3 3.0i
2003-2006 E85 BMW Z4 3.0i
StopTech
Part #: 34111164539CD
Price: $181.80 (USD) 
Direct Ship
Quantity:   
Brake Rotor Retaining Screw / Hold Down Bolts (set of 4) - M8x14 Brake rotor retaining screws used for many BMW applications. M8x14. We recommend replacing the brake rotor hold down bolts each time the brake rotors are removed as they have a tendency to rust into place or to become stripped with multiple uses. This is for a pair of 4 bolts.

Genuine BMW
Part #: 34211161806-4
Price: $5.20 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cross-Drilled Brake Rotors - Front - E60 535i, 545i, 550i - E63 645ci, 650i (pair) Direct replacement Front cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

These front brake discs / rotors fit:
2004-2010 E60 BMW 535i 545i 550i
2004-2010 E63 BMW 645ci 650i
StopTech
Part #: 34116763824CD
Price: $245.90 (USD) 
In Stock
Quantity:   
StopTech
Part #: 34111159896cdKT
Price: $139.90 (USD) 
In Stock
Quantity:   
Gas-Slotted Brake Rotors (Pair) - Front - F30 320i, 328i, F22 228i, F32 428i gas-slotted brake discs for 2008+ E90 323i, E9X 328i/xi, E84 X1 28i. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

Slotting a rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The slots in our rotors allow the gases to escape giving better braking performance. For track and racing use, slotting is preferred over cross-drilling because the slots don't take away as much mass from the rotor and won't suffer from structural cracks. Direct replacement for BMW # 34116855006 and 34116774875.

Sold as a FRONT pair.

These front brake discs / brake rotors fit:
2014+ F22 BMW 228i 228i xDrive
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 428i 428i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe
Application note: these rotors fit cars not equipped with the factory M Sport package or M Sport brakes upgrade
StopTech
Part #: 34116792219GS
Price: $223.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E39 525i/528i/540i (pair) Rear cross-drilled rotors/discs for all E39 5-series (except M5); priced for the pair.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i
StopTech
Part #: 34211164840CD
Price: $175.80 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors - Front - F25 X3 28dx, 28ix, 35ix, F26 X4 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2011+ F25 BMW X3 xDrive28i X3 xDrive28d X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i
StopTech
Part #: 34106787490CD
Price: $277.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - F10 M5 F12 M6 F06 M6 (pair) Direct replacement cross-drilled brake discs (396x24). These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look. These front brake discs / brake rotors fit:
2011+ F10 BMW M5
2013+ F06 BMW M6 Gran Coupe
2012+ F12 BMW M6
Not for cars with Carbon Ceramic rotors.
StopTech
Part #: 34212284103CD
Price: $779.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E46 M3 (pair) FRONT E46 M3 (US spec), not for ZCP/CSL package; Price is for the pair (includes one left, and one right cross drilled front brake disc)

Direct replacement FRONT cross-drilled brake discs for the E46 M3 These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible
Not for M3's with ZCP/CSL brakes.
StopTech
Part #: TMS1390
Price: $207.70 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - E28 535i/is - E24 635csi (pair) FRONT cross-drilled rotors/discs; priced by the pair;
The natural enemy of braking performance is heat. When temperature levels reach critical levels, a thin layer of gasses actually prevent the brake pads from making complete contact with the rotor friction surface. The addition of cross-drilling the friction surface promotes the evacuation of these gasses and improves stopping performance and pedal feel. TMS cross drilled rotors result in improved braking performance and look great too! All TMS cross drilled rotors are made to exacting standards by the worlds leading brake manufacturers. Each part is then analyzed for its specific application and design. Engineers then determine the optimal drilling pattern to maximize stopping power. These patterns are then cut into the rotor using today's most advanced CNC machines. This level of quality control ensures that each TMS High Performance rotor will perform to the highest levels every time under all driving conditions. All TMS cross-drilled rotors feature counter-sunkholes that reduce stress risers and fractures.

This item fits the following BMWs:
1985-1988 E28 BMW 535i 535is
1984-1989 E24 BMW 635csi
StopTech
Part #: 34111163147CD
Price: $147.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E32 ALL, E34 540i (pair) Direct replacement FRONT cross-drilled brake discs for the E34 540i, E32 735i/il 740i/il 750il. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1993-1995 E34 BMW 540i - not for 540i Sport
1988-1994 E32 BMW 735i 735il 740i 740il 750il
StopTech
Part #: 34111159896CD
Price: $193.80 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors - Front - E60 525i (pair) - see notes for applications Direct replacement FRONT cross-drilled brake discs for the E60 525i 2004-2005 with Manual transmission, 525i 2007 both manual and automatic transmissions.. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

These rear brake discs / brake rotors fit:
2004-2005 E60 BMW 525i manual transmission - not for Xi or AWD models
2007 E60 BMW 525i manual or automatic transmission
StopTech
Part #: 34116764021CD
Price: $203.80 (USD) 
Ships on Mar 9, 2018
Quantity:   
Cross-Drilled Brake Rotors - Rear - E9X 325Xi/328Xi, E91 328i, E93 328i (pair) Direct replacement REAR cross-drilled brake discs for the E9X 325i/325Xi, and E93 328i cabrio/convertible. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

These rear brake discs / brake rotors fit:
2006 E90 320si, 325Xi sedan
2007-later E90 328Xi, 328i xDrive sedan
2006 E91 325Xi wagon
2007-later E91 328i, 328Xi, 328i xDrive wagon
2007-later E92 328Xi coupe
2007-later E93 328i cabrio
StopTech
Part #: 34216764653CD
Price: $210.84 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E65 745i/li 750i/li 760li (pair) Direct replacement Front cross-drilled brake discs for the E46 M3 These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
StopTech
Part #: 34116750267CD
Price: $297.90 (USD) 
In Stock
Quantity:   
Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

Turner Motorsport
Part #: 34211161806KT
Price: $9.96 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stainless Brake Rotor Set Screw (34111123072) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

Turner Motorsport
Part #: 001359ecs01ax4KT
Price: $9.96 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cross-Drilled Brake Rotors - Front - E82, E9X (pair) Direct replacement Front cross-drilled brake discs for the E82 128i, E88 125i/128i, E9X 325i/325Xi, and 2007 E9X 328i/328Xi. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

These front brake discs / brake rotors fit:
2006 E90 325i & 325xi sedan
2006 E91 325i & 325xi touring wagon
2007 E90 328i, 328xi sedan
2007 E91 328i, 328xi touring wagon
2007 E92 328i, 328xi coupe
2008+ E82 128i coupe
2008+ E88 125i, 128i convertible
StopTech
Part #: 34116772669CD
Price: $207.80 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - E39 M5 (US Spec) (pair) Direct replacement Front cross-drilled brake discs for the E39 M5. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2000-2003 E39 BMW M5 - US spec
StopTech
Part #: TMS12142
Price: $271.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E36 318ti - 1995-1999 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1992-1998 E36 BMW 318ti
StopTech
Part #: 34211160809CD
Price: $157.90 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors - Front - E46 330i, Z4 3.0Si (pair) FRONT; price is for the pairFRONT; price is for the pair

This item fits the following BMWs:
2001-2005 E46 BMW 330i 330ci 330xi
2006 E46 BMW 330ci
2007-2008 E85 BMW Z4 3.0si
StopTech
Part #: 34101166071CD
Price: $217.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E90 330i & 330xi  (pair) Direct replacement Front cross-drilled brake discs for the E90 330i 330xi These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look. Direct replacement for BMW # 34116854999.

This item fits the following BMWs:
2006 E90 BMW 330i 330xi - Sedan
StopTech
Part #: 34116764645CD
Price: $239.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E36 M3 / M Coupe / Roadster (pair) Rear cross-drilled rotors/discs; priced for the pair

This item fits the following BMWs:
1995-1998 E36 BMW M3
1998-2002 Z3 BMW M Roadster M Coupe
StopTech
Part #: TMS3929
Price: $199.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E70 X5 3.0si, xDrive30i, E71 X6, F15 X5, F16 X6 Direct replacement Front cross-drilled brake discs for the E70 X5 3.0si. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

This item fits the following BMWs:
2007-2013 E70 BMW X5 3.0si X5 Drive30i X5 xDrive35i
2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35ii
2011-2014 E71 BMW X6 xDrive35i
2015+ F16 BMW X6 sDrive35i X6 xDrive35i
StopTech
Part #: 34116771985CD
Price: $255.90 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Rear - E28 528e, 535i/635i (pair) Rear cross-drilled rotors/discs; priced for the pair.
StopTech
Part #: 34211162968CD
Price: $137.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E34 525i/530i/535i/iT (pair) Direct replacement Front cross-drilled brake discs for the E34 525i 530i 535i These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i
StopTech
Part #: 34111160936CD
Price: $203.80 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - E39 540i (up to 3/00), E38 740i/il, E31 (pair) Direct replacement Front cross-drilled brake discs for the E39 540i, incl Touring (up to 3/00), E38 740 -12/00, 850 -8/93, 850CSi These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1997-3/2000 E39 BMW 540i sedan & wagon
1995-2001 E38 BMW 740i 740il
1990-1993 E31 BMW 850i 850ci 850csi
StopTech
Part #: 34111159895CD
Price: $223.80 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - E65 Alpina B7 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2002-2008 E65 BMW Alpina B7
StopTech
Part #: 34116753091CD
Price: $457.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E36 318ti thru 4/98, Z3 1.9 Direct replacement Front cross-drilled brake discs for the E36 318ti, Z3 1.9. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1994-4/1998 E36 BMW 318ti
1997-1998 Z3 BMW Z3 1.9
StopTech
Part #: 34116757750CD
Price: $157.90 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors - Front - MINI Cooper/Cooper S 02-06 (Pair) Cross drilled front rotor set for your new MINI Cooper and Cooper S are now available! Price is for 2 front rotors/discs.

This item fits the following BMWs:
2002-07/2006 R50 MINI MINI Cooper
2005-07/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-07/2006 R53 MINI MINI Cooper S
Packaged by Turner
Part #: 34111502891CD
Price: $159.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors- Rear - E65 Alpina B7 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2002-2008 E65 BMW Alpina B7
StopTech
Part #: 34216765891CD
Price: $377.90 (USD) 
Direct Ship
Quantity:   
Front Cross-Drilled & Floating Brake Rotors -E46 M3 US/Euro OEM supplier Zimmerman has filled the gap left by BMW when they decided to stop importing the Euro E46 M3 brake rotors to the US. The Euro rotors are cross-drilled and floating, providing much improved cooling over the stock US brakes and are a direct replacement for the stock US rotors. These Zimmerman floating rotors are made in Germany and are almost identical to the Genuine BMW floating rotors that are no longer available to the US. They share similar drill patterns, floating design, offset, and vaning as the OE BMW parts. Zimmerman has been an OE supplier to a large number of German cars, including Porsche and Mercedes.
These Zimmerman rotors are sold as a pair.

Applications:
2001-2006 BMW E46 M3
Zimmermann
Part #: 34112282801-ZIMM
Price: $523.70 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - E83 X3 2004-2010 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2004-2005 X3 2.5i & 3.0i (2.5 and 3.0 liter)
2006-2007 X3 3.0i (3.0 liter)
2008-2010 X3 3.0 Si (3.0 liter)
StopTech
Part #: 34113400151CD
Price: $219.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E70 X5 50i, E71 X6 50i, F15 X5 50i, F16 X6 50i (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2007-2013 E70 BMW X5 xDrive50i
2014+ F15 BMW X5 xDrive50i
2008-2014 E71 BMW X6 xDrive50i
2015+ F16 BMW X6 xDrive50i
StopTech
Part #: 34116771982CD
Price: $359.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E70 X5 4.8i 35d, E71 X6 35 (pair) Direct replacement Front cross-drilled brake discs for the E70 X5 4.8i 35d, E71 X6 xDrive35i. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

This item fits the following BMWs:
2007-2013 E70 BMW X5 4.8i X5 xDrive35d X5 xDrive48i
2008-2010 E71 BMW X6 xDrive35i
StopTech
Part #: 34116771986CD
Price: $279.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E32 740i/750i (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1988-1994 E32 BMW 740i 740il 750il
StopTech
Part #: 34211155501CD
Price: $155.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E30 M3 (pair) Direct replacement Front cross-drilled brake discs for the E30 M3. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1988-1991 E30 BMW M3
StopTech
Part #: 34112226813CD
Price: $213.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E90 E92 325i 328i (pair) Direct replacement REAR cross-drilled brake discs for the E90 323i/325i, 2007-up E90/E92 328i. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

These rear brake discs / brake rotors fit:
2006 E90 323i, 325i sedan
2007-up E90, E92 328i sedan, coupe
StopTech
Part #: 34216764651CD
Price: $187.80 (USD) 
Direct Ship
Quantity:   
Brake Rotor Retaining Screw / Hold Down Bolts (pair) - M8x14 Brake rotor retaining screws used for many BMW applications. M8x14. We recommend replacing the brake rotor hold down bolts each time the brake rotors are removed as they have a tendency to rust into place or to become stripped with multiple uses. This is for a pair of 2 bolts.

+ Applications
(click here to check your car)
Fits the following BMWs:
Front Brake Rotor Hold Down Bolt
E31 840Ci840i850Ci850CSi
E32 735i735iL740i740iL750iL
E34 525i530i535i540iM5 3.6
E36 318i318is318ti320i323i325i325is328iM3M3 3.2
E38 740i740iL740iLP750iL750iLP
E39 525i528i530i540i540iP
E46 320i323Ci323i325Ci325i325xi328Ci328i330Ci330i330xM3i
E52 ALPINA V8Z8
E53 X5 3.0iX5 4.4iX5 4.6isX5 4.8is
E60 525i525xi530i530xi545i550i528i528xi535i535xi550iE61 530xi535xi
E63 645Ci650i
E65 745i750i760iALPINA B7745Li750Li760Li
E70 X5 3.0siX5 3.5dX5 4.8iX5 MX5 35dXX5 35iXX5 50iX
E71 X6 35iXX6 50iXX6 M
E82 128iE82 135i
E83 X3 2.5iX3 3.0iX3 3.0iX3 3.0si
E84 X1 28iX1 28iXX1 35iX
E85 Z4 2.5iZ4 3.0iZ4 3.0si
E89 Z4 28iZ4 30iZ4 35iZ4 35is
E90 323i325i325xi328i328xi330i330xi335i335xi323i328i328xi335d335i335xi
E91 325xiE91 328i328xi
E92 328i328xi335i335xi328i328xi335i335is335xi
E93 328i335i328i335i335is
F01 740i750i750iXALPINA B7ALPINA B7X 740Li 750Li 750LiX 760Li ALPINA B7L ALPINA B7LX740LdX740LiX
F06 640i640iX650i650iXALPINA B6X
F07 535i535iX550i550iX535i535iX550i550iX
F10 528i528iX535i535iX550i550iX535d535dX528I
F12 640i640iX650i650iX
F15 X5 35dXX5 35iX5 35iXX5 50iX
F16 X6 35iX6 35iXX6 50iX
F22 228i228iXM235iM235iX
F25 X3 28dXX3 28iX3 28iXX3 35iX
F26 X4 28iXX4 35iX
F30 320i320iX328d328dX328i328iX335i335iX
F32 428i428iX435i435iX
F34 328i328iX335iX
F36 428i428iX435i435iX
F55 CooperCooper SF56 CooperCooper S
I01 i3i3 Rex
I12 i8
R60 Coop.SX JCWCooperCooper SCooper SX
R61 Coop.SX JCWCooperCooper SCooper SX
Z3 Z3 1.9Z3 2.5Z32.5iZ3 2.8Z3 3.0iZ3 M3.2

Rear Brake Rotor Hold Down Bolt
E31 840Ci840i850Ci850CSi
E36 318i318is320i323i325i325is328iM3M3 3.2
E38 740i740iL740iLP750iL750iLP
E39 525i528i530i540i540iPM5
E46 320i323Ci323i325Ci325i325xi328Ci328i330Ci330i330xiM3
E52 ALPINA V8Z8
E53 X5 3.0iX5 4.4iX5 4.6isX5 4.8is
E60 525i525xi530i530xi545i550iM5528i528xi535i535xi550i
E63 645Ci650iM6650i
E65 745i750i760iALPINA B7745Li750Li760Li
E70 X5 3.0siX5 3.5dX5 4.8iX5 MX5 35dXX5 35iXX5 50iX
E71 X6 35iXX6 50iXX6 M
E82 128i135iM Coupé
E83 X3 2.5iX3 3.0iX3 3.0iX3 3.0si
e84 X1 28iX1 28iXX1 35iX
E85 Z4 2.5iZ4 3.0iZ4 3.0siZ4 M3.2
E89 Z4 28iZ4 30iZ4 35iZ4 35is
E90 323i325i325xi328i328xi330i330xi335i335xiM3
E91 325xi328i328xi328i328xi
E92 328i328xi335i335xiM3328i328xi335i335is335xiM3
E93 328i335iM3
F01 740i750i750iXALPINA B7ALPINA B7X740Li750Li750LiX760LiALPINA B7LALPINA B7LX740LdX740Li740LiX
F06 640i640iX650i650iXALPINA B6XM6
F07 535i535iX550i550iX
F10 528i528iX535i535iX550i550iXM5528i535d535dX
F12 640i640iX650i650iXM6
F15 X5 35dXX5 35iX5 35iXX5 50iX
F16 X6 35iX6 35iXX6 50iX
F22 228i228iXM235iM235iX
F25 X3 28dXX3 28iX3 28iXX3 35iX
F26 X4 28iXX4 35iX
F30 320i320iX328d328dX328i328iX335i335iX
F32 428i428iX435i435iX
F34 328i328iX335iX
F36 428i428iX435i435iX
F55 CooperCooper S
F56 CooperCooper S
F80 M3
F82 M4
F83 M4
I01 i3i3 Rex
I12 i8
R60 Coop.SX JCWCooperCooper SCooper SX
R61 Coop.SX JCWCooperCooper SCooper SX
Z3 Z3 1.9Z3 2.5Z3 2.5iZ3 2.8Z3 3.0iZ3 M3.2
Genuine BMW
Part #: 34211161806-2
Price: $2.60 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cross-Drilled Brake Rotors - Rear - MINI Cooper and Cooper S (Pair) Cross drilled rear rotor set for your new MINI Cooper and Cooper S are now available! Price is for 2 rear rotors/discs.

This item fits the following MINIs:
2002-2006 R50 MINI MINI Cooper
2005-2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-2006 R53 MINI MINI Cooper S
Turner Motorsport
Part #: 34211503070CD
Price: $141.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E36 M3, MZ3 (Pair) Direct replacement Front cross-drilled brake discs for the E36 M3, MZ3 These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1995-1998 E36 BMW M3
1998-2002 Z3 BMW M Roadster M Coupe
StopTech
Part #: TMS3928
Price: $197.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E52 Z8 2000-2003 (pair) Direct replacement cross-drilled brake discs for BMW Z8. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2000-2003 E52 BMW Z8 Roadster
StopTech
Part #: 34111165072CD
Price: $279.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - (312x24)(Pair) - Front - F30 320i, 328i, F22 228i, F32 428i Direct replacement FRONT cross-drilled brake discs for the F30 328i, 328xi, and Ef32 428i 428xi. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look. Direct replacement for BMW # 34116792219.

This item fits the following BMWs:
2014+ F22 BMW 228i 228i xDrive
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 428i 428i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe
Application note: these rotors fit cars not equipped with the factory M Sport package or M Sport brakes upgrade
StopTech
Part #: 34116792219CD
Price: $243.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - (340x30)(pair) - Front - F22 M235i M235iX, F30 335i 335iX, F32 435i 435iX Direct replacement FRONT cross-drilled brake discs for the F30 335i, 335xi, and F32 435i 435xi. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look. Direct replacement for BMW # 34116792223.

F30 Brake FAQ Articles
F30 328i Brake Package Differences
F30 335i Brake Package Differences
Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs with their stock braking systems:
2014+ F22 BMW M235i M235iX
2012+ F30 BMW 335i 335xi - Sedan
2014+ F32 BMW 435i 435iX - Coupe
2014+ F33 BMW 435i 435iX - Convertible
2014+ F34 BMW 335iX - Gran Turismo
2014+ F36 BMW 435i 435iX - Gran Coupe

This item fits the following BMWs with the S2NHA M Sport brake option:
2014+ F22 BMW 228i 228iX
2012+ F30 BMW 328i 328xi - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F32 BMW 428i 428iX - Coupe
2014+ F33 BMW 428i 428iX - Convertible
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F36 BMW 428i 428iX - Gran Coupe
StopTech
Part #: 34116792223CD
Price: $293.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Rear - E83 X3 2004-2010 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

These rear brake rotors fit the following:
2004-2005 X3 2.5i & 3.0i (2.5 and 3.0 liter)
2006-2007 X3 3.0i (3.0 liter)
2008-2010 X3 3.0 Si (3.0 liter)
StopTech
Part #: 34213332217CD
Price: $209.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - E39 525i/528i (pair) Direct replacement Front cross-drilled brake discs for the E39 525i 528i These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i
StopTech
Part #: 34111164839CD
Price: $191.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - Z3 (pair) Z3 Rear Cross Drilled rotors/discs (pair)

This item fits the following BMWs:
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
StopTech
Part #: 34211164399CD
Price: $161.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - F10 F12 F06 F01 F07 (pair) Direct replacement cross-drilled brake discs (348x36mm). These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2010+ F07 BMW 535i GT, 535i xDrive GT
2011+ F10 BMW 550i 550i xDrive
2012+ F12 BMW 650i 650i xDrive
2013+ F06 BMW 650i Gran Coupe 650i xDrive Gran Coupe
2010+ F01 BMW 740i 740li 740li xDrive 740ld xDrive


Only for cars with High Speed Braking System - Option Code S5AEA

2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive
StopTech
Part #: 34116785670CD
Price: $441.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E85 Z4 3.0i, Z4 3.0si (pair) Direct replacement REAR cross-drilled brake discs for the E85 Z4 3.0i & Z4 3.0si. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

This item fits the following BMWs:
2003-2008 E85 BMW Z4 3.0i Z4 3.0si
StopTech
Part #: 34216766219CD
Price: $193.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E12, E23, E24 (pair) FRONT cross-drilled rotors/discs; priced by the pair;
The natural enemy of braking performance is heat. When temperature levels reach critical levels, a thin layer of gasses actually prevent the brake pads from making complete contact with the rotor friction surface. The addition of cross-drilling the friction surface promotes the evacuation of these gasses and improves stopping performance and pedal feel. TMS cross drilled rotors result in improved braking performance and look great too! All TMS cross drilled rotors are made to exacting standards by the worlds leading brake manufacturers. Each part is then analyzed for its specific application and design. Engineers then determine the optimal drilling pattern to maximize stopping power. These patterns are then cut into the rotor using today's most advanced CNC machines. This level of quality control ensures that each TMS High Performance rotor will perform to the highest levels every time under all driving conditions. All TMS cross-drilled rotors feature counter-sunkholes that reduce stress risers and fractures.

This item fits the following BMWs:
1979-1981 E12 BMW 528i
1976-1981 E12 BMW 530i
1976-1982 E24 BMW 630csi 633csi 635csi
1977-1982 E23 BMW 733i
StopTech
Part #: 34111163130CD
Price: $89.90 (USD) 
$139.90 (Sale - Save 36%)
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E38 740i/il, E31 840i/ci, 850i/ci/csi Direct replacement REAR cross-drilled brake discs for the E38 740I/IL, E31 840i/ci, 850i/Ci/Csi. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
StopTech
Part #: 34216757748CD
Price: $187.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E82 128i (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2008+ E82 BMW 128i
StopTech
Part #: 34216855005CD
Price: $245.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E65 745i/li 760i/li 2002-3/2005 (pair) Direct replacement REAR cross-drilled brake discs for the E65 745I/760I These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look. 2002-3/2005 E65 BMW 745i 745li 760i 760li
StopTech
Part #: 34211166129CD
Price: $237.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E70 X5 3.0si, 35d. 35i, E71 X6 35, (pair) Direct replacement REAR cross-drilled brake discs for the E70 X5 3.0si. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

This item fits the following BMWs:
2007-2013 E70 BMW X5 3.0si X5 xDrive30i X5 xDrive35d X5 xDrive35i
2008+ E71 BMW X6 xDrive35i
StopTech
Part #: 34216771970CD
Price: $213.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E34 525i/530i/535i/iT (pair) Rear cross-drilled rotors/discs; price is for the pair
StopTech
Part #: 34211162305CD
Price: $135.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E39 M5 & E46 M3 (pair) REAR E46 M3. Price is for the pair (includes one left, and one right cross drilled rear brake disc.)

This item fits the following BMWs:
2001-2006 E46 BMW M3
1999-2003 E39 BMW M5
StopTech
Part #: 34212229379CD
Price: $219.18 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Rear - E85 Z4 2.5i (pair) Direct replacement REAR cross-drilled brake discs for the e85 z4 2.5i. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

This item fits the following BMWs:
2003-2005 E85 BMW Z4 2.5i
StopTech
Part #: 34216794306CD
Price: $159.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled & Floating Brake Rotors - Front - E46 M3 CSL/ZCP Replacement front brake rotor (345x28) for the M3 Competition Package or factory CSL and Z4 M. These are a DIRECT replacement for the ZCP Upgrade or CSL brakes on the E46 M3 and the original brakes on the Z4 M. Note - they are not a 'bolt-on' upgrade for the stock US M3 rotors (see the E46 M3 CSL/ZCP Brake Upgrade for an upgrade package. Price includes Left and Right rotors with new retaining screws.

This item fits the following BMWs:
2001-2006 E46 BMW M3 - only with ZCP/CSL package brakes
2006-2008 E85 E86 BMW Z4 M Roadster M Coupe
Genuine BMW
Part #: TMS1518
Price: $479.48 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Genuine BMW
Part #: 34116775277CDKT
Price: $423.00 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E65 750i/li, 760i/li 03/2005-2008i (pair) Direct replacement REAR cross-drilled brake discs for the E65 E66 750i/li 760i/li. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

This item fits the following BMWs:
3/2005-2008 E65 BMW 750i 750li 760i 760li
StopTech
Part #: 34216765889CD
Price: $295.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E90 330i/Xi, E9X 335i/Xi (pair) Direct replacement REAR cross-drilled brake discs for the E90 330i/330Xi and E90/E92/E93 335i/Xi. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

These rear brake discs / brake rotors fit:
2006 E90 330i, 330Xi sedan
2007-up E90, E92, E93 335i/335Xi sedan, coupe, and convertible
StopTech
Part #: 34216764655CD
Price: $232.44 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors - Front - E36 (except M3), E46 323i/Ci, Z3 (except M) (pair) FRONT cross-drilled rotors/discs; priced by the pair; for E46 these fit the 323i Sedan and Coupe only (Convertible and Touring use different rotors)

Direct replacement FRONT cross-drilled brake discs for the E36 (except M3), M46 323i/ci, Z3 These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
4/1998-1998 E36 BMW 318ti
1999-2000 E46 BMW 323i 323ci - not for Convertible or Wagon!
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8
StopTech
Part #: 34111162282CD
Price: $173.80 (USD) 
Direct Ship
Quantity:   
Brake Rotor Retaining Screw / Hold Down Bolts (pair) - M8x12 Brake rotor retaining screw used for many BMW applications. M8x12.We recommend replacing the brake rotor hold down bolts each time the brake rotors are removed as they have a tendency to rust into place or to become stripped with multiple uses. This is for a pair of 2 bolts.

+ Emblem Application Specifics
(click here to check your car)
Fits the following BMWs:
Front Brake Rotor Hold Down Bolt
E12 528i
E12 530i
E21 320i
E23 733i
E23 735i
E24 630CSi
E24 633CSi
E28 524td
E28 528e
E28 533i
E28 535i
E28 M5
E30 325ix
E30 318i
E30 318is
E30 325e
E30 325i
E30 M3
E31 850Ci
E32 735i
E32 735iL
E32 750iL
E34 525i
E34 535i
E34 M5 3.6
E39 M5
E46 M3
E60 M5
E63 M6
E64 M6
E82 M Coupé
E85 Z4 M3.2
E86 Z4 M3.2
E90 M3
E90N M3
E92 M3
E92N M3
E93 M3
E93N M3
F06 M6
F10 M5
F12 M6
F13 M6
F80 M3
F82 M4
F83 M4

Rear Brake Rotor Hold Down Bolt
E30 318i
E12 528i
E12 530i
E21 320i
E23 733i
E23 735i
E24 630CSi
E24 633CSi
E24 635CSi
E24 M6
E28 524td
E28 528e
E28 533i
E28 535i
E28 M5
E30 318i
E30 318is
E30 325e
E30 325i
E30 M3
E31 850Ci
E32 735i
E32 735iL
E32 740i
E32 740iL
E32 750iL
E34 530i
E34 540i
E34 525i
E34 535i
E34 M5 3.6
Genuine BMW
Part #: 34111123072-2
Price: $2.10 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cross-Drilled Brake Rotors - Rear - E34 540, M5 (Pair) Rear cross-drilled rotors/discs; priced for the pair
StopTech
Part #: 34211159659CD
Price: $155.80 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors - Rear - E70 X5 4.8i - X6 35i, 5.0i (pair) Direct replacement REAR cross-drilled brake discs for the E70 X5 4.8i, E70 X6 35i X6 50i. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

This item fits the following BMWs:
2007-2013 E70 BMW X5 4.8i X5 xDrive48i X5 xDrive50i
2007-2008 E71 BMW X6 xDrive35i
2008-2013 E71 BMW X6 xDrive50i
StopTech
Part #: 34216771971CD
Price: $281.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E46 325xi Direct replacement REAR cross-drilled brake discs for the E46 325XI These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2001-2005 E46 BMW 325xi
StopTech
Part #: 34211166165CD
Price: $201.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - MINI Cooper Paceman S, Cooper Countryman S R60 R61 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following MINIs:
2011+ R60 MINI MINI Cooper Countryman S, MINI Cooper Countryman SX

2011+ R61 MINI MINI Cooper Paceman S, MINI Cooper Paceman SX

StopTech
Part #: 34119804829CD
Price: $217.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E53 X5 3.0i 4.4i 8/00-06 Direct replacement Front cross-drilled brake discs for the E53 X5 3.0 4.4i These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
8/2000-2006 E53 BMW X5 3.0i X5 4.4i
StopTech
Part #: 34116765457CD
Price: $237.90 (USD) 
Direct Ship
Quantity:   
Zimmermann
Part #: tms2175KT
Price: $158.74 (USD) 
Ships in 2 Days
Quantity:   
Cross-Drilled Brake Rotors - Rear - E60 xi - 2004-2010 525xi, 528xi, 530xi, 535xi (pair) Direct replacement REAR cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

These REAR brake rotors/discs fit:
2004-2006 E60 525xi and 530xi sedan (AWD)
2004-2006 E61 530xi Touring wagon (AWD)
2007-2008 E60 528xi and 535xi sedan (AWD)
2007-2008 E61 535xi wagon (AWD)
2009-2010 E60 528i xDrive & 535i xDrive sedan (AWD)
2009-2010 E61 535i xDrive wagon (AWD)
StopTech
Part #: 34216763345CD
Price: $211.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Rear - E53 X5 3.0i 00-06, X5 4.4i 00-03 Direct replacement REAR cross-drilled brake discs for the E53 X5 3.0, 4.4i These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2000-2006 E53 BMW X5 3.0i
2000-2003 E53 BMW X5 4.4i
StopTech
Part #: 34216765458CD
Price: $193.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E39 530i, 540i 03/00+ (pair) Direct replacement Front cross-drilled brake discs for the E39 530i 01-03 and 540i 03/00-03. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels. A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2001-2003 E39 BMW 530i
03/2000-2003 E39 BMW 540i Sedan and Wagon
StopTech
Part #: 34116767059CD
Price: $261.80 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E60 M5, E63 M6 Front Centric Cross-Drilled Floating Rotors (Pair)

M5/M6 stock replacement front brake rotors. Manufactured by Centric/Stoptech. 

These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels. Centric is a premium brand that also manufactures StopTech Big Brake kits. 

This item fits the following BMWs: 
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6

Centric
Part #: 34112282805cenKT
Price: $999.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E46 323i/Ci - (pair) REAR - E46 323i/Ci Sedan/Coupe (not Convertible or Touring); also fits rear E36 328i Convertible

This item fits the following BMWs:
1996-1998 E36 BMW 323ic 328ic - Convertible Only
1999-2000 E46 BMW 323i 323ci - Sedan - Coupe - Not for Convertible or Wagon
StopTech
Part #: 34211165211CD
Price: $169.80 (USD) 
Direct Ship
Quantity:   
Front Brake Rotor Retaining Screw / Hold Down Bolts (Set of 4) - M8x12 Brake rotor retaining screw used for many BMW applications. M8x12.We recommend replacing the brake rotor hold down bolts each time the brake rotors are removed as they have a tendency to rust into place or to become stripped with multiple uses. This is for a set of 4 bolts.

Genuine BMW
Part #: 34111123072-4
Price: $3.80 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cross-Drilled Brake Rotors - Front - E60 5 Series 6 Cyl 525/528/530/535 (Many, See List) (pair) Direct replacement Front cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

These front brake discs / rotors fit:
2004-2005 E60 525i **AUTO ONLY**
2006-2006 E60 525i & 525xi (auto & manual trans)
2004-2006 E60 530i, 530xi, 530xi wagon (All)
2007-2009 E60 528i, 528xi, 528i xDrive (All)
2008-2010 E60 535xi, 535i xDrive (All)
StopTech
Part #: 34116753221CD
Price: $245.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Rear - E53 X5 4.4i/4.6is/4.8is (Vented) (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
E53 X5 4.4i, 2004-2006 (N62 engine)
E53 X5 4.6is, 2001-2003
E53 X5 4.8is, 2004-2006
StopTech
Part #: 34216756849CD
Price: $213.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E28 528e, 533i, 524td (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

Sold as a FRONT pair.

This item fits the following BMWs:
1982-1988 E28 BMW 528e 533i
StopTech
Part #: 34111151655CD
Price: $141.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E60 535/545I/550i & E63/E64 645i/650i (Pair) Direct replacement REAR cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

These rear brake discs / rotors fit:
2004-2010 E60 5 Series 535i 545i 550i sedan
2004-2010 E63 6 Series 645Ci, 650i Coupe & Convertible
StopTech
Part #: 34216763827CD
Price: $227.90 (USD) 
In Stock
Quantity:   
Cross-Drilled Brake Rotors (330x20) - Rear - F30 335i 335iX, F32 435i 435iX (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

Replacement rear brake rotors (330x20) for the 2012+ F30 335i/335xi and F32 435i/435xi. These rotors fit the standard 335/435 brake package (not the optional M Sport upgrade or M Performance brakes).

F30 Brake FAQ Articles
F30 335i Brake Package Differences
Brake Rotor Buying Guide

Price is for a pair of rotors.

This item fits the following BMWs:
2012+ F30 BMW 335i 335iX - Sedan
2014+ F32 BMW 435i 435iX - Coupe
2014+ F33 BMW 435i 435iX - Convertible
2014+ F34 BMW 335iX - Gran Turismo
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
StopTech
Part #: 34216792233CD
Price: $285.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Front - E36 M3, MZ3 (Pair) Cross-drilling a rotor is a way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder.

These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

This item fits the following BMWs:
1995-1998  E36 BMW  M3
1998-2002  Z3 BMW  M Roadster M Coupe
StopTech
Part #: 128.34038KT
Price: $207.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E60 525i 528i 530i (pair) Direct replacement REAR cross-drilled brake discs for the E60 525i 528i 530i. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape giving better braking performance.

These rear brake discs / brake rotors fit:
2004-2010 E60 525i 528i 530i - not xi models
StopTech
Part #: 34216753215CD
Price: $212.64 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E30 M3 (pair) Price is for the pair of rotors/discs.
StopTech
Part #: 34212225507CD
Price: $147.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - MINI Cooper Countryman R60 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following MINIs:
2011+ R60 MINI MINI Cooper Countryman, MINI Cooper Countryman S, MINI Cooper Countryman S ALL4
2011+ R61 MINI MINI Cooper Paceman, MINI Cooper Paceman S
StopTech
Part #: 34209804830CD
Price: $161.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Front - E46 M3 CSL/ZCP MZ4 (pair) FRONT E46 M3 (US spec), only for ZCP/CSL package & all MZ4. Price is for the pair (includes one left, and one right cross drilled front brake disc)

Direct replacement FRONT cross-drilled brake discs for the E46 M3 CSL/ZCP. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible
2006-2008 E85 BMW Z4 M Roadster M Coupe
StopTech
Part #: TMS12134
Price: $549.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Cross-Drilled Brake Rotors - Rear - E36 318i/323i/325i/328i(not 328i convertible) (pair) Direct replacement REAR cross-drilled brake discs for the E36. Cross-drilled rotors help to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look. Price is for the pair of rotors/discs.
These rotors feature a silver hat.


This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is
Not for 328i Convertible!
StopTech
Part #: 34211164401CD
Price: $173.80 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - F25 X3 28dx, 28ix, 35ix, F26 X4 (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2011+ F25 BMW X3 xDrive28i X3 xDrive28d X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i
StopTech
Part #: 34206790362CD
Price: $235.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled Brake Rotors - Rear - E89 Z4 sDrive35is (pair) Direct replacement cross-drilled brake discs. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

A cross-drilled rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The holes in our rotors allow the gases to escape, giving better braking performance and a sportier look.

This item fits the following BMWs:
2009+ Z4 BMW Z4 sDrive35is
StopTech
Part #: 34216782607CD
Price: $265.90 (USD) 
Direct Ship
Quantity:   
Cross-Drilled & Floating Brake Rotors - Rear - E46 M3 US/Euro/CSL/ZCP Original BMW 2-piece floating and cross-drilled rotor from the Euro M3, M3 ZCP, M3 CSL, and Z4 M. These rotors are a DIRECT replacement for your stock US-spec rotors too. This price is for a pair of left and right rotors with new retaining screws. These are a 2-piece construction for lighter weight and improved cooling. A great ‘first step’ upgrade to getting better braking on the street or track.

This item fits the following BMWs:
2001-2006 E46 BMW M3 US-spec (upgrade!)
2004-2006 E46 BMW M3 CSL, M3 ZCP
2006-2008 E85 E86 BMW Z4 M Roadster M Coupe
Genuine BMW
Part #: 34212282303K
Price: $336.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook



    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2018. All Rights Reserved.