Turner Motorsport for BMW E46 M3 S54 (1999-2005)

Sometimes choosing the correct shift kit proves difficult when you dual-purpose your favorite vehicle, we understand this well. The early days for any race enthusiast usually begins with a car that is needed to daily drive and setup to get out on the track. What becomes difficult is properly modifying that car to feel comfortable in both situations which is why we took this view on our new short shift line. This upgraded lever is a quick swap option to replace the standard shift lever that come with our kits so you can keep your hands closer to the wheel while shifting at high speeds. Designed from anodized aluminum this lever looks great in any interior for the daily driver who simply prefers the taller lever look and feel.

NOTE THAT THESE ARE DESIGNED TO WORK WITH TURNER MOTORSPORT SHORT SHIFTERS ONLY - We wanted to give you the option to buy one separately, in case you changed your mind after buying our short shifter.

Features:

Compatible with stock shift boot fits nicely into the machined groove at the bottom of the lever to maintain a clean look in the interior.
Machined from 6061-T6 aluminum and type II anodized for exceptional durability and corrosion resistance.
Available in either black or clear anodize to match your vehicle’s interior.
Rally shift knob is machined from black delrin.
Unlike aluminum, delrin will not hold heat so on those hot days you won’t have to worry about burning your hand on a knob that’s been baking in the sun.
Shift knob is threaded onto the end of the shift lever utilizing a standard ⅜-16 thread to allow for easy removal and attachment of your favorite beer tap or other accessory.
“Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.
22mm adjustment range to fine tune shifter throw and feel.

The E46 M3 CSL sparked a lot of interest among enthusiasts about the "high kick" look. But what about those who want the aggressive, high kick look without having to replace the entire trunk? We found ourselves scratching our heads, especially unsatisfied with the add-on CSL spoilers you can find on the market.

We took it upon ourselves to CAD design an aggressive, high kick spoiler that pays homage to the CSL trunk, while flowing perfectly with the simple, yet aggressive body lines of the E46 coupe. The carbon fiber is hand laid, with a beautiful gloss finish that will match well with any other carbon fiber accents on your E46 coupe. Our high kick rear spoiler will instantly give your vehicle a more aggressive look.

Rear Axle Carrier Panel (RACP) failure is a well-documented issue that plagues all BMW E46 models. Due to thin sheet metal mounting, the forces applied during cornering, acceleration, and braking create stress fractures in the carrier panel, resulting in large cracks or breaks that risk the structural integrity of your chassis. To fix this issue, many enthusiasts opt to install weld-in reinforcement plates on the underside of the RACP. While this remedies the formation of additional stress cracks and adds rigidity to failure-prone areas, it does not prevent the entire carrier panel from flexing during high-performance driving.

Our all-new Rear Subframe Reinforcement Brace is engineered to add structure to the E46's rear chassis under high-stress conditions, eliminating the common weak points in the RACP while providing the confidence you need for performance driving. Don't let chassis flex limit your car’s potential—upgrade your E46 with the Turner Motorsport Rear Subframe Reinforcement Brace today!

How It Works:

During performance driving, the Rear Axle Carrier Panel (RACP) must react the forces of longitudinal and lateral accelerations. During forward acceleration, the differential transmits torque through the subframe to the RACP, forcing the rearmost subframe mounting points downward. This downward movement flexes the carrier panel, reducing its ability to handle torque efficiently. By linking the rearmost subframe mounting points to the rear shock towers, downward flex is restricted, resulting in improved torque transfer and stability. Alternatively, high-grip cornering generates lateral acceleration (side-to-side) forces across the RACP. Similar to how a rear strut brace functions, connecting the rear shock towers helps to counteract these forces. Adding the subframe to this connection further reduces lateral loads, eliminating side-to-side flex and enhancing overall stability.

Features & Design:

Four-Point Triangulated Structure: Links the rearmost subframe mounting locations to both rear strut towers for superior load distribution. Enhanced Stability: Reduces lateral and longitudinal RACP flex during acceleration, braking, and cornering. Improved Torque Transfer: Minimizes downward flex of the RACP, ensuring efficient power delivery for enhanced driveability. High-Performance Durability: Heavy-duty steel tube construction ensures lasting support during spirited driving, track use, and for vehicles with increased power output. Blue Powdercoat Finish: Offers fantastic corrosion resistance, protection from scuffs and scratches, and a stylish appearance that is sure to complement your performance-centric E46. Underside Reinforcement Compatibility: Designed to work seamlessly alongside our underside RACP reinforcement plates (TDR4675412, T#91). Kit Includes:

Rear Subframe Brace Sedan Subframe Brace Spacers Extended-Length Drill Bit (1/4", 12" Overall Length) High-Speed Drill Bit (12.5mm, 152mm Overall Length) Drill Bit Guide Extended Subframe Bolts Zinc-Plated Steel Hex Nut (2) Installation & Support:

Need installation tips? Our team has assembled a guided start-to-finish installation tutorial, including detailed instructions on drilling and cutting your trunk floor panel for perfect fitment. Click HERE for Installation Instructions

BMW S54 Silicone Throttle Body Boot Set - With Clamps is an essential upgrade for any BMW S54 engine, designed to replace aging and deteriorating rubber intake boots. Engineered by Turner Motorsport, these silicone throttle body boots provide superior durability and reliability under both street and race conditions, including boosted applications. Unlike simple silicone reducers, these boots are meticulously designed with the same internal features as the originals, ensuring a perfect factory fitment. The three-ply construction offers enhanced strength and longevity, making them slightly thicker than the factory boots. This set includes six boots and compatible clamps, providing a complete solution at a fraction of the cost of OEM replacements.

• Enhanced Durability: Three-ply construction withstands heat cycling, vibrations, and oil exposure.
• Perfect Fit: Designed with factory fitment in mind, including all internal features of the originals.
• Complete Set: Includes six boots and compatible clamps for a full replacement.
• Cost-Effective: Less than half the price of OEM replacement boots.
• Versatile Compatibility: Fits all intake plenums, including US, CSL, and replicas using OE-style boots.

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Flexible silicone smooths the intake tract while allowing for a range of performance intakes fitments. The ultimate in durability!

In most vehicle applications, the rubber intake elbow found in the intake system is not designed for performance or modification. They were designed to get the job done but when you add a performance filter, intake or tune, the stock elbow will start to show it weakness. The stock rubber elbows disrupt air flow as it passes over the accordion sections causing unwanted turbulence and negating the effects of intake modifications.

With high quality 4 ply construction, the Turner intake boot is strong but flexible, ensuring a secure fit on an OEM or aftermarket intake system. A smooth interior ensures unimpeded airflow, while a smooth, unassuming exterior adds to any engine bay.

Benefits:

Improved throttle response,
Increase induction sound
Increased power output - and power output, Best when paired with an ECS drop-in air filter.(ES4461001 or ES4460965)

Our unique and carefully designed front lip for the E46 M3 focuses on enhancing the car's aesthetics while preserving its natural beauty. This front lip is constructed of high-gloss, 3mm thick, 2x2 carbon fiber that adds a tasteful accent to the bumper while being strong and lightweight!

This aesthetic piece was crafted to stand out from other options available on the market by incorporating design elements that draw inspiration from the stock bumper but reimagines them in a way that sets it apart. Rather than overcomplicating the car's body styling, the goal was to seamlessly integrate the front lip with the existing design. This approach aims to enhance the car's body styling rather than overshadow it.

This versatile design is suited for both track use and everyday driving on the streets. Our E46 M3 front lip was designed to strike a balance between uniqueness and performance oriented aesthetics, while complementing the car's existing design. This is a clear cut choice front lip for someone looking to enhance the look of their M3.

Once you see your M3 with this front lip from, you will no longer think the front end is complete without it. Rounding out the near perfect car, this front lip completes the front end by filling out the open space underneath and sets the stage to enjoy the timeless body styling incorporating a curvature that compliments the front bumper.

Features & Benefits:

High-Gloss
Beautiful flowing carbon weave
Strong and lightweight
Updates the bumper with carbon appearance that enhances the existing body lines
Motorsport styling
Enhanced lowered appearance
Design:

CAD designed in-house for precision fitment
3mm 2x2 carbon fiber shell securely mounted at strong mounting points along the whole surface where the lip mates to the bumper
Front leading edge helps compliment and accentuate the forgotten body lines to add an aggressive yet subtle flare to the front end
Attaches to the front bumper with self tapping screws, plastic riv-nut and 6mm 3m adhesive tape to securely mount
Installation hardware included

If allowed in the rules these solid aluminum transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. These are machined from solid aluminum and have zero deflection, engine torque will cause a rubber or urethane mount to flex or deflect allowing more torque to passed through the drive line (instead of being wasted winding up the mount). This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of transmission mounts you will ever need. We very strongly recommend using the solid transmission and engine mounts together as a complete kit, mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used.

These are a no-compromise design for all-out racing use, full solid aluminum mounts should not be used on street-driven cars since there is no material to absorb vibration making these quite harsh for regular street use (track cars don't care about noise).

Product features and benefits:

• Crisper throttle response, positive shifter location, direct power transfer
• Precision machined billet 6061-T6 aluminum housing
• Grade 10.9 stud - fear not, big turbo owners
• Engineered in-house and made in America

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe ​

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Upgrade your BMW's performance with Turner Power Pulleys, designed to enhance engine efficiency and increase available horsepower. These pulleys reduce the rotation of essential accessories by up to 10-20%, redirecting engine power to the wheels. Turner ensures these pulleys maintain proper functionality through rigorous on and off-track testing.

Crafted from durable T-6061 aluminum and finished in black hard anodizing, Turner Power Pulleys offer longevity, heat resistance, and chemical durability. They retain the stock-like appearance while providing increased strength and reduced weight, eliminating concerns about plastic failure.

• GERMAN-MADE
• DIRECT REPLACEMENT
• LIFETIME WARRANTY!
• BUY A PAIR FOR THE PRICE OF FACTORY SINGLE!

The rear springs on the 2001-2006 E46 M3 models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time.

The factory BMW springs sell for $140+ each. We sold and replaced enough while working in New England that we were able to get a strong grasp of the issue and come up with our own springs that are an improvement over the factory springs in every way. These springs are made in Germany using high grade spring steel that is then shot-peened for longer life and powder-coated for protection. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Replaces Coupe models only.

This item fits the following BMWs:
2001-2006 E46 BMW M3 Coupe

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

• Enhanced Appearance: Mirror finish provides a polished, high-end look.
• Durable Construction: Double-wall design for long-lasting performance.
• Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
• Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
• Easy Installation: Designed for straightforward installation on compatible vehicles.

You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.

With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.

Features:

• Adjustable to neutralize preload on sway bar (balanced handling)
• The ability to set sway bar geometry and clearance
• Low friction ball joints
• High articulation
• Direct replacement for OEM sway bar links
• Watertight boot seal
• Ball joint is made by a world leader in ball joint technology, THK. THK's OEM Customers: BMW, Porsche, Ford, GM, Nissan, Honda, and Toyota

Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"

These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.