BMW Engine Parts for BMW 7 Series E32 (1988-1994)

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This Bremi coil was used in M42, M50, M50tu, and M60 engines. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number replaces previous BMW part numbers 12131703359, 12131731884, 12131730765, 12131748394, 12131729842, 12131726178, 12131726177, 12131727108, 12131734468, and 12131748395.

Sold per coil. Does not includes connecting boot. If in need of connecting boots please purchase part number 12139067831

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1991-1995 E36 BMW 325i 325i 325ic M3
1991-1995 E34 BMW 525i 530i 540i
1992-1994 E38 BMW 740i 740il
1995 E38 BMW 740i 740il
1991-1996 E31 BMW 840i 840ci

Fuel pressure regulators prevent excessive pressure fro building up in the fuel system. To prevent damage to fuel system components, replace your faulty regulator with a high quality OEM Bosch regulator. OEM replacement for BMW part # 13531729319 and 13531731615.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

• 6-micron filtration – Removes fine particles and contaminants to protect engine components
• High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
• Optimized fuel flow – Maintains consistent fuel delivery for peak performance
• Durable construction – Engineered for long-lasting reliability in high-demand applications
• Easy replacement – Simple installation for routine maintenance
• Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

• Racing applications: Inspect at least twice per season and replace as needed
• Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.