Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

This category contains parts that fit the following chassis:

Sub-Categories

Sort By:

KW Coilover Kit Variant 4 - F80, F82 Non-EDC

T#:587692

Part#: 3A7200ANKT1

Back Ordered

$ 7,194.00 USD

Add to Wish List

Qty

$ 7,194.00 USD

Add to Wish List

Developed exclusively for super sports cars, sports cars and performance sedans, V4 coilovers are the ultimate in coilover technology featuring 3-way adjustable dampening and leading race technology for the highest street and track coilovers available.

Show More Show Less

F90 M5 Experience Package

Call In Or Chat For Best Price!

T#:30164649

Part#: F90-M5-E-BA

Ships on Sep 8, 2026

Sale - Save 10% $ 6,566.99

This product was last offered at the strikethrough price on
07-31-2026

$ 5,909.56 USD

Add to Wish List

Qty

Sale - Save 10%

$ 6,566.99

This product was last offered at the strikethrough price on
07-31-2026

$ 5,909.56 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power-adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Adjustable Lowering Springs Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +6HP and +5lb-ft of torque (Exhaust) Smoother, louder, and sportier sound (Exhaust + X-Pipe) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (X-Pipe) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake) Improved throttle response (Intake) Vehicle lowered 1"in the front and1-1/8” in the rear while retaining factory-like ride comfort, but can be lowered to 2”all the way around(Coil-Over Suspension) Substantial reduction in body roll for improved handling and performance (Coil-Over Suspension) Elevated and stylish high-performance look to the interior (Pedal Pads) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

KW V4 Street Coilover Suspension - F87 M2 (W/O EDC)

T#:567423

Part#: 3A7200BH

Back Ordered

$ 7,194.00 USD

Add to Wish List

Qty

$ 7,194.00 USD

Add to Wish List

NOT FOR VEHICLES WITH EDC The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day-to-day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 0.6-1.5" Front and 0.8-1.8" Rear Two-Step Rebound Valve with Adjustable KW TVR-A Rebound Stage Damping Technology The rebound stage damping is precisely tuned to the respective vehicle on our in-house drive dynamics test facility, with the setting fixed in the mid-range. Individual customization can be achieved in 16 precise click positions, allowing you to choose between more comfort or more body control. The two-step patented TVR-A technology allows the damper oil to flow through an adjustable, conical low-speed valve during slow piston speeds, while during higher piston speeds the main rebound stage valve opens to handle the flow of large volumes of oil. This provides a major improvement in ride comfort without influencing the high-speed in the safety-relevant zone. Two-Step Compression Stage Valve with Low and High-Speed KW TVCLH-A Adjustment Technology This is the high-end motor sports technology for the most demanding street and track performance customers. Two separate valves and a two-way adjustable compression stage valve allow separate compression damping changes in the low and high-speed range. The adjustments are made via two adjustment dials with click increments that feature 16 settings (with 15 clicks) in the high-speed valve housing and 7 settings (with 6 clicks) in the low-speed housing. During tuning at the KW drive dynamics test facility, the groundbreaking V4 coilover suspension is tuned to a mid-level basic setting for the best road performance with an additional recommended setting for occasional track day use. The 3A Clubsport coilover suspension is tuned to a mid-level factory setting especially for track day use, with an additional recommended setting for the drive to the race track. Starting from the factory setting, the damping can be set firmer or softer for low and high-speed. External Reservoir The use of KW reservoirs provides additional volume for additional oil and additional cooling capacity for extremely high-performance setups. The reservoir is filled with low gas pressure and can be fitted anywhere and accommodates the adjustable compression stage valve to provide the damper with more working space.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - F87 M2

T#:598302

Part#: I-75-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

ZX Series Coilover Suspension Kit - E90/E92 Non-M

T#:51356045

Part#: I-03-ZX

Back Ordered

$ 2,595.00 USD

Add to Wish List

Qty

$ 2,595.00 USD

Add to Wish List

For the E90/E92 enthusiast looking to bridge the gap between a high-end street car and a professional race machine, the BC Racing ZX Series offers an unparalleled level of feedback. By moving the compression valving to external canisters, the system effectively manages the heat generated during aggressive driving, maintaining valving accuracy and preventing "damper fade." The 3-way adjustment allows the driver to "dial in" the car for specific obstacles—for instance, softening high-speed compression to soak up aggressive track curbing while keeping low-speed compression firm for sharp turn-in response. Combined with standard front pillowball camber plates, this system eliminates factory rubber "mush," providing direct, unmediated steering feedback and allowing for aggressive alignment specs. Key Features: Triple-Valved Control: Precision adjustment of 30 clicks Rebound, 20 clicks Low-Speed Compression, and 12 clicks High-Speed Compression. Thermal Management: External canisters keep fluid away from hot brake components to ensure consistent lap times and drift consistency. Dual Piston Design: Combines the best characteristics of the DS and ER series for a broad range of damping authority. Motorsport-Grade Components: TIG-welded heavy-gauge steel shock bodies with black chrome finish and 6061-T6 aluminum components. Serviceable Construction: All components are individual and fully replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2006–2011 BMW 3 Series E90 (Sedan) / E92 (Coupe) - Non-M Models. Spring Rates (Default): Front: 5.5 kg/mm | Rear: 9 kg/mm. Spring Type: High-strength SAE9254 cold-wound steel (Swift Spring upgrade available). Adjustability: Independent ride height, spring preload, and 3-way damping. Rebuildable: Fully rebuildable to original manufacturer specifications.

Project Cars

SELECT YOUR BMW

BMW Coilovers

Sub-Categories

KW Coilover Kit Variant 4 - F80, F82 Non-EDC

F90 M5 Experience Package

KW V4 Street Coilover Suspension - F87 M2 (W/O EDC)

BC Racing DS Series Coilover Suspension Kit - F87 M2

ZX Series Coilover Suspension Kit - E90/E92 Non-M

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results