Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.
Included in this kit:
Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3
Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.
This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.
Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.
The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.
Kit includes:
This item fits the following BMWs:
2001-2006 E46 BMW M3
The water pumps BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
This item fits the following BMWs:
2009+ E90 BMW 335d
2009+ E70 BMW X5 xDrive35d
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.
Kit includes
This item fits the following BMWs:
2008-2013 E82 BMW 135i 135is 1M Coupe
2013+ E84 BMW X1 xDrive35i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i Convertible
2011-2013 E70 BMW X5 xDrive35i
2011-2013 E71 BMW X6 xDrive35i
Maintain your BMW's cooling system and avoid costly repairs with our all-inclusive Water Pump and Thermostat Replacement Kit, expertly crafted by enthusiasts at Turner Motorsport. Designed specifically for your BMW model, this kit ensures proper engine operation at optimal temperatures, preventing overheating and extending engine life.
Key Benefits:
Comprehensive Kit: Simplify your cooling system overhaul with all necessary components in one package. High-Quality Parts: Each component meets or exceeds OEM standards, ensuring reliable performance and longevity. Optimal Cooling Performance: Regular water pump and thermostat replacement every 60,000 miles maintains peak cooling efficiency. Enhanced Reliability: Premium components like the Wahler Thermostat and Graf Water Pump ensure durable, long-lasting performance. Why Choose This Kit:
Maximize Cooling System Performance: Replacing your water pump and thermostat simultaneously ensures your BMW’s cooling system operates efficiently. Protect Your Engine: Properly flushing and refilling your cooling system with Genuine BMW coolant guarantees optimal freeze protection and corrosion resistance. Convenient and Cost-Effective: Combining all essential parts in one kit simplifies maintenance and ensures a thorough, lasting repair. Planning a cooling system overhaul? Opt for this comprehensive thermostat and water pump replacement kit for a lasting repair.
 | Top Turner Tip! The very earliest E36s had infamous cooling system failures. But those are a thing of the past! We've got the best combination of parts to ensure a bulletproof E36 cooling system and it doesn't have to cost an arm and a leg. Our basic cooling package (OEM radiator and OE BMW water pump with composite impeller) is much better quality than what was available 20 years ago. And we can upgrade the system with full aluminum radiators, silicone hoses, and a stronger water pump. There are no more excuses for a weak E36 cooling system. |
BMW vehicles are known for their robust performance, but the water pump is a notorious weak spot, often needing replacement every 60,000 miles.
During this service, it's wise to also swap out the thermostat to maintain the efficiency of your vehicle's cooling system. Turner Motorsport simplifies this process with our expertly curated Water Pump & Thermostat Replacement Kit.
This premium kit centers around the renowned EMP Stewart high-performance water pump--a favorite among BMW enthusiasts for its exceptional design. Featuring a stainless steel impeller, this pump enhances coolant flow by 20%. Complementing this is a low-temperature 68°C (154.4°F) Mishimoto thermostat, an upgraded aluminum thermostat housing, and Redline Water Wetter coolant additive. Together, these components make for the ultimate cooling system upgrade for your E36, E39, or Z3!
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This OEM kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.
Included in this kit:
Genuine BMW thermostat
Genuine BMW water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump
The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
This item fits the following BMWs:
2006-2010 E60 BMW 550i
2006-2010 E63 BMW 650i
2005-2008 E65 BMW 750i 750li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.
Our water pump/thermostat overhaul includes:
A well-known issue in BMW models is the water pump, which typically requires servicing every 60,000 miles. To ensure your vehicle's cooling system remains in peak condition, it's also advisable to replace the thermostat during this maintenance. Thankfully, Turner Motorsport has streamlined this process by combining all the necessary parts into one convenient kit.
If you're aiming to maintain and boost your BMW's cooling system, look no further than this premium kit, expertly assembled by the enthusiasts at Turner Motorsport!
As a common failure point among all BMW models, the water pump should be serviced every 60,000 miles. While doing so, it's wise to change the thermostat to ensure proper functionality of your vehicle's cooling system. Thankfully, Turner Motorsport has combined these parts into one simple kit, making your cooling system refresh easier than ever. This Water Pump & Thermostat Replacement Kit Includes:
Meyle Water Pump - Metal Impeller (11510393338) Hamburg-Technic Thermostat (11531743017) Genuine BMW Coolant/Antifreeze (82141467704) Genuine BMW Installation Hardware Looking to maintain your M44 cooling system while enhancing cooling capabilities? Choose this performance kit assembled by the enthusiasts at Turner Motorsport and keep your BMW running cool and efficiently!
As the E46 M3 gets on in years and mileage, the cooling system will be one of the areas that needs the most attention. We have packaged all of the major cooling components into one overhaul kit:
We have found that the E46 M3 can develop inconvenient cooling issues, even on daily driven street cars. While the infamous radiator and water pump failures of the E36 are a thing of the past, the E46 M3 still has its own complications. The best approach to avoid bigger problems is preventative maintenance. We recommend replacing the water pump before 80,000 miles and the radiator before 100,000 miles. By addressing these problem areas before a failure, you will save yourself a larger repair bill in the future.
In addition to the standard cooling package items above, there are several other cooling-related components that may make sense to do at the same time:
This cooling overhaul package fits:
2001-2006 E46 BMW M3
The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
This item fits the following BMW Engines:
N63,N63N,S63,N62N
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
The water pump is a known weak point across all BMW models, requiring servicing every 60,000 miles. Along with the water pump, it’s wise to replace the thermostat to ensure your cooling system operates at peak efficiency.
This kit features a 90°C (194°F) thermostat from Hamburg Technic, which opens approximately 15°C earlier than the standard factory thermostat. This lower temperature is particularly advantageous for performance-focused applications.
What's Included:
Genuine BMW Mechanical Water Pump Assembly (11517846361) Hamburg Technic Performance Thermostat - 90°C/194°F (11537586885) Genuine BMW Coolant/Antifreeze - Diluted, 1 Gallon (82141467704) Benefits of a Lower Thermostat Temperature:
Enhanced Engine Cooling: Opens sooner to reduce engine temperature more effectively. Improved Performance: Keeps engine components cooler, allowing for better performance in high-stress conditions. Extended Engine Life: Reduces thermal stress on engine parts, promoting longevity. Prevents Overheating: Helps to avoid overheating in demanding driving scenarios. Optimized Fuel Efficiency: Maintains ideal engine temperature for efficient fuel combustion. Elevate your BMW's cooling system and performance with this expertly curated kit from Turner Motorsport.
The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.
This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.
Included in this kit:
Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3
**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.
To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.
See kit contents below for all included components.
The water pumps BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.
Kit includes:
This water pump fits the following BMWs:
E70 X5 3.0si X5 xDrive30i without adaptive drive pr 4 zone climate control