Includes the head gasket.

Sometimes you have to take the cylinder head off of your vehicle to diagnose problems, have it rebuilt, or replace a faulty head gasket. It tends to be a fairly labor intensive job, so anytime you can make it easier is definitely helpful.

When it comes time for reassembly, one of the biggest problems is finding quality gaskets and seals. Turner has your solution with this cylinder head gasket kit. With so many gaskets that are one use only to replace, getting them all done at the same time can be made harder by not having everything you need. With the proper, high quality gaskets, your reassembly will go much easier with no need for trip after trip to the local auto parts stores. Intake, exhaust, downpipe, valve cover, and in some applications valve seals will all help to get your engine into top condition.

When it's time to put everything back together, there are some things that should not be overlooked. Most cylinder head fasteners found on European automobiles are a one time use or stretch bolt. To be sure that everything is tightened down properly, it is important to replace them to get the proper torque reading and ensure the longevity of your repair.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

The head gasket is exposed to high pressure and heat for extremely long periods of time. Over a long period of time, these may develop a slight oil leak and must be replaced ASAP to prevent damage to the engine. It should also be replaced any time that the engine head is removed to ensure the best seal possible.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N54 3.0L

Upgrade your BMW's engine performance with Cometic's superior Multi-Layer Steel (MLS) head gaskets, renowned for their exceptional quality and durability. Featuring a .036" thickness and designed for a 78 mm cylinder bore, these gaskets are perfect for both high-performance applications and stock replacements. With Cometic MLS gaskets, you'll experience longevity and reliability, ensuring you do it once and make it last.

These MLS gaskets come with a sealant that bonds effectively to dry surfaces, simplifying the installation process. The three layers of stainless steel, including outer layers of embossed viton-coated stainless steel, provide an unparalleled seal with remarkable rebound characteristics. Corrosion-resistant and capable of reducing bore distortion, these MLS head gaskets are built to withstand extreme cylinder pressures, making them an excellent choice for enhancing your BMW's engine performance.

Benefits:

• Superior quality MLS head gaskets from Cometic
• .036" thickness and designed for a 78 mm cylinder bore
• Ideal for high-performance and stock replacement
• Longevity and reliability for engine durability
• Simplified dry surface installation with bonded sealant

Discover the Cometic MLS Multi-Layer Steel Gasket

Experience excellence with one of the market's premier multi-layer-steel (MLS) gaskets. This gasket is engineered for long-lasting performance, making it a top choice for high-performance and stock replacement applications. With a thickness of .070" and an 87mm cylinder bore, it offers outstanding durability. What sets Cometic MLS gaskets apart is their ability to be installed dry, thanks to the sealant that forms a bond with dry surfaces.

MLS, which stands for Multi-Layer Steel, is comprised of three layers of stainless steel. The outer layers feature an embossed Viton-coated stainless steel that not only provides an exceptional seal but also exhibits excellent rebound characteristics and resistance to corrosion. These MLS head gaskets effectively reduce bore distortion and can withstand extreme cylinder pressures.

At higher miles and over many years, the gaskets and seals in you BMW tend to shrink, crack, split, or become brittle. This can lead to oil, compression, or coolant loss. To maintain the performance of your engine and ensure there are no leaks, replace all of the gaskets with this cylinder head gasket kit that includes every gasket and seal you will need to replace or reseal your cylinder head.

Fits the following BMW chassis
E24 E32 E34

Fits the following engines:
M30 3.4L

Upgrade your engine's sealing performance with the Cometic MLS Cylinder Head Gasket. With a thickness of .036" and a 78.5mm cylinder bore, this gasket is ideal for high-performance applications and stock replacements alike. Its Multi-Layer Steel (MLS) construction provides superior sealing, reduced bore distortion, and resistance to extreme cylinder pressures. Plus, it's designed for easy installation, as it can be installed dry thanks to its sealant-coated surface.

• .036" thickness for enhanced sealing
• Suitable for high-performance and stock applications
• Multi-Layer Steel (MLS) construction for superior sealing and durability
• Resistant to extreme cylinder pressures
• Easy dry installation with sealant-coated surface

This top-end gasket set covers the cylinder head on the S54 engine used in the E46 M3, Z3 M Roadster/M Coupe, and E85/E86 Z4 M Roadster, M Coupe. If you're pulling the head, intake manifold, or doing any other upper end engine work this set can be a time and money saver. This set includes all of the commonly replaced gaskets, seals, and o-rings when overhauling the head. It's also a useful kit to have and dip into any time you're doing upper end engine work. Not having a critical seal or gasket on hand can ruin your work and this gasket set can prevent that from happening. This Victor Reinz set includes the head gasket.

BMW #QtyDescription

071199035461left timing rail upper bolt seal

071199630724VAN0S oil line seal ring

071199631292crankcase vent banjo bolt seals

071199632522screw plug seal ring

071199633421right upper timing rail bolt seal ring

071199634181timing chain tensioner seal ring

111214373952valve cover stud grommet seal

1112783097213valve cover stud grommet seal

111278312716spark plug hole profile gasket

111278320341main valve cover gasket

111278370241oil fill cap seal ring

111278370251crankcaske oil separator seal ring

111417367581VAN0S-camshaft plate o-ring

111578309661crankcase oil separator o-ring, large

111578321191crankcase oil separator plug o-ring

113113173181inside o-ring for internal VAN0S regulating valve

113490644572valve stem seal, 2 sets = 24 valves

113678319381VAN0S unit profile gasket

114113060821outside o-ring for internal VAN0S regulating valve

115313184021thermostat-to-water pump o-ring

115378307083coolant pipe o-ring gasket

115378307092thermostat housing connector o-ring

116114076951intake bellows o-ring profile gasket

116178301041intake bellows-to-airbox gasket

116278306676exhaust manifold port gasket

117275052591air pump valve profile gasket

121417483982camshaft position sensor o-ring

135478314836throttle body o-ring

136414374746fuel injector o-ring, upper

136478306116fuel injector o-ring, lower

111278359181head gasket

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster Z4 M Coupe

Replacement Head Gasket Set Fits E36 318i 318is 318ic 1996-1998 with M44 engine, and Z3 1.9 1996-1998. Includes all the gaskets and seals needed when rebuilding the cylinder head. Includes head gasket.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Complete Parts List

(click to expand)

BMW p/nQtyDescription

071199631302screw plug gasket ring

071199633551timing rail screw plug o-ring

111212479481gasket

111214339501head gasket

111217214751spark plug hole / valve cover screw
profile gasket

111217214763spark plug hole profile gasket

111217218761main valve cover gasket

1112172187915valve cover screw seal

111412478371profile gasket between
outer upper and lower timing covers

111412478491profile gasket between
inner upper and lower timing covers

111417430651upper timing cover profile gaskets

113490654382valve stem seals
2 sets = 16 valves

115117396911o-ring

115317431791thermostat housing o-ring

116112474782upper and lower intake plenum profile gasket

116117346841lower intake plenum profile gasket

116214353662exhaust manifold gasket plate

117214353671gasket

117275052591gasket

121417483981camshaft position sensor o-ring

135317202511fuel pressure regulator o-ring, large

135317202521fuel pressure regulator o-ring, small

135417398091throttle body o-ring profile gasket

136417307674fuel injector o-ring

136417433774fuel injector o-ring

183017119691exhaust manifold flange gasket

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ic 318ti
1996-1998 Z3 BMW Z3 1.9